SKP Pro Audio PRO-57 Instructions Manual

PPRROO-

-57

PROFESSIONAL MIC

R

OPHONE

INSTRUCTIONS

Thanks so much for using series advanced microphone, The microphone is

professional.

Directivity, high sensitivity, smooths frequency response. It is designed by fashion It is

truly the best choice in meeting, reports, lectures and etc

(1)

(2)

(3)

(4)

(5)

NAME PARTS (RECEIVER)

1. MIC head.

2. Power switch.

3. Cannon plug

4. Plug

5. Cable

OPERATION INSTRUCTION

HAND PRECAUTIONS

If the microphone head is covered by hand or the microphone is approached to the
speaker, a howling sound may be generated. This phenomenon of howling is caused by
the microphone picking up the sound output from the speaker. To prevent this, first
decrease the volume, then place the microphone so that it is not pointed to the speaker.
and that there is a sufficient distance between the microphone and speaker. The
microphone is sensitive equipment. Do not drip, hit it or apply strong shock to it.
Do not store the microphone in a place with high temperature or humidity.

POLNTER FOR PROPER USE OF
MICROPHONE

The optimum distance between the microphone and mouth is from 5 to 10
centimeters. If the microphone is too close to the mouth, the sound may be unclear
with too-muchenhanced bass(pr o ximity effect) or may be uncomfortable to ears with
pop noise generated every time the singer breathes in and out.

PLUGGING THE CONNECTOR IN/OUT
To plug in:

Align the hollow part of the output connector on the microphone body with projected
part of the connector on the cord, and push in until a CLICK sound is heard.

To plug out:

While holding the tab on the cord connector deperessed, pull it out of the connector
on the microphone.

Specifications:

• Wire Microphone

• Frequency Respon

se: 60-16.000Hz

• Im

pendence: 600ohm

• Sensitivity:

75dB

• Ty

pe: Dynamic

• Directivity: Uni-directional

• Body: Metal

SKP Pro Audio