SKUTCH BA-1000 Operation Manual
209 Kenroy Lane, Suite 9
Roseville, California 95678
916-786-6186
http://www.skutchelectronics.com
BA-1000-A
VBOX mode
Operation Manual
Version 6.XX
NOTE: This manual is designed for operating the system with the factory
default settings and the most common operating modes; for more detailed
information, you can view the PDF version of the Technical Reference
Manual from our websit at http://www.skutchelectronics.com/manuals.htm
Phone Connection
13 (See
Installation
Save Your Packing
You MUST save ALL packing material supplied with this
unit. If the system must be sent in for any reason and you do not
use the supplied packing material, you WILL be charged for the
replacement of this material. This packing material has been
designed to give the system maximum protection during the
shipping process.
While every precaution has been taken in preparation of
this OPERATION MANUAL, the manufacturer does not
assume any liability for errors or omissions. The manufacturer
reserves the right to make changes in the specifications of this
unit at any time without notice.
Location
When selecting a location for the system, the following
conditions MUST be avoided:
Temperatures above 95°F.
Temperatures below 65°F.
Carpeted areas that produce Static Electricity.
High dust/tobacco smoke areas.
Exposure to direct sunlight.
The SYSTEM and the POWER CUBE should be located
in a well ventilated area.
The system's telephone line requirements are the same as a
standard telephone. Its connection to the telephone line is the
same as any NORMAL single line telephone that you could buy
at any department store.
Business Telephones
This system is not compatible with modular jacks used for
multi-line ELECTRONIC PHONE SYSTEMS. To connect the
SYSTEM to this type of phone system, an RJ-11 jack must be
ordered from your local telephone company. It should be noted
that when the BA-1000-A is used, the line indicator lights on the
phone system will not show the line as being used.
Single Line Phones
If you have a single line phone it is probably connected to
a small modular jack. Simply unplug the phone and plug the
system in. If you wish to have both the phone and the system
connected at the same time you can plug the phone into the
PHONE jack on the back of the BA-1000-A.
Order A Phone Jack
If you need to order a jack from the telephone company,
you will need the following information:
FCC No: AP494N-64812-MA-E
RINGER EQ.:0.0B
USOC No (Jack type) RJ-11, RJ-12, or RJ-
telephone connection)
Power
The SYSTEM can be used on a three-prong grounded
110VAC power outlet. This is needed for proper protection of
the unit's circuitry. Power circuits that are used for any heavy
equipment such as large freezers, blowers, heaters, copiers, or
any electrical equipment that contains large motors, should be
avoided. Heavy electrical equipment can cause power glitches
over the power line which could interfere with the operation of
the system. If your power lines are excessively noisy a power
filter MIGHT solve the problem.
Power Fail Friendly
If the power fails, the BA-1000-A will remember its exact
mode. So, when power is restored, the BA-1000-A will resume
where it left off; whether dialing or waiting for calls to come in.
Version 6.XX Page 2
Operation
Wait 5 seconds.
Press:
1111
.
Enter the day of the week, then
Sunday,
2222
= Monday, etc.
####
; example:
1111
=
Voice Mail mode makes the BA-1000-A work as a true
Voice Mail system with 16 boxes and 8 urgent alert phone
numbers per box. Each box has a unique PIN so you can:
remotely listen to the messages left by the callers, remotely
program the mail box messages and phone numbers.
In the Voice Mail mode, each caller will be greeted with
an initial Main Greeting Message (that you record) and they
will be able to choose which mail box they want to go to. If the
caller doesn’t choose a mail box, the system will automatically
send them to the default mail box. After visiting a mail box, the
caller will return to the Main Greeting Message where they can
either go to another mail box or hang up. If the caller triggers
the system for an urgent call, he will be told to hang up, then the
system will call you to deliver his urgent message.
* * *
Connect it and Power Up
Connect our phone cord from the unit, the jack labeled
LINE, to your phone line jack on the wall. It will only work on
a standard phone line, like your house phone line or a jack your
FAX machine plugs in to.
Insert the CF Card into the back of the unit; the system
MUST have the CF Card in the unit at all times to operate.
Connect the supplied POWER ADAPTER to the
POWER jack on the rear panel of the BA-1000-A. This
MUST be done before the POWER ADAPTER is connected
to 115VAC power.
Now plug the POWER ADAPTER to a 115VAC 60Hz
power outlet.
* * *
Change the Time
To change the current time and/or date, do the following:
Press:
~
Wait 5 seconds.
Enter:
8 8 8
8 8 8
8 8 88 8 8
~
~~
.
Enter the new date then
Enter the current time then
and p.m. with the
Wait 5 seconds then press
****
####
.
####
; you change between a.m.
. Example: 1:32 is
~
~
~~
0132 #
0132 #
0132 #0132 #
.
.
* * *
ONE TIME Set up to turn on
Voice Mail Box mode
NOTE: This is a ONE TIME operation. To set up for
Voice Mail mode, do the following:
Press:
~
~
~~
Wait 5 seconds.
Enter the Setup mode with:
8
8 8 8
8 8
8 8
8 88 8
Wait 5 seconds.
Enter the hidden Setup features with:
# # # # # # #
# # # # # # #
# # # # # # ## # # # # # #
* * * * #
* * * * #
* * * * #* * * * #
Go to the Vbox Flag option with:
# # # # # # # # #
# # # # # # # # #
# # # # # # # # ## # # # # # # # #
# # # # # # # # #
# # # # # # # # #
# # # # # # # # ## # # # # # # # #
Now turn the flag on and return to the Idle state with:
1 # ~
1 # ~
1 # ~1 # ~
.
* * *
Change a Voice Mail box PIN
The Voice Mail box PIN is how each mail box user will
access their messages and record a new outgoing message. The
following steps let you review/change the PINs for the Voice
Mail boxes:
Press:
~
~
~~
Wait 5 seconds.
Enter the Setup mode with:
8 8 8
8 8 8
8 8 88 8 8
Wait 5 seconds.
.
Version 6.XX Page 3
Loading...