SkyLink SK-250 User Manual

Alarm System Starter Kit

Model: SK-250

iPhone not included

Protect your Home the Smart Way!

User Manual

P/N: 101Y269-001 ©2017 SKYLINK GROUP.

1. Package Contents

1x Internet Hub 2x Motion

Sensors

2x Door/Window

Sensors

1x Keychain

Remote

Mounting

Accessories

2x Power
Adapters

1x Indoor Wireless
Pan & Tilt Camera

1x Ethernet

Cable

NOTE: 6 x AAA- and 1 x AA-Batteries required to setup the SkylinkNet Alarm System.

2. Install the Internet Hub

1. Connect your Hub to an available Port on your Internet Router using the Ethernet cable.

2. Plug in the Power Adapter.

3. Insert 4 x AAA-Batteries in the Hub for backup power in case of power outage. (Optional)

3. Insert Batteries for Sensors

1. Slightly push both sides of the Door/Window Sensor and pull out the cover to insert an AAA-Battery.

2. Use a coin to open the Motion Sensor and insert an AA-Battery.

4. Download the SkylinkNet App

1. Tap on App Store 2. Tap on Search Icon and
search for “SkylinkNet.”

3. Tap on Free Button
to download the App.

4. When download is completed,
it will show on your HomeScreen.

NOTE: Only the “SkylinkNet” App will work with
the Internet Hub.

5. Create a SkylinkNet Account

1. Open the SkylinkNet App
and tap on “Create Account.”

2. Enter your information
and tap on “Sign Up.”

3. Check your email to activate
your account and tap on

“Continue” to log in.

4. Click on the link from the email to activate your account.

5. Now you are ready to
login to your account.

6. Set up the Internet Hub

1. Tap on “Set up Hub.” 2. Tap on “Initialize a
new Hub.”

3. Follow the instruction on
screen to connect the
Internet Hub.

5. Follow the instruction on
screen to reset the Internet
Hub and tap “Continue.”

4. Enter your information
and tap on “Continue.”

6. Hub is added and you will see
a green or red dot indicating if
it’s connected to the Hub.

7. Add Sensors and Keychain Remote

1. Go to “More” and tap
on “System Settings.”

2. Tap on “Setup Wizard.”

4. Tap on “Sensors” or
“Security Remote.”

3. Tap on “Add Device.”

5. Select the type of
sensor you want to add.

6. Name your sensor and
location and tap “Continue.”

7. Tap the “Learn Now”
button and follow the video
to activate the sensor.

(If you select Security Remote, skip to Step 6)

8. Now trigger the sensors
to test if the SkylinkNet App
is showing the sensor status
correctly.

NOTE: If motion is detected, a red
LED light inside the sensor will flash.
Sensor will not be triggered by new
motion unless no motion has been
detached for 15 seconds.

8. Setup Hub Keypad Password

1. Go to “More.” 2. Tap on “System Settings.” 4. Enter Passcode
and tap on “Save.”

3. Tap on ”Hub
Keypad Password.”

1. Go to “More.” 2. Tap on “System Settings.” 4. Set your time zone and
tap on “Save.”

3. Tap on “Time Settings.”

9. Setup Time Zone

10. Home Screen Overview

Settings

Push Notification

Online/Offline

Sensors

Receivers

Menu Bar

Sensor activation

The blue sensor icons will
turn red if its activated.

Receive push notification anytime a
new activity takes place.

Settings for individual sensor,
remote or receiver.

Shows the hub name
and connection.

Choose between
different screens.

.

Sensors icons
are blue/red.

Push icons are
black.

11. Sensor Settings

Alarm Settings

Push Notification

Chime

Learn

Rename

Delete

Select when this sensor
should activate an alarm.

Select if you want to

receive a push notification

during an alarm only or always

when a sensor is activated.

If enabled, the Internet hub

will sound an alert chime when

this sensor is activated.

Learn the sensor with the

Internet hub.

Change the name of this sensor.

Delete this sensor from the hub.

Tap on the gear
icon to edit the
settings of this
specific sensor.

(Learn the sensor if you have selected
“Learn Later” in Step 7 of “Add Sensors
and Keychain Remote).

12. Place the Sensors

Place each of the device in the appropriate locations (see example below).

The motion sensor can be

mounted with a double-sided tape

or screws on a ceiling.

Mount the Door/Window Sensor on your door or

window with a included double-sided tape.

It can be also installed to monitor or protect

cabinets and safes.

Status of the
Alarm System

Arm Home,
Arm Away / Exit Delay

Slide to activate
the hub siren in
emergency.

13. Alarm Screen Overview 14. Arm Home / Arm Away

Arm Home

Arm Away / Exit Delay

Select “Arm Away” to protect your home when you’re away.

This mode activates or triggers the alarm after a

default set of time, giving you enough time to get in and out of

your house to arm/disarm the alarm system.

Select “Arm Home” to protect while

you’re at home. This mode deactivates

motion sensors but leaves other

sensors activated.

15. Disarm Alarm System

When an alarm is activated, a
push notification will be sent to
all users and your smartphone will
play an alarm sound.

Tap the “Disarm” Button to
disarm the alarm system.

16. Keychain Remote

See all the recent
activities of the
Alarm System
on the Event Log.

17. Event Log

3. Tap on “Event Log.”2. Tap on “System Settings.”1. Go to “More.”

Arm and disarm
the alarm system
with a keychain
remote.

Arm Away

Arm Home

Disarm

Panic Button

Press and hold the Panic Button
for 5 sec. to activate it

.