Sky Phone SKYBAND1 User Manual

Fitness band Sky band 1 User Manual

【Compatibility】

The Smart Wristband only supports the following selected mobile devices:

IOS: OS must be IOS 7.0 or later, Bluetooth 4.0; Such as, iPhone4S, iPhone5, iPhone5S,

iPhone6, iPhone6Plus, iPod touch5, etc.

Android: OS must be Android4.3 or later, Bluetooth 4.0; Such as, Samsung S4, Note3,etc.

Time: 00:00 Steps: Distance:

Calories: Alarm clock: Sleep monitor:

Move Alert: Call ID Display: Message Push:

Bluetooth: Remote camera controller： Bluetooth broadcast:

Looking Phone:

【Quick Start Guide】

1.You should charge the bracelet for 30mins before using it. Pull out the host as shown below,

Insert the host to a 5V/1A USB port for charging. The indicating light stops flashing when it is

full charged for 30 minutes.

Manufacture: Sky Phone LLC
ADD: 1348 Washington Av.suite 350 Miami Beach,fl33139
Tel: [phone] Fax[phone]

Keep the bracelet screen

horizontally.

Then turn wrist over.

The bracelet will be turned on

automatically, then time

shows up.

2.Install APP: Go to App store or play store, download this APP: “Zeroner” and install it. To use

Zeroner APP, make sure your mobile device connected with internet via Wi-Fi or 3G.

3.Account set-up: Open the “Zeroner” App. Login if you have an account, or register a new

account.

4.Bracelet Operation Instruction.

You can use the bracelet by“wrist gesture” or “screentouching”.

Itis convenient to check the time by “wrist gesture”.

Manufacture: Sky Phone LLC
ADD: 1348 Washington Av.suite 350 Miami Beach,fl33139
Tel: [phone] Fax[phone]

“Screen Touching”

Function

Operation

Starting-up

Long press the bracelet screen

Light up

the screen

Click the screen or turn the wrist

over

Shutdown

Swipe left and right to the interface then switch to Long

press the screen to turn off the device

Switchfuncti
on

Swipe left and right

Flip-Over

Click the screen

Confirm

Long press the screen

PS:Function may be changed and upgraded according to the bracelet firmware’s update.

5.Pairing.

Keep your phone with Bluetooth and WIFI “on” for this step. Keep the screen lighting and the

fitness band show icon of radar.

Manufacture: Sky Phone LLC
ADD: 1348 Washington Av.suite 350 Miami Beach,fl33139
Tel: [phone] Fax[phone]

Login the App Zeroner, and the
system shows the main page.Tap
the left corner button or slide the
screen from left to right, and click
【Device Connection】

Double click the screen on the

bracelet,the radar icon “ ”shows up

on the bracelet,Tap the button

【Searching device】 on APP,select
your right ID from the device list, and
wait for 1-2 seconds

Android device will pop up

【Confirm pair with “right
ID”】,and it will be connected.

IOS device will pop up【Pair Device
Success】,【Bluetooth Pairing
Request】,click ”pair”, and finish paring.

Manufacture: Sky Phone LLC
ADD: 1348 Washington Av.suite 350 Miami Beach,fl33139
Tel: [phone] Fax[phone]