Page 1
Wall Mounted Touch Panel
Model No.: T11-1,T12-1,T13-1,T14-1, T15-1
4 Zone/1-5 color/Glass touch panel/Color slide/AC input/DMX 512 and RF 2.4G signal output
T11-1
T12-1
T14-1T13-1
T15-1
Features
● Touch panel 4 zone 1-5 color DMX512 master, can also be used as 4 zone 1-5 color RF remote.
● DMX signal output, comply to standard DMX512 protocol, compatible with DMX decoder from any supplier.
● When used as RF remote, each zone can remote control multiple Skydance’s 2.4G LED controllers.
● Ultra sensitive high strength glass touch panel with touch color slide in the middle and backlighting.
● Smooth and accurate color adjustment by touching the color slide.
● Touch keys with chord tones and LED indicator.
Technical Parameters
Model No.
Light type
Output DMX channel number
T11-1
Single color
4
T12-1
Dual color
8
T13-1
RGB
12
T14-1
RGBW
16
RGB+CCT
LVD RED
T15-1
20
Input and Output
Input voltage
Input current
Output signal
85-265VAC
Max 0.1A
DMX512, RF 2.4GHz
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Safety standard(LVD)
Radio Equipment(RED)
Certification
EN60950
EN300 328
CE,EMC,LVD,RED
Warranty
Warranty
User Manual Ver 1.0.4
5 years
Dimming data
Input signal
RF Control distance
Dimming level
Dimming range
Environment
Operation temperature
Case temperature (Max.)
IP rating
www.iskydance.com
Touch key + RF 2.4GHz
30m
256 levels
0 -100%
Ta: -30OC ~ +55OC
O
+85
T c:
C
IP20
Page 1
Page 2
Mechanical Structures and Installations
T11-1,T12-1,T13-1,T14-1, T15-1 Wall Mounted Touch Panel
T11-1/ T12-1/T13-1
T14-1 / T15-1
DMX output +
DMX OU TPUT
D+ D-
DMX output -
DMX signal GND
Installation diagram:
86mm
LN
AC input L
AC input N
86mm
6
45.5mm
2mm
INPU T
85-2 65VAC
GND
59mm
11. 5mm
35mm
Typical base as below:
Uninstall
Touch panel Baseplate
Key function
T11-1 Single color panel
Zone
Zone
Zone
Zone
T12-1 Dual color panel
Zone
Power
Scene
Scene
Scene
Power
European style
86 size
Powe r
Base
Turn on/off all zone light.
Brightness slide.
Scen e Scen e Sce ne
Zone
Zone
Zone
Short press recall scene. Long press 2s to save the current state into 1/2/3.
Zone
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
Powe r
Turn on/off all zone light.
Color temperature / Brightness slide.
Zone
Zone
Zone
User Manual Ver 1.0.4
Switc h
Scene
Scene
Swit ch
Scen e Scen e
Zone
Switch between color temperature / brightness slide
Short press recall scene. Long press 2s to save the current state into 1/2.
Zone
Zone
Zone
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
www.iskydance.com
Page 2
Page 3
T13-1 RGB panel
T11-1,T12-1,T13-1,T14-1, T15-1 Wall Mounted Touch Panel
Zone
Zone
Zone
Zone
T14-1 RGBW panel
Zone
Zone
Zone
Zone
Power
Mode
Speed
Brigh t
Power
Mode
Brt/S peed
W
Whit e
Powe r
Turn on/off all zone light.
Color slide.
Mode
Spee d
Brig ht
Zone
Short press play 10 built-in mode, long press 2s run mode-cycle.
Adjust dynamic mode speed or RGB color saturation, 10 levels.
Adjust brightness, 10 levels.
Zone
Zone
Zone
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
Powe r
Turn on/off all zone light.
Color slide.
Mode
Brt/ Speed
W
Whit e
Zone
Short press play 10 built-in mode, long press 2s run mode-cycle.
Adjust dynamic mode speed or static color brightness,10 levels.
Short press turn on/off W channel, long press adjust W channel brightness.
Zone
Zone
Zone
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
T15-1 RGB+CCT panel
1
ZONE
ZONE
ZONE
ZONE
POWER
2
3
4
M
MODE
BRT/S PEED
SWITC H
Powe r
SWIT CH
Mode
Brt/ Speed
Zone
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
Note: After touch power key to turn off light, long press power key for 5 seconds will turn on or tur n off tone.
User Manual Ver 1.0.4
Turn on/off all zone light.
RGB color / Color temperature slide.
Switch between RGB color / Color temperature slide.
Short press play 10 built-in mode, long press 2s run mode-cycle.
Adjust dynamic mode speed or static color brightness,10 levels.
Zone
Zone
Zone
www.iskydance.com
Page 3
Page 4
T11-1,T12-1,T13-1,T14-1, T15-1 Wall Mounted Touch Panel
Touch Panel work as DMX512 Master
After connect with DMX decoders, please set the DMX decoders address as below:
Model No.
Zone 1 DMX decoder’s address
Zone 2 DMX decoder’s address
Zone 3 DMX decoder’s address
Zone 4 DMX decoder’s address
T11-1
1
2
3
4
T12-1
WW CW
1 2
3 4 4 5 6
5 6 7 8 9 9 10 11 12
7 8 10 11 12
T13-1
R G B
1 2 3
T14-1
R G B W
1 2 3 4
5 6 7 8
13 14 15 16
Wiring Diagram for touch panel work as DMX512 master
For T14-1 RGBW panel
Each zone 4 channel:
zone 1 is channel 1 ~ 4,
zone 2 is channel 5 ~ 8,
zone 3 is channel 9 ~ 12,
zone 4 is channel 13 ~ 16,
channel 1,5,9,13 is R,
channel 2,6,10,14 is G,
channel 3,7,11,15 is B,
channel 4,8,12,16 is W.
DMX OUT PUT
D+ D-
T14-1
GND
INPUT
85-26 5VAC
LN
T15-1
R G B WW CW
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
AC85-265V
D+ D- D-D+
D4-L
DMX512 & RDM Decoder
Power Supply
12-24VDC
Constant Voltage
CWCW
AC100-240V
+
R
G
RGBW LED strip
B
W
DMX signal
User Manual Ver 1.0.4
www.iskydance.com
Page 4
Page 5
T11-1,T12-1,T13-1,T14-1, T15-1 Wall Mounted Touch Panel
Touch Panel work as RF remote (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press match key, immediately press Zone
key of the touch panel.
Use Power Restart
Match:
Switch off the power of the receiver, then switch on power again,
immediately short press Zone key 3 times on the touch panel.
The light blinks 3 times means match is successful.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
Delete:
.
Switch off the power of the receiver, then switch on power again,
immediately short press Zone key 5 times on the touch panel.
The light blinks 5 times means all matched remotes were deleted.
Wiring Diagram for touch panel work as RF remote
T11-1/ T12-1/T13-1
T14-1 / T15-1
DMX OUT PUT
INPUT
85-26 5VAC
GNDD+ D-
LN
AC85-265V
Malfunctions analysis & troubleshooting
Malfunctions
No light
Wrong color
1. No power.
2. Wrong connection or insecure.
1. DMX decoder first address error.
2. Wrong connection of output wires.
Causes
Troubleshooting
1. Check the power.
2. Check the connection.
1. Check the DMX first address.
2. Reconnect output wires.
User Manual Ver 1.0.4
www.iskydance.com
Page 5
Loading...