Sky Phone SKY50PROII User Manual

Contents
1 Safety Precautions ......................... 2
2 Overview ......................................... 4
3 Installing the SIM card ................. 5
4 Installing the storage card ............ 7
5 Charging ......................................... 7
6 Power on / Power off ..................... 8
7 Android Home Screen Guides ...... 9
8 Changing OSD Language &
System Time .................................... 10
®
9 Connecting to Wi-Fi 10 Transferring Contents from PC 11
11 Troubleshooting ......................... 12
12 Technical Specifications ............ 14
13 FCC WARNING ........................ 15
14 Specific Absorption Rate (SAR)
information .......................... .......... .. 17
1
Notice
The phone pictures, as well as data on the phone appearance, color and design features found in the manual are for reference only. We reserve the right to change the appearance and technical parameters of the product without prior notice.
1 Safety Precautions
Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of its use. As a general rule, always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment. Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture. Do not expose your phone to extreme temperatures lower than - 30°C and higher than + 50°C. The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone automatically protects the batteries in extreme temperatures. Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested). Electrical s afety: Only use the chargers listed in the manufacturer’s catalogue. Aircraft safety: When traveling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs.
Personal safety: To prevent possible
2
hearing damage, do not listen at high volume levels for long periods.
Explosive materials: Please comply with warning signs at gas stations asking you to switch your phone off. You will need to comply with radio equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations are under way. Electronic equipment: To avoid the risk of demagnetization, do not let electronic devices close to your phone for a long time. Electronic medical equipment: Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids, pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone and an implant. Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this area. Hospitals: Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff. Road safety: Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call. You must comply with any current legislation. Distance of operation: This phone model has been tested and meets radiofrequency exposure guidelines when used as follows:
• Against the ear: Place or receive a phone call and hold the phone as you would a wire line telephone.
• Body worn: When transmitting, place the phone in a carry accessory that contains no metal and positions the
3
phone a minimum of 10mm from your body. The use of other accessories may not ensure compliance with radiofrequency exposure guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a minimum of 10mm from your body.
• Data operation: When using a data feature, position the phone a minimum of 10 mm from your body for the whole duration of the data transmission.
2 Overview
Front and Side panels
4
Touch Screen Light Sensor Earpiece Charging Indicator Light Frontal Camera
Back Panel
Back Camera Flash Light Speaker Microphone
3 Installing the SIM card
You need to remove the back cover before you can
install the SIM card and battery. Also, make sure to
5
always turn off the power before installing or
replacing the SIM card and battery.
To prize up the back cover
1) Make sure your device is turned off.
2) Use your nail or pick to open up the back cover,
since there is a slot at the right bottom corner of
back cover.
To install the SIM card
Your device is supported both 2G and 3G
(WCDMA) SIM cards.
1) Remove the battery if it is installed.
2) Locate the SIM card slot, and then insert the
SIM card with it's direction as the following
figure.
3) Slide the SIM card completely into the slot.
6
Loading...
+ 14 hidden pages