Skrydstrup R&D MR10 Owner's Manual
Owner’s Manual
MR10 Loop System
S
SKRYDSTRUP R&D
because performance maƩ ers
Congratula ons on your purchase of the SKRYDSTRUP R&D MR10 Loop System.
The MR10 Loop System was designed to provide ul mate fl exibility in signal rou ng, combined with the best audio performance possible.
The MR10 Loop System u lizes a unique unity-gain buff er circuit in every audio loop, designed by SKRYDSTRUP R&D, to maintain correct impedances
throughout the en re system and to avoid the cross-loading aff ect between stomp boxes / eff ect units. Furthermore, each input/send/return/output
features our unique RFI protec on.
This manual will introduce you to the MR10 Loop System and its features. A er reading this manual please keep it for future reference.
We are confi dent that you very quickly will be familiar with the MR10 Loop System, and appreciate the versa lity and high quality of this unit.
INTRODUCTION
WARRANTY
- All parts and workmanship of this product are fully guaranteed to be free of defects under normal use and service, for a period of two (2)
years from date of purchase.
- This warranty will remain in eff ect un l the original expira on date.
- Any damage resul ng from mis-use or failure to follow instruc ons and precau ons as stated in this manual, will void this warranty.
Altering this product in general, will void this warranty.
- Should this product require repair, SKRYDSTRUP R&D will assume responsibility for repair service.
Re-pack the unit, along with a descrip on of the problem, and send it to SKRYDSTRUP R&D.
- SKRYDSTRUP R&D reserves the right to make changes in design and/or improvements upon this product, without any obliga on to include
those changes in any products previously manufactured.
PRECAUTIONS
DO NOT a empt to service this unit. Doing so will void this warranty.
DO NOT remove the cover from this unit at any me. Doing so will void this warranty.
DO NOT plug the output from a Power Amplifi er directly into any of the in- or outputs of this unit. Doing so may result in damage to the unit.
This unit is designed to handle instrument and line level signals only.
DO NOT expose this unit to excessive heat. This unit is designed to operate between 0C and 40C.
DO NOT use this unit near water. Care should be taken so that objects do not fall and liquids are not spilled into the unit through any openings.
DO NOT use solvents such as benzine etc., to clean the exterior. Use a dry so cloth to remove dust, dirt and fi nger marks.
Loading...