SKP Pro Audio EQ-215 F User Manual

1

User’s Manual

EQ-215 F

2

IMPORT ANT SAFETY INSTRUCTIONS

WARNING: W hen usi ng electric products, basic cautio ns should always be followed, including t he

following.

1. Read all safety and operat ing instructions before using this product .

2. All safety and operating instructions should be retained for future reference.

3. Obey all cautions i n the operat ing instructions and on the back of the unit.

4. All operating instructions should be followed.

5. This product s hould not be used near water, i. e. a bathtub, sink, swimming pool, wet bas ement,
etc.

6. This product s hould be located s o that its pos ition does not i nterfere with its proper ventilat ion. It
should not be placed flat against a wa ll or placed in a built-in enclosure that will impede the flow of
cooling air.

7. This product should not be placed near a s ourc e of heat such as a stove, radiator, or another heat
producing amplifier.

8. Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.

9. Never break off the ground pin on the power supply cord.

10. Power supply cords should always be handled carefully. Never walk or place equipment on power
supply cords . Periodically check cords for cuts or signs of stress, especially at the plug and the
point where the cord exits the unit.

11. T he power supply cord should be unplugged when the unit is t o be unused for long periods of
time.

12. If this product is to be mounted in an equipment rack, rear support should be provided.

13. Metal parts can be cleaned with a damp rag. The vinyl covering used on some units can be
cleaned with a damp rag or an ammonia-based household cleaner if necessary. Disconnec t unit
from power supply before cleaning.

14. Care should be taken so that objects do not fall and liquid is not spilled into the unit through the
ventilation holes or any other openings.

15. This unit should be check ed by a qualified service tec hnician if:

 The power supply cord or plug has been damaged.
 Anything has fallen or s pil led into the unit.
 The unit does not operate correctly.
 The unit has been dropped or the enclosure damaged.

16. The user should not attempt to service this equipment. All service work should be done by a
qualified service technician.

CHARACTORS:

EQ 215 F



45MM Sim Potentiometer

 Feedback Locating System
 Gain Switchable(6DB/12DB)
 40HZ Low Frequency Cut
 EQ/BYPASS
 XLR
 Function Indicator
 2X15 Band 2/3 Octave