User manual
Model no：2035135 Rating: 5V 200MA
Main Unite:
• this section include the photo of the product and the overview of the main unit
• A: Power on/Power off
Also refer to MFB (Skull Button) below mentioned
• B: Volume+
Increase volume and track forward
• C: Volume-
Decrease volume and track backward
To Enterrrr Pairing Mode:
• Make sure the Giro Device is in OFF mode
• Long Press MFB (Skull Button)(refer to A point) for 5 seconds
• While in pairing mode, the LED will alternate flashing Blue/Red
In STANDBY mode , Blue LED will fast flash two times every 3 secs.
To Power On:
• Make sure Giro is in OFF mode
• Long Press MFB (Skull Button) (refer to A point) for 3 seconds
• While Power On, the LED will flash Blue
• Giro will search and AUTO connect with previous paired phone for 3 seconds
• If previous phone is not available, it will enter STANDBY mode
• Can MANUALLY connect previous phone in STANDBY mode by phone operation
• Please note cannot pair a NEW phone in STANDBY mode
• To pair a NEW phone that has never been paired before, need to start Pairing Mode process
To Power Off:
• While Giro is in “Power ON” or “STANDBY” mode
• Long Press MFB (Skull Button) (refer to A point) for 3 seconds
• If in STANDBY mode for 30 mins, Giro Device will automatically Power off
To Answer Phone Call, Play/Pause Music:
• Short Press MFB (Skull Button) (refer to A point)
• Music will resume after hanging up call
Volume Up:
• Short Press Volume Up Button (+)
• Will have audible tone sound when Max volume is reached
• 15 steps of volume control up
Volume Down:
• Short Press Volume Down Button (-)
• Will have audible tone sound (mute) when Min volume is reached
• 15 steps of volume control down
Track Forward:
• Long Press Volume Up Button (+)
Track Backward:
• Long Press Volume Down Button (-)
Loading...