Users’ Manual of BC03
The picture is only provided for reference. Please
refer to the actual unit!
Table of Contents
1. Preface ................................................................. 2
2. Accessories .......................................................... 2
3. Introduction of Product ....................................... 2
4. Precautions .......................................................... 3
5. Introduction of Product Panel.............................. 4
6. Instructions of Operations ................................... 6
7. Report on the Equipment Compatibility ............. 8
8. Main Technical Parameters ................................. 9
9. Guidance on Simple Troubleshooting ............... 10
1
1. Preface
To the users:
Welcome to become the user of Shengtianlong electrical appliance and thanks for
patronage!
Please read this Users’ Manual carefully before use to make full use of the play
functions and know well about the system connection and usage. At the same time,
you will find that you can find your requirements about the product met in the
aspects of design, workmanship and human-based operations, etc.
Please keep this Users’ Manual well for future reference.
Unpacking
Please unpack it carefully and make sure the following accessories are contained in
it; put them well and prevent them from missing.
2. Accessories
□ Player 1 piece
□Users’ Manual 1 piece
□ MICRO USB charge lead 1 piece
□ 3.7V/ 800mA lithium battery 1 piece
3. Introduction of Product
This product is a kind of portable Bluetooth audio system supporting the music play
features, and designed with digital signal processing technique, suitable for the
different occasions like office and home, etc. and it may be connected wirelessly to
most other equipment and cell phones with Bluetooth features to play the music in
them in high quality.
2
4. Precautions
First thanks for buying the digital combination audio produced by this company!
Please refer to this Users’ Manual before use to use it properly.
The contents stated herein may be modified from time to time for better service as
the product properties and functions are changed without prior notice.
For the sound performances of the product, never use it in too cold, too hot, too
dusty or humid places, especially:
1. Moist or underwater conditions
2. Near the heater or hi-temperature services
3. Solarization
4. Places apt to fall
5. Never disassemble the combination audio; otherwise, it may invalidate the
warranty.
Warnings
1.
Please protect the product from water like water drops or splash. Do
not put water containers like vase onto the product to avoid any
unexpected accidents.
2. Please check if the voltage of the power grid is the same with that
specified on the power adapter of this unit.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
3
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
5. Introduction of Product Panel
Definitions of Keypads and Ports:
There are 3 keys, 2 ports and 1 switch defined as below:
: Hands-free microphone
1.
2. －: Press it shortly to volume down and press it for a longer time to
volume down rapidly.
3. +:Press it shortly to volume up and press it for a longer time to volume up
rapidly.
4. □: Long press “□” button for more than 3 seconds to enter into pair status.
Press it shortly in Bluetooth play state to pause or play the music. Press this button
shortly in time of incoming calls to answer the call in hands-free mode;
Press it shortly in hands-free mode to hang up; and press it for a longer time in
time of incoming calls for more than 3 seconds to refuse the calls and press it
shortly twice to dial the phone number called last time.
4
1. OFF/ON: Power switch
2. DC 5V: DC 5V MICRO USB charge with the lithium battery charge hole.
(The hole beside it is the red charge indicator lamp of 3.7 V lithium battery)
3. AUX IN: Input hole for 3.5mm plug to connect the external sound source
LED INDICATOR LAMP:
LED (Blue): The blue LED indicator lamp will flicker during the Bluetooth connection
LED (Red): When AUX IN line is inserted during the Bluetooth connection and
Hands-free microphone:
Remarks: It’s proposed to call within 3 meters away from the product to ensure
the normal hands-free quality!
Charge Mode:
Connect one end of micro USB line supplied together with the product to the
computer and the other end of it to DC 5V hole on the back of the product to charge.
The red LED charge indicator lamp will turn on, and push “OFF/ON” switch on the
back of product to “ON” to start up.
Remarks:
and will keep ON after successful connection and pair.
and pair
play, it will switch over to AUX feature and the red LED indicator lamp
will keep ON.
: It is located at the left top side of the unit, look like a hole.
5
A. When one end of the MICRO USB connecting cable is connected to the
computer in any state and at any time, and the other end is connected to DC 5V
hole on the back of the product, the 3.7 V lithium battery will be charged.
B. When the unit is totally out of power, switch the “OFF/ON” button to “OFF”
then connect USB to charge it.
C. It will take 3 hours for 3.7 V lithium battery supplied together with the product
to charge full and the red LED indicator lamp will turn off when the battery is
charged completely.
D. The power adapter with DC 5V output may be used to normally charge the unit.
6. Instructions of Operations
Startup:
During the use, dial the switch on the back of product to ON to start up and dial it
to off to switch off.
1. During the first use, the blue LED indicator lamp will flicker and the unit will
enter into PAIR mode.
2. If pair was succeeded before, the blue LED indicator lamp will turn on and
flicker slowly and the unit will enter into SEARCH mode and the Bluetooth will be
automatically connected to the equipment and cell phone used last time. The unit
will enter into CONNECTION mode when it is connected successfully and will
enter into Bluetooth Wait mode if not.
Bluetooth Search Mode:
This mode may be entered from two states:
1. Press “□” button for more than 3 seconds in Bluetooth search mode or wait
mode.
