SK Telesys SMR AI250 User Manual

총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 01- 28 20:39 / 이 문서는 보안문서로서 외부 반출을 금합니다.

SMR-AI250

User Manual

SK telesys

SKTSP-CP-06-03

A4(210X297)

총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 01- 28 20:39 / 이 문서는 보안문서로서 외부 반출을 금합니다.

SMR-AI250

Contents

1 INTRODUCTION ..................................................................................................... 4

1.1 FCC compliance ........................................................................................................................ 4

1.2 Important safety information ............................................................................................... 5

1.2.1 Caution ............................................................................................................................... 5

1.2.2 Warning ............................................................................................................................. 5

1.3 Physical and Environment ..................................................................................................... 7

2 SMR-AI250 FEATURES........................................................................................... 8

2.1 Product Configuration ............................................................................................................ 8

2.1.1 Features ............................................................................................................................. 8

2.1.2 Configuration .................................................................................................................... 8

2.2 Indicator and operating elements...................................................................................... 10

3 INSTALLATION GUIDE ......................................................................................... 11

3.1 Pre-confirmation .................................................................................................................... 11

3.2 Unpack the SMR-AI250 and Components check ............................................................ 11

3.3 Choose the best location ..................................................................................................... 13

3.4 The Wall-Mount-Bracket Installation ................................................................................. 13

3.5 The SMR-AI250 Mounting ................................................................................................... 14

3.6 Power on the SMR-AI250 .................................................................................................... 16

4 MAINTENANCE .................................................................................................... 17

4.1 Diagnostic for LED ................................................................................................................ 17

4.1.1 Power LED ....................................................................................................................... 18

4.1.2 RUN LED .......................................................................................................................... 18

4.1.3 Status LED ....................................................................................................................... 19

5 SUPPLEMENT DOCUMENT ................................................................................ 20

5.1 Technical Specification ......................................................................................................... 20

5.2 Dimensions ............................................................................................................................. 21

5.3 ID Switch ................................................................................................................................. 22

총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 01- 28 20:39 / 이 문서는 보안문서로서 외부 반출을 금합니다.

SMR-AI250

Figures

Figure 1. SMR-AI250 Block diagram ..................................................................................... 9

Figure 2. Top side of the SMR-AI250 ................................................................................... 10

Figure 4. The Wall-Mount-Bracket installation .................................................................. 14

Figure 5. Omni Antenna assembling ..................................................................................... 14

Figure 6. The SMR-AI250 Mounting .................................................................................... 15

Figure 7. Front View of the SMR-AI250 .............................................................................. 17

Figure 8. Dimensions of the SMR-AI250 .............................................................................. 21

Figure 9. The SMR-AI250 ID Switch .................................................................................... 23

Tables

Table 1. Physical Specification................................................................................................. 7

Table 2. Element List .............................................................................................................. 12

Table 3. Power LED ................................................................................................................ 18

Table 4. Run LED ................................................................................................................... 18

Table 5. Status LED ................................................................................................................ 19

Table 6. The SMR-AI250 Specification ................................................................................ 20

Table 7. The SMR-AI250 ID setting ...................................................................................... 22

Table 8. Digit Value of ID Switch .......................................................................................... 23

총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 01- 28 20:39 / 이 문서는 보안문서로서 외부 반출을 금합니다.

SMR-AI250

1 Introduction

is operating instructions manual provides all the information you need for

connection, setup and installation as well as important instructions for operation and

maintenance. Please read this information before putting the SMR-AI250 into

installation and operation and keep this operating instruction manual accessible in the

immediate vicinity of the product.

SMR-AI250

networks areas that support multiple antennas to minimize building penetration loss. It

also helps service carriers install or expand Mobile WiMAX Coverage more easily and

cost-effectively. This product requires a wire connection using UTP cable to connect

with the core network and an indoor or outdoor antenna for the air interface.

is to cover large building, campuses, hotel, hospital and enterprise

1.1 FCC compliance

SMR-AI250

harmful interference and must accept any interference received, including interference

that may cause undesired operation.

is equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

is complies with Part 15 of the FCC Rules. This device may not cause

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the users will be required to correct the interference at their own

expense.

anges or modifications not expressly approved by the party responsible for

총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 01- 28 20:39 / 이 문서는 보안문서로서 외부 반출을 금합니다.

SMR-AI250

compliance could void the user’s authority to operate the equipment. Receivers

associated with the operation of a licensed radio service, e.g., FM broadcast under

part 73 of this chapter, land mobile operation under part 90, etc., shall bear the

following statement in a conspicuous location on the device:

1.2 Important safety information

1.2.1 C

ile this device is in operation, a separation distance of at least 20 centimeters

(8 inches) must be maintained between the radiating antenna and any person

exposed to the transmitter in order to meet the FCC RF exposure guidelines. No

change to the antenna or device is permitted.

Doing so may result in the installed system exceeding RF exposure requirements.

This device must not be co-located or operating in conjunction with any other antenna

or radio transmitter. Installers and end users must follow the installation instructions

provided in this guide.

1.2.2 W

Do not use the product in a dusty or humid environment

It may cause a short circuit or a build up heat, resu

aution

arning

lt in fire or electric shock.

Protect against static electricity

An electrostatic discharge may damage components of this product. Do not directly

touch any of the connector or component surfaces

Static electricity can be generated on clothing and people. Before handling the

product, please discharge static electricity from your body by touching a ground or

grounded metal surface.

Do not operate at other than the specified voltage

총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 01- 28 20:39 / 이 문서는 보안문서로서 외부 반출을 금합니다.

SMR-AI250

Do not operate at other than the specified voltage of AC 100V ~ 240V. Operation at

other than the rated voltage may result in fire or out of order.

Do not operate with other than the specified power supply

Do not operate with other than the specified AC adapter that may result in fire or

malfunction.

Handle the AC adapter cord carefully

Do not place it near hot objects or heavy objects on

top of the AC adapter cord which

may be damaged result in fire or electrical shock. Not exact altering the cord,

excessively bending or pulling the cord may result in fire or electricity shock.

Do not let foreign matters enter the inside of the product

When water or any foreign matter enters the inside o

f the product, it may cause fire or

electrical shock. In the case rapidly turn off the power switch and pull out the power

cable from the receptacle

Do not disassemble

Do not remove the cover or modify. For hope internal inspection or repair. Please

contact your system integrator directly.

Do not use the product in a damaged condition

Do not drop the product and use the product with its cover, antenna and AC adapter

broken. It may result in fire or malfunction of this product. In case the product is

damaged, turn off the power of the product and pull out the power cable from the

receptacle.

Do not touch AC adapter with wet hands

Do not disconnect or plug in AC adapter when your hands are wet. Contact with

water may result in fire, damage or electric shock.

총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 01- 28 20:39 / 이 문서는 보안문서로서 외부 반출을 금합니다.

SMR-AI250

Do not setup in area that becomes hot

Do not setup in an area exposed to near a heating ap

paratus or like as direct sunlight

outdoor side. The heat can accumulate, causing burns, fire or damage. Also, this

product may become deformed exterior or change color

Do not place the product on an unstable place

Do not place the product on an unstable table or slanted or slippery surface. The

product may fall from it, resulting in injuries or malfunction of the product.

1.3 Physical and Environment

Table 1. Physical Specification

Item Description

Temperature

Humidity

Weight Under 0kg

Operating 0°C ~50°C

Storage -10°C ~60°C

Operating 20%~80%

Storage 10%~85%

Antenna SMA

Power

PoE(Power-over-Ethernet) or

5.3 V AC/DC Adaptor

총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 01- 28 20:39 / 이 문서는 보안문서로서 외부 반출을 금합니다.

+ 16 hidden pages

SK Telesys SMR AI250 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual