Page 1
Table of Contents
Bluetooth Speaker User Manual
T
.
manual is accurate at time of printing
.
Model No.: BC09
his image is for illustration purposes only and may differ from the actual product
Read this manual before use, keep this information in a handy place for future
reference. Every effort has been made to ensure that the information in this
Introduction ...................... .......... ............ ............. .......... ............. ............ .......... 2
Precautions...... ............ ............. .......... ............ ........... ............ ............. .......... .... 2
Warning ................... ............. .......... ............ .......... ............. ............ .......... .......... 2
Contents List ..... ............ ............. ......... ............. ............ ........... ............ .......... ... 3
Definitions of Keypads and Jacks ... ............. ............ ........... ............ ............ 3
LED indicator lamp ............ ............ .......... ............. ............ ........... ............ ....... 4
Hands-free microphone ................. ............. .......... ............ ............ ........... ...... 4
Some Initialized states ................... ............. .......... ............ ........... ............ ...... 4
Power on function ..... ............. ............ .......... ............. ........... ........... ............. ... 5
Start Up... ............ ............. .......... ............ ............. .......... ............. .......... ............ .. 5
Power Off ............. ............ .......... ............. ............ .......... ............. ............ .......... . 5
Bluetooth Pair Mode ....................... .......... ............. ............ .......... ............. ...... 5
Precautions...... ............ ............. .......... ............ ........... ............ ............. .......... .... 6
Search Mode.... ............ ............. .......... ............ ............. .......... ............. .......... .... 6
Standby Mode .................. ............ .......... ............. ........... ........... ............. .......... 6
Connection Mode .................. ............. .......... ............ ........... ............ ............ .... 7
Users use Hands-free Function ......... ............. .......... ............ ............. .......... 7
Aux-in Mode........ ............. ........... ........... ............ ........... ............ ............. .......... . 7
Equipment Support .......... ............. .......... ............ ............. .......... ............ ......... 8
Product Specification ...... ............. ............ .......... ............. .......... ............ ......... 8
Page 2
D
T
1
2
;
a
e
a
3
R
s
e
m
4
e
d
5
t
6
1
2
3
L
L
L
L
h
c
H
N
e
n
S
I
I
ntroduction
s
e
r
S
w
c
d
P
s
s
t
p
u
o
,
t
W
t
device, the disconnect device shall remain readily operable.
C
1
2. USB Cable 1 piece
The Jenkins J5 Portable Wireless Speaker is a Bluetooth enabled sound
ystem supporting stereo music, and hands-free call answering. In addition it is
quipped with digital signal processing technology, and an echo and noise
emoval feature. Ideal for use in the home and office, the J5 works with
martphone’s, tablets and other Bluetooth devices. The portable speaker comes
ith a built-in lithium battery touch panel button and can be recharged via a USB
onnection. The J5 also includes an AUX Input for standard MP3 or other audio
evice connection.
recautions
First thanks for buying the digital sound system produced by this company!
Please refer the User’s Instructions before using it properly. The content
tated herein may be modified from time to time for better service as the produc
roperties and functions are changed and this company will not notify yo
therwise.
For the sound performances of the product, never use it in too cold, too hot
oo dusty or humid places, especially:
1. Moist or underwater places
2. Near the heater or hi-temperature service
3. Polarization
4. Places apt to fall
5. Never disassemble the combination audio
Otherwise, it may invalidate the warranty
arning:
NOTE:This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
1. Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
2. Where the mains plug or an appliance coupler is used as the disconnec
2
ontents List
. Speaker 1 piece
efinitions of Keypads and Jacks
here are 5 keys, 2 jacks and one switch defined as below:
. : Press it shortly to power ON/ OFF.
. : Press it shortly when there are incoming calls to talk by hands-free feature
nd press it shortly in hands-free call status to hang up; press it shortly when ther
re incoming calls for more than 3 seconds to refuse the incoming calls;
. : Press “ ” key for more than 3 seconds in SEARCH mode for PAI
tatus; Press “ ” key shortly in Bluetooth playing status to stop or paus
usic;
.
own the volume rapidly;
. : Press it shortly for Volume Up and press it for a longer time to tune up
he volume rapidly;
. : MIC for speak the phone;
: Press it shortly for Volume Down and press it for a longer time to tun
3
. DC/BATT:
. DC 5V: DC 5V power supply, built-in lithium battery power supply jack
. AUX IN: 3. 5mm jack to connect the input jack of external sound source;
ED indicator lamp:
ED (Red): The red power indicator LED will keep ON in standby status;
ED (Green): The green LED indicator lamp will keep ON in startup status;
ED (Blue): The blue LED indicator lamp will flicker during the Bluetoot
onnecting and pairing and then will keep ON after it;
ands-free microphone
ote: The user is recommended to keep within 5m from the product to keep th
ormal service quality!
ome Initialized states
nitialization: The red LED indicator lamp keeps ON.
Switch for changing the DC5V and Built-in lithium battery;
(Beside is the LED indicate light for the Lithium Battery
Charging);
: It’s designed to locate in the left as a small hole;
4
Page 3
P
ower on function
(
A
C
j
,
s
e
m
R
e
D
2
l
B
m
b
n
p
S
P
1
2
d
f
l
c
3
d
m
e
C
l
c
P
S
e
L
B
U
1
2. During startup for the first time use,
1
2
r
i
3
e
p
m
4
e
c
5
6
d
s
y
P
1
l
a
t
c
2
3
e
p
S
P
m
t
i
T
S
T
5
s
t
o
E
i
i
i
i
i
i
i
N
N
A
N
N
N
N
B
B
S
S
S
R
f
P
B
O
W
Supporting Profiles: HSP/HFP 1. 5, A2DP and AVRCP Profiles
C
T
a
c
（
（
e
（
t
I
S
S
U
1
2
o
3
e
A
W
y
p
.
T
o
a
W
m
w
connected last time.
Two ways are available)
. Connect the USB cable to Computer, plug another side of the USB cable to D
ack at the back of machine, at this time the red power LED indicator will be on
witch the “BATT/DC” switch to “DC”, and then press “ ” key to power on th
achine.
emarks: 1. Under any function status, connect the unit with USB Cable or Us
C 5V power Adaptor (not included), 3.7V built-in lithium will be charged.
. It takes about 3hours to charge from no power to full power for 3.7V built-in
ithum battery.
. Switch the “BATT/DC” switch to “BATT”, then it is used the built-in 3.7V lithiu
attery to support, at this time the red power LED indicator will be on, and the
ress “ ” key to power on the machine.
). Put the mobile phone within 3 meters;
). Press “ ” key for more than 3 seconds, the blue lamp will flicker to ente
nto PAIR status;
). Activate the Bluetooth functions of Bluetooth mobile phone so that the mobil
hone starts to search for the Bluetooth device; please refer to the user’s
anual of mobile phone;
). Select “Jenkins Portable” from the device having already been searched by th
ell phone;
). In case of some kinds of cell phones, users have to key in the identification
code “0000” and press ENTER key to match the product and mobile phone
and after succe ss, the green /the blue LED lamps will keep ON.
). Press RETURN key of mobile phone to exit from the mobile phone menu an
make sure that the distance between the hands -free and mobile phone i
within 10 meters and free from any obstacle, users can answ er calls and pla
music at this moment.
tart Up
ress “ ” key shortly after power-on to startup,
. During the first use, the blue LED lamp will flicker to access to PAIR mode.
. In case of once PAIR was successful, the blue LED lamp will turn on an
licker once every one second to access to SEARCH mode, the Bluetooth wil
onnect the equipment and mobile phone used last time automatically.
. Access to SEARCH mode: The Bluetooth will connect the equipment an
obile phone used last time automatically, and the product will come into th
ONNECTION mode when it connects successfully within 10 seconds and wil
ome into the standby mode if not.
ower Off
hortly press “ ” key in the standby mode to access POWER-OFF mode and th
ED lamp on the top of machine will be OFF.
luetooth Pair Mode
sers can enter into this status from two states:
. Press “ ” for more than 3 seconds in SEARCH mode or standby mode.
5
onnection Mode
he blue LED lamp keeps ON after PAIR; when the earphone icon does not
ppear on the mobile phone screen before use, just activate the Bluetooth
onnection as below:
1）Use the mobile phone to select “Jenkins Portable” in the phone PAIR list for
connection;
2）Shortly press “ ” key and select “Accept to connect” on the mobile phon
screen.
3）To disconnect, just press “"key for a longer time, or select to disconnec
on the mobile phone and enter into the standby mode.
n Bluetooth music play mode, users can
hortly press or press “ ” or “ ” key for a longer time to adjust the volume.
hortly press “ ” key to play/ pause the music play.
sers use Hands-free Function
. Answer Calls
The speaker will ring up when there are incoming calls during music play, just
press “
. Hang up Calls
Press “
the music play mode.
. Refuse Calls
When there are incoming calls, just press for a longer time “
than 3 seconds to refuse calls.
” key shortly to answer.
” key shortly during hands-free call to hang up calls and then return t
ux-in Mode
hen AUX IN line is connected to AUX IN Jack, the system will automaticall
ause the Bluetooth, the blue LED turns off and the unit enters into AUX IN mode
hen users can press or press “ ” key or “ ” key shortly or for a longer time t
djust the volume.
hen users disconnected AUX IN line completely out of AUX IN Jack, the syste
ill re-enter into the Bluetooth SEARCH mode and search for the equipment
7
” key for mor
recautions
. When the product enters into Bluetooth mode after startup and it wil
utomatically enter into the standby mode 10 seconds later when it canno
onnect to Bluetooth device.
. This product will enter into the CONNECTION mode in case of PAIR success.
. When the paired equipment number exceeds the maximum capacity, i.e. 8, th
roduct will automatically clear the first equipment in its memory.
earch Mode
ress “ ” key for a longer time during startup or PAIR mode to enter into this
ode. The blue lamp will flicker once every second; while in the SEARCH mode,
he product will try to connect the equipment connected last time; and will enter
nto the CONNECTION mode if the equipment is found.
his unit will enter into the standby mode 10 seconds after search.
tandby Mode
he blue LED lamp will flicker slowly and the blue lamp will flicker once every
econds; while in the standby mode, it will accept to connect to all equipmen
nce paired, 8 at most in records.
6
quipment Support
Pad 1
Pad 2
Pad 3
Phone 4
Phone 4S
Phone 3G
Phone 3GS
OKIA N95
OKIA N78
ndroid OS
OKIA 5800
OKIA 6110
OKIA 5300
OKIA 6230
lackberry 8310
lackberry 9700
AMSUNG Galaxy
AMSUNG gt-s5628
ony Ericsson W910i
emarks: In theory, it can also support the equipment with Bluetooth music play
eatures besides the above-mentioned mobile phones.
roduct Specification
luetooth specifications: Bluetooth 2. 1+EDR
utput power: Output Level 2, and the longest connecting distance of 10 meters
orking frequency scope: 2. 402GHz -2. 480GHz unlicensed ISM band
8
Loading...