SKP Pro Audio USD-6010 User Manual
USD-6010
USD-6010
USER MANUAL
USB TABLETOP PROFESSIONAL PLAYER
SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacture’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that prod
uce heat.
9. Do not defeat the safety purpose of the polarized plug. The wide blade is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Serving is required when the apparatus has been damaged in
any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
15. Where a mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
16. Please keep the unit in a good environment.
17. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids
, such as vases, shall
be placed on the apparatus.
WARNING
To reduce the risk of the fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus
shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.
CAUTION: To reduce the risk of electric shock, do not remove any
cover. No user-serviceable parts inside. Refer servicing to qualified
service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to
the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
CAUTION
To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless
the blades can be fully inserted to prevent blade exposure.
DO NO T OPE N
RIS K OF E LEC TRIC SH OCK
CAUT IO N
1
FEATURES
AC Cord
USB Cable
RCA Cable
Auto Start Cable
Plays MP3/WAV*files from USB
Mp3 Track Listings
Headphone Jack w/Trim Control
Fine Tune BPM
Next Track Search
Auto cue
Real Time Scratch Play
1/75th second frame search
Reverse Play
Real time cue (“Cue on the Fly”)
8 different speed scan (4 Forward/4 Reverse)
Pitch display
RCA coaxial output
Large bright VFD display
Fader Start Control
Seamless Loop (uninterrupted loop playback)
Sampler (For
ward & Reverse Sampling)
Music Master tempo
Sleep Mode
Relay Playback
Memory Backup, Defaults to last setting
Jog Wheel Pitch Bend +/-100%
Selectable Single or Continuous Play
Jog Wheel Sensitivity Adjustment
Folder Search for Mp3's
4 Programmable Cue (Bank) Buttons
Adjustable Pitch Percentages: +/-6%, +/-10%,
+/-16% or +/-100%
Instant Start within 10ms (sound is produced
immediately when the PLAY button is pressed)
* WAV
Files: 1411kbps PCM
2
ACCESSORIES
UDJ-1000 Instruction Manual Page
3
GENERAL FUNCTIONS AND CONTROLS
GENERAL FUNCTIONS AND CONTROLS (Cont.)
UDJ-1000 Instruction Manual Page 4
1. USB PORT - This is the USB port where you insert your USB mass storage device.
2. SOURCE SELECT - Use this button to select USB1/USB2/MIDI music. Hold the SOURCE SELECT button for 2
sec. enter MIDI mode.
3. BRAKE, START DIAL
BRAKE DIAL
-
a. When in the VINYL mode, this BRAKE dial determines the deceleration speed until play stops when the jog
wheel is hold down.
b. When in the CDJ mode, this BRAKE dial determines the deceleration speed until play stops when the
PLAY/PAUSE button is pressed.
c. When the BRAKE dial is rotated to MIN, play stops quickly; when the dial is rotated to MAX, play stops more
slowly before coming to a complete stop.
START DIAL
-
a. When in the VINYL mode, this START dial determines the acceleration speed until full playback speed is
reached when the jog dial is backspin.
b. When in the CDJ mode, this START dial determines the acceleration speed until full playback speed is
reached when the PLAY/PAUSE button is pressed.
c. When the START dial is rotated to MIN, play starts quickly; when the dial is rotated to MAX, play starts more
slowly before full playback.
4. TEMPO RANGE BUTTON - Press the button to choose any pitch percentage of 6%, 10%, 16%, and 100%.
With this button you can also switch Pitch Slider on/off, by pressing it for at least 1 sec.
5. KEY LOCK - This button activates the KEY LOCK function. This function allows you to use the PITCH SLIDER
to speed up or slow down playback speed without altering the tonal pitch of the track.
6. TOGGLE BUTTON (WHEEL MODE) - Each press the TOGGLE button to select the WHEEL MODE of
VINYL/CDJ/A CUE SCRATCH.
a. VINYL - When wheel mode is set to VINYL, use the JOG WHEEL to activate the scratch effect by touching
the surface of Jog Wheel.
b. CDJ - When wheel mode is set to CDJ, scratch mode is exit, JOG WHEEL can be used to pitch bend and
frame search.
c. A.CUE SCRATCH
IN PLAYBACK MODE
While in play mode and when the touch sensitivity function is active, the JOG WHEEL can be used to return
the unit to last IN point.
Simply touch the JOG WHEEL and unit will immediately return to the last set CUE point (BANK LED is not
blinking) or BANK IN point (LED is blinking) and playback without music interruption.
IN CUE MODE
While in cue mode and when the touch sensitivity function is active, tapping on the JOG WHEEL can be used
to start playback.
The unit will continue to playback until the JOG WHEEL is released. Once the JOG WHEEL is released the
unit will return to the last IN point.
7. PITCH SLIDER - This slider is used to adjust the playback pitch percentage. The slider is a set adjustment and
will remain set until the pitch slider is move or the pitch function has been turned off.
GENERAL FUNCTIONS AND CONTROLS (Cont.)
UDJ-1000 Instruction Manual Page 5
8. JOG WHEEL
a The jog wheel will act as a frame search control when the track in the pause or cue mode, allowing
you to set a point.
b The wheel also works as a pitch bend during playback. Turning the wheel clockwise will increase the
pitch percentage up to 100%, and turning the wheel counterclockwise will decrease the pitch
percentage down to -100%. The pitch bend will be determined on how long you turn the jog wheel
continuously.
c The jog wheel can be used with the hold of the TIME and RATIO knob to set effects and samples
parameter adjustment.
There are several varied modes can be adjusted for Jog Wheel light ring.
1. To select light ring you desired; press PRESET button to enter internal menu, and turn FOLDER knob
to search “JOG MODE” menu.
2. Turn the TRACK knob to select the MODEs you want to adjust.
3. Press SHIFT button and turn TRACK knob to adjust the setting value.
1) MODE 1 - It will show the playing point indicator around the ring. You can adjust the setting
value range 1 of smallest indicator to 23 of full circle indicator.
2) MODE 2 - It will indicate the playing point opposite (on->off / offon) when the Jog Wheel is
touched. You can adjust the setting value range 1 of smallest indicator off to 23 of full circle off.
3) MODE 3 - It will show the playing point indicator around the ring and flash to the playing level in
both sides. You can adjust the setting value range 1 of smallest playing point indicator to 23 of
full circle indicator.
4) MODE 4 - It will flash to the playing level around the ring.
5) MODE 5 - It will always on. You can adjust the setting brightness range 1 to 100.
6) MODE 6 - It will flash related to the setting speed. You can adjust the setting speed range 1 of
fast flash to 100 of slow flash.
7) MODE 7 - It will show the playing point similar to trail effect.
8) MODE 8 - It will light when the Jog Wheel is touched.
9. TAP BUTTON - This button is used for manual BPM. When in manual BPM mode, tap this button to the beat of
the current track. Hold the TAP button for 1 sec. to activate Auto BPM.
10. PITCH BEND BUTTONS - The desired pitch of music decrease or increase when button is pressing and
returns to the original pitch when the button is released.
11. SAMPLE BUTTON -
a Press this button, then press the desired BANK button to set the sample loop mode (LED is on).
b When sample mode is set, then sampler will mix the music together.
c And press the SAMPLE button again to set the sample single mode (LED is flash).
d Press the SAMPLE button again to cancel sample function.
12. BANK BUTTONS 1~4 - These buttons are used to store either four cue points or four samples. Each Bank
Button can store either a sample or a cue point. To play your programmed samples, press the Sample button
and then press the Bank Program button.
Loading...