2. During startup for the first use:
1). Put the cell phone within 3 meters;
6
2). Press “□” button for more than 3 seconds, the blue lamp will flicker and the unit
will enter into PAIR state;
3). Activate the Bluetooth features of Bluetooth cell phone so that the cell phone
starts to search for the Bluetooth device. Please refer to the users’ manual for
details;
4). Select “P200” from the device found by the cell phone;
5). For some cell phones, the users have to key in the identification code “0000”
and press ENTER key to pair the unit and cell phone and after successful pair,
the blue LED lamp will keep ON.
6). Press RETURN key on the cell phone to exit from the cell phone menu and play
music with the unit when there is no barrier between two cell phones within 10
meters. At this time, you can play music with the unit.
Remarks:
1. This unit will enter into CONNECTION mode after the successfully pair.
2. When the paired device quantity comes to the maximum capacity, i.e., 4, the
unit will automatically clear the first equipment in its memory.
Bluetooth Connection Mode:
After the successful pair, the blue LED indicator lamp will keep ON. When there is
no Bluetooth icon on the cell phone screen, please activate the Bluetooth
connection as per the following steps:
(1) Use the cell phone to select “P200-01” in the cell phone pair list for
connection;
(2) Select “Accept the connection” on the cell phone screen.
(3) To disconnect, please press “□” button for a longer time or disconnect from the
cell phone, enter into Bluetooth wait mode.
In the Bluetooth music play mode:
Press “+ －” button shortly to or press it for a longer time to adjust the volume.
Press “□” button shortly to pause/ play.
7
Hands-free Answer:
When there is incoming call during music play mode, the unit speaker will ring and
press “□” button shortly to answer the call.
Hang-up
Press “□” button shortly during in hands-free call status to hang up and return to the
music play mode.
Refuse calls:
Press “□” button for more than 3 seconds at time of incoming call to refuse the call.
Call-back:
Press “□” button twice during the Bluetooth music play state to dial back the
phone call made last time.
AUX Function:
When AUX line is inserted into the AUX IN hole, the system will automatically
pause the Bluetooth feature, the blue LED indicator lamp will turn off ( the red
LED indicator lamp will keep ON), the unit will access to AUX IN mode, then the
user can press “+－” button shortly to press it for a longer time to adjust the
volume.
When AUX line is disconnected from the AUX IN hole, the unit will automatically
enter into Bluetooth mode.
7. Report on the Equipment Compatibility
iPad 1
iPad 2
iPad 3
iPhone 4
iPhone 4S
8
iPhone 3G
iPhone 3GS
NOKIA N95
NOKIA N78
Android OS
NOKIA 5800
NOKIA 6110
NOKIA 5300
NOKIA 6230
Blackberry 8310
Blackberry 9700
SAMSUNG Galaxy
SAMSUNG gt-s5628
Sony Ericsson W910i
Remarks: Besides the cell phones and equipment mentioned above, the product
also supports all cell phones and equipment with Bluetooth features to play music
in theory!
8. Main Technical Parameters
Bluetooth specifications: BluetoothV3.0+EDR
Output power: Output Level 2, maximum connection distance of 10 meters
Maximum output power: L: 3W + R:3W
Rated output power: L: 2W + R:2W
Operating frequency range: 2.402GHz- 2.480GHz
Profiles supported: AVRCP1.0 GAVDP1.0 AVDPT1.0 A2DP1.0
Hands-Free Profile1.5 and Headset Profile V1.1
Speaker impedance:
Product dimensions: 130× 78×65 (mm) (L x W x H)
Product weight: Approximately 0.271KG (host)
The product design and specifications may be changed without prior notice!
L and R: 4Ω (Ohm）
9
9. Guidance on Simple Troubleshooting
Failure Resolutions
Bluetooth pair
and connection
fail
The indicator
lamp does not
turn on and the
Bluetooth unit
is not available
Low Bluetooth
volume
Short Bluetooth
connection
distance
Bluetooth may
be normally
connected and
played, but
sometimes, there
is interrupted
No voice after
Bluetooth is
connected
Other cell phone or equipment has been connected before
connection, and has not left yet and Bluetooth cannot be switched
off. When connection feature is employed again, the Bluetooth
unit will automatically search for this Bluetooth equipment for
connection. First turn off the Bluetooth feature of Bluetooth
equipment and the next Bluetooth equipment can search, pair and
connect normally.
Bluetooth unit has not operated for a long time, and may come
into dormant state, then press the PAIR/ Play button on the unit
for a longer time to rouse it.
1. After the cell phone and Bluetooth unit are connected, the
Bluetooth unit volume is not put at the maximum level, and in
level output as default, please tune up the cell phone output
volume. 2. Bluetooth unit has low output volume.
There is a barrier between the cell phone and Bluetooth, please
clear it away.
1. There is a barrier between the cell phone and Bluetooth, please
clear it away.
2. The distance between the Bluetooth unit and connected cell
phone is too far away, out of normal connection range. Please
put them nearer.
The audio feature of Bluetooth unit is not activated after the
Bluetooth unit is connected to the cell phone, please turn on the
output volume of cell phone.
10
Bluetooth
cannot be
connected to
other several cell
phones and
equipment
Remarks: When the machine cannot work normally when the above-mentioned
troubleshooting instructions are followed, please go to the technical professionals
or after-sales servicemen for help!
Bluetooth unit has been connected to the current cell phone; to
pair with and connect to the next cell phone, please press the
PAIR button on the unit for a longer time to disconnect the last
cell phone and click “CONNECT” after the next cell phone has
searched the Bluetooth pair name.
11
Loading...