Sky Phone SKYF1C User Manual

1.1. Profile 3

1.2. Safety Information 3

1.3. Safety warning and Attentions 3

1.1. Phone overview 6

1.2. Functions of Keys 6

1.3. Technical specifications 7

1.1. Installing the SIM Card and the Battery 8

1.2. Installing T-Flash Card 10

1.3. Charging the Battery 10

1.4. Powering On/Off the Mobile Phone 13

1.5. Linking to the Network 13

1.6. Dialing Calls 13

1.7. Using the Headset 13

Content

1. General Information 3

2. Your phone 6

3. Getting started 8

-1-

1.1. Key for Input Methods 14

1.2. To Shift Entry Methods 14

1.3. Numeric Input 14

1.4. English input and numeric input: 14

1.5. Inserting a Symbol 16

1.1. Phonebook 17

1.2. Call logs 17

1.3. Multimedia 18

1.4. Contacts 20

1.5. Audio 20

1.6. Message 20

1.7. File manager 21

1.8. Application 22

1.9. Settings 23

1.13. Profiles 25

4. Input method 14

5. Using the Menus 17

6. Appendix 26

-2-

1. General Information

1.1. Profile

Please read this pamphlet carefully in order to make your phone in perfect condition.
Our company may change this mobile phone without prior written notice and reserves the final right to

interpret the performance of this mobile phone.

Due to different software and network operators, display on your phone may be different, refer to your

phone for details.

1.2. Safety Information

If your phone has lost or been stolen, notify the telecommunication office the SIM card is disabled

(network support is required). This can avoid economic loss caused by unauthorized use.

Please take measures as following to avoid your phone being unauthorized used:

· Set PIN code of SIM card

· Set phone password

1.3. Safety warning and Attentions

Safety warning

➢ ROAD SAFETY COMES FIRST

Do not use a hand-held phone while driving. Use hands-free fittings when calls are unavoidable while

driving. In some countries, dialing or receiving calls while driving is illegal!

-3-

➢ SWITCH OFF IN AIRCRAFT

Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky.

Please make sure that your mobile phone is powered off in flight.

➢ SWITCH OFF BEFORE ENTERING RISKY AREAS

Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas. T urn
off your mobile phone before entering a place susceptible to explosion, such as an oil station, oil tank, chemical
plant or a place where a blasting process is under way.

➢ OBSERVE ALL SPECIAL REGULATIONS

Follow any special regulations in force in any area such as hospitals and always switch off your phone
whenever it is forbidden to use it or, when it may cause interference or danger. Properly use your mobile phone
near medical apparatuses, such as pacemakers, hearing aids and some other electronic medical devices, as it
may cause interference to such apparatus.

Follow any special regulation in force in any area such as hospital and always switch off your phone
whenever it is forbidden to use it or, when it may cause interference or danger. Properly use your mobile phone
near medial apparatuses, such as pacemakers, hearing-aids and some other electronic medical devices, as or
may cause interference to such apparatuses.

➢ INTERFERENCE

The conversation quality of any mobile phone may be affected by radio interference. An antenna is built
inside the mobile phone and located below the microphone. Do not touch the antenna area during a
conversation, lest that the conversation quality deteriorate.

➢ QUALIFIED SERVICE

Only qualified personnel may install or repair phone equipment. Installing or repairing the mobile phone
on your own may bring great danger and violate the warranty rules.

-4-

➢ ACCESSORIES AND BATTERIES

Use only approved accessories and batteries.

➢ USE SENSIBLY

Use only in a normal and proper manner.

➢ EMERGENCY CALLS

Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial
key. Give your location and state your situation briefly. Do not end the call until told to do so.

Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features
described in this manual due to network or radio transmission problems. Some networks even do not support
the emergency call service. Therefore, do not re ly solely on the mobile phone for critical communications such
as first aid. Please consult the local network operator. Just like all other mobile phones, this mobile phone
does not necessarily support all the features described in this manual due to network or radio transmission
problems. Some network even do not support the emergency call service

Precaution

This mobile phone is well designed with fine art. Please exercise special care when using it. The

following suggestions will help your mobile phone survive the warranty period and extend its service life:

➢ Keep the mobile phone and all its fittings beyond children's reach.
➢ Keep the mobile phone dry. Keep away from rain, moisture, liquid or other substances that may corrode

electronic circuits.

➢ Do not use or store the mobile phone in dusty place, lest that active parts of the mobile phone be damaged.
➢ Do not store the mobile phone in a high-temperature place. High temperature will shorten the life of

-5-

electronic circuits and damage the battery and some plastic parts.

➢ Do not store the mobile phone in a chilly place. Otherwise, moisture will be formed inside the mobile

phone to damage electronic circuits when the mobile phone is moved to a constant temperature place.

➢ Do not throw, knock or shock the mobile phone, as that will destroy the internal circuit and high precision

components of the mobile phone.

2. Your phone

1.1. Phone overview

The phone has many powerful function and good appearance.

1.2. Functions of Keys

◆ Dial1 key

Press dial 1 to originate a call by entering the called number or selecting a contact from the phonebook;
or press dial 1 to receive an incoming call; or press it in standby state to show the latest call records.

◆ End key

Press it to end a call being dialed or end an ongoing call; or press it to exit the menu and return to

the standby state. You can hold it for two or three seconds can power on/off the mobile phone

-6-

◆ Direction key

Press them to scroll the options when browsing a function list. In edit state, press direction keys

to navigate.

◆ Dial 1 key and Right soft key

The bottom line on the screen displays the functions of the dial 1 key and Right soft key.

◆ OK key

Press it to confirm a selection.

◆ Number keys, * key and # key

Press number keys 0 through 9 to input or edit state to input numbers and characters;
In idle screen, you can press left soft key then press * to lock/unlock keypad.

Press two times the key * to input "+" in standby interface. When the symbol "+" appears,Press
the * key quickly to input "P" or "W" starting the second word,"P" and "W" are used for calling the
extension; "+" are used for dialing an international call.

1.3. Technical specifications

Phone Dimensions:112.1mm*49.6mm*13.7mm (W×D×H):
Weight: 67.5g
Lithium battery: Yes
Rated capacity: 800mah
Continuous standby duration: 72 hours (Relates to network status)
Continuous conversation duration: 3~4 hours (Relates to network status)

-7-

3. Getting started

1.1. Installing the SIM Card and the Battery

A SIM card carries useful information, including your mobile phone number, PIN (Personal Identification
Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile
Subscriber Identity), network information, contacts data, and short messages data.

Note:

After powering off your mobile phone, wait for a few seconds before removing or inserting a SIM card.

Exercise caution when operating a SIM card, as friction or bending will damage the SIM card.

Properly keep the mobile phone and its fittings such as the SIM card beyond children's reach.

Installation

◆ Hold the End key for a while to power off the mobile phone.

◆ Take the back cover above the battery away.

◆ Take the battery away.

◆ Insert the SIM card into the SIM card slot lightly with the corner cutting of the card aligning to the notch

of the slot and the gold plate of the card facing download, till the SIM card cannot be further pushed in.

◆ With the m etallic contac ts of the ba ttery f acing th e metallic contacts in the battery slot, press the battery

down until it locks into place.

-8-

Using code

The mobile phone and the SIM card support sorts of passwords, in order to prevent the phone and the

SIM card from being misused. When you are prompted to input any of the codes mentioned below, just input
the correct code and then press the OK key. If you input a wrong code, clear it and then input the correct code.

◆ Phone lock code

The phone lock code may be set to prevent your mobile phone from being misused. In general, this code

is provided along with the mobile phone by the manufacturer . The initial phone lock code is set to 0000 by the
manufacturer . If the phone lock code is set, you need to input the phone lock code when powering on the mobile
phone.

◆ PIN

The PIN (Personal identification number, 4 to 8 digits) code prevents your SIM card from being used by
unauthorized people. In general, the PIN is supplied with SIM card by the network operator. If PIN check is
enabled, you need to input the PIN each time when you power on your mobile phone. The SIM card will be
locked if you input wrong PIN code for three times.

Unlocking methods as follows:

-Input the correct PUK according to the screen tips to unlock the SIM card.

-Then input the new PIN and press the OK key.

-Input the new PIN again and then press the OK key.

-If the input PUK is correct, the SIM card will be unlocked and the PIN will be reset.

Note: The SIM card will be locked if you input wrong PIN code for three times. To unlock the SIM card,

you need to input the PUK. In general, the PUK can be obtained from the network operator.

◆ PUK

The PUK code (Personal Unlocking Key) is required to change a blocked PIN. It is supplied with SIM

-9-

card. If not, contact your network operator . If you input wrong PUK code for 10 times, SIM card will be invalid.
Please contact the network operator to replace the SIM card.

◆ Barring code

A barring code is required for setting the call barring function. You can obtain this code from the network

operator to set the call barring function.

1.2. Installing T-Flash Card

The T-Flash card is a pluggable mobile storage card inside the mobile phone.

uInsert the T-Flash card into the T-Flash card slot lightly with the corner cutting of the card aligning to
the notch of the slot and the gold plate of the card facing download, till the T-Flash card cannot be further
pushed in.

Note:

1. The mobile phone cannot automatically identify the T -flash car d being inserted when the mobile phone
is powered on. You must power off the mobile phone and then power it on, so that the phone can identify the T­Flash card.

2. The T-Flash card is a miniatur e object. Keep it out of the reach of children for fear that children swallow it!

1.3. Charging the Battery

The lithium battery delivered with the mobile phone can be put into use immediately after being unpacked.

Battery level indication:

◆ Your mobile phone can monitor and display the battery state.

◆ Normally the remaining energy of the battery is indicated by the battery level icon at the upper right

corner of the display screen.

-10-