SkyRC eFuel 230W User Manual

INSTRUCTION MANUAL
230W, 17A AC/DC SWITCHING POWER SUPPLY
SK-200017
INTRODUCTION
Thank you for purchasing the eFUEL 13.8V/17A Switching DC Power Supply. We are confident that you will be very pleased with its performance because our Switching DC Power Supply is designed and manufactured by skilled professionals using the highest standard in workmanship. You can be assured of many years of trouble free service. Your eFUEL switching DC Power Supply is designed to use household AC power source to power equipments that required DC power. The eFUEL converts standard household power 100-240V AC to
13.8V DC power and can supply max 17 amperes of continuous power. It delivers smooth and reliable power and enables RacingStar RS16 Charger and RacingStar RSTW Tire Warmer to dock directly without the use of messy DC cables and it can also be used with other DC devices.
DC Output 1
LED Indicator
Smart Cooling Fan
Dual Banana Plug
USB Power 5V / 2.1A
DC Output 2
AC Power Input Socket
Power Switch
FEATURES
Active PFC Design: smaller AC input current less interference, and conform to CE regulations Compact size and light weight Two DC power outputs, total output power up to 17 amperes. Output 1 is located on the top and the output 2 is located on the right side of the power supply ON/OFF Power Switch 9 LED indicates output power from minimum to maximum Built-in USB power, 5V/2.1A for iPad, mobile phone, digital camera and etc AC 100-240V worldwide operation: need not any alternative switcher, worldwide safe operation Smart cooling fan turned on upon the temperature automatically with low-noise Over current and over temperature protection Short-circuit protection on output, safer and reliable Direct Plug Docking System which enables RacingStar RS16 Charger and RacingStar RSTW Tire Warmer to dock directly
1
CONNECTIONS
Caution: Make all other connections before you connect the power supply to standard AC power
Always connect the red (+) positive lead from your charger or other DC device to the red (+) positive terminal on the power supply, and the black (+) positive lead from your charger or other DC device to the black (+) positive terminal on the power supply.
Warnings: To avoid damage to both the power supply and the device:
Follow the correct polarity when connecting the power supply and the device. Do not let the ends of the positive and negative wires touch each other.
Working with RacingStar RS16 Charger and RacingStar RSTW Tire Warmer
There is DC output on the top of the power supply and it is designed for use with RacingStar RS16 Charger and RacingStar RSTW Tire Warmer. A pair of dual banana plugs which is used to connect the Charger/Tire Warmer and power supply are included in the package.
Please install them as following picture,
RacingStar RS16 Charger
Dual Banana Plugs
eFUEL 13.8V/17A Power Supply.
RacingStar RSTW Tire Warmer
Dual Banana Plugs
eFUEL 13.8V/17A Power Supply.
2
Loading...
+ 4 hidden pages