MOUNTING INSTRUCTION EDGE AL ¬ 11494
PARTS
TO ITEM 1.
VARIOUS PARTS FOR
STAY FITTING
TO ITEM 2.+3.+4.
VARIOUS PARTS FOR
FITTING TO THE FRAME
SPACERS FOR FITTING ON
FORKS
WITH DISC BRAKES
ALLROAD
ROAD
MOUNTAIN
SCHIEBEBRÜCKE
SLIDINGBRIDGE
1. STAY-ASSEMBLING FRONT + REAR
1 Nm
ATTENTION!
KEEP THE MINIMUM DISTANCE
OF 15 MM BETWEEN FENDER
AND TYRE.
1.
2.
2. FRAME MOUNTING FRONT
2.1 BRAKE-FITTING FRONT
2.1
2.2
1 Nm
2.2 STAY ATTACHMENT FRONT INCL. LENGTHS ADJUSTMENTS OF THE STAYS
2.
EN. EDGE AL
Solid aluminium mudguards in clean look, with rounded edges.
Long mudguard profiles ensure maximum protection against splashes.
MADE IN GERMANY SKS-GERMANY.COM
3.
1.
1 Nm
GERMANY
MOUNTING INSTRUCTION EDGE AL ¬ 11494
3. FRAME MOUNTING REAR
3.1 REMOVE THE REAR WHEEL
3.2 ASSEMBLING OF SLIDING BRIDGE 90° DEGREE ANGLE
5. REMOUNT THE REAR WHEEL
ALLROAD
ROAD
MOUNTAIN
3.2.1 SCREW THE SLIDING BRIDGE
3.3 ASSEMBLING OF SLIDING BRIDGE 0° DEGREE ANGLE
3.3.1 SCREW THE SLIDING BRIDGE
3.2.2 CLIP THE FENDER ON THE SLIDING BRIDGE
3.3.2 CLIP THE FENDER ON THE SLIDING BRIDGE
6. REAR STAY ASSEMBLING
6.1 STAY ATTACHMENT REAR INCL. LENGTHS ADJUSTMENTS OF THE STAYS
2.
3.
1 Nm
6.1
1.
4. ASSEMBLING AT THE BOTTOM BRACKET
PROFILE WIDTH TYRES LENGTH FRONT LENGTH REARPART NO.
ATTENTION! MOUNTING OF SPACERS FOR FRAMES WITH DISC BRAKES
*
* SCREW IS NOT INCLUDED IN
THE SCOPE OF DELIVERY
700 x 28c - 40c1149446 mm 740 mm 1200 mm
MADE IN GERMANY SKS-GERMANY.COM
GERMANY
Loading...