SKP Pro Audio DMP8006 Operating Instructions Manual

OPERATING INSTRUCTIONS P01 10~OPERATING INSTRUCTIONS P01 10~

PROFESSIONAL DUAL CD PLAYERPROFESSIONAL DUAL CD PLAYER

REPRODUCTOR PROFESIONAL DE CD Y MP3REPRODUCTOR PROFESIONAL DE CD Y MP3

REPRODUTOR PROFISSIONAL DE CD E MP3REPRODUTOR PROFISSIONAL DE CD E MP3

INSTRUCCIONES OPERATIVAS P11 21~INSTRUCCIONES OPERATIVAS P11 21~
INSTRUÇÕES DE OPERAÇÃO P22 32~INSTRUÇÕES DE OPERAÇÃO P22 32~

1. Read Instructions – All the safety and operating
instructions should be read before this product is
operated.

2. Retain Instructions － The safety and operating
instructions should be retained for f uture r eference.

3. Heed Warnings － All warnings on the appliance
and in the operating instructions should be adhered
to.

4. Follow Instructions － All operating and use
instructions should be followed.

5. Water and Moisture － The appliance should not
be used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, and the like.

6. Carts and Stands － The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.

A

n appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.

7. Wall or Ceiling Mounting － The product should
be mounted to a wall or ceiling only as recommended
by the manufacturer.

8. Heat － The appliance should be situated away
from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat.

9. Power Sources – This product should be operated
only from the type of power source indicated on
the rating label. If you are not sure of the type of
power supply to your home, consult your product
dealer or local power company. For products
intended to operate from battery power, or other
sources, refer the operating instructions.

10. Grounding or Polarization – This product may be
equipped with a polarized alternation-current line
plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
polarized plug.

11. Power-Cord Protection

－

Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to the
cord in correspondence of plugs, convenience
receptacles, and the point where they exit from
the appliance.

12. Cleaning - The appliance should be cleaned only
as recommended by the manufacturer.
Clean by wiping with a cloth slightly damp with
water. Avoid getting water inside the appliance.

13. For AC line powered units - Before returning
repaired unit to user, use an ohm-meter to
measure from both AC plug blades to all exposed
metallic parts. The resistance should be more
than 100,000 ohms.

14. Non-use Periods－The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.

15. Object and Liquid Entry－Care should be taken

so that objects do not fall and liquids are not
spilled into the enclosure through openings.

16. Damage Requiring Service－The appliance should

be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been

damaged; or

B. Objects have fallen, or liquid has been spilled

into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate

normally or exhibits a marked change in

performance; or

E. The appliance has been dropped, or the

enclosure damaged.

17. Servicing－The user should not attempt any
service to the appliance beyond that described in
the operating instructions. All other servicing
should be referred to qualified service personnel.

18. Ventilation – Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should
not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is the
manufacturer’s instructions have been adhered to.

19. Attachments – do not use attachments not
recommended by the product manufacturer as
they may cause hazards.

20. Accessories – Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.

21. Lightning – For added protection for this product
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent
damage to the product due to lightning and
power-line surges.

22. Replacement Parts – When replacement parts
are required, be sure the service technician has
used replacement parts specified by the
manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.

23. Safety Check – Upon completion of any service
or repairs to this product, ask the service
technician to perform safety checks to determine
that the product is in proper operating condition.

1

CAUTION: To reduce the risk of electric shock, do not remove
any cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel only.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use
to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.

CAUTION

To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet
unless the blades can be fully inserted to prevent blade exposure.

1. Precautions on handling compact discs



Do not allow fingerprints, oil or dust to get on the surface of the disc.



If the disc is dirty, wipe it off with a soft dry cloth.



Do not use benzene, thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths
to clean discs.



Always handle discs carefully to prevent damaging the surface; in particular when removing a disc from its
case or returning it.



Do not bend the disc.



Do not apply heat.



Do not enlarge the hole in the center of the disc.



Do not write on the label (printed side) with a hard-tipped implement such as a pencil or ball point pen.



Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors in winter.



Do not attempt to dry the disc with a hair dryer, etc..

2. Precaution on storage



After playing a disc, always unload it from the player.



Always store the disc in the jewel case to protect from dirt or damage.



Do not place discs in the following areas:

(1) Areas exposed to directs sunlight for a considerable time.
(2) Areas subject to accumulation of dust or high humidity.
(3) Areas are affected by heat from indoor heaters, etc