1. Preface
To customers
Welcome to purchase our 2.0 soundbar. We are very grateful for your
patronage. In order to fully utilize your device’s functions, please read
this instruction manual carefully before use.
This will make it easy for you to master the connection methods and
key points. You will also find that we have made various explorations to
meet your requirements in terms of design, manufacturing process, and
humanization of operation, etc. Keep this manual properly. Please keep
this manual in a safe place for future reference.
Open the package
Please carefully open the package, confirm the following accessories,
and place them in one place to prevent lose.
2. Accessory
□ Soundbar 1pc
□ User Manual 1pc
□ Remote Control 1pc
□ Power Adaptor 1pc
□ RCA Cable 1pc
□Wall-mounted Screws 1pc
3. Product introduction
This soundbar supports Bluetooth playback, optical fiber decoding,
HDMI(ARC) input, USB playback and external audio source input and
amplification. It adopts digital signal processing technology and is
suitable for music playing in different environments such as offices and
homes.
4. Attention
Thank you for purchasing our products.
Please read the instruction before using this product and use it
correctly. For better service, the contents of this user's manual may
change without further notice due to changes in product performance
and functionality. In order to maintain good performance, do not use in
Warning:
changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Loading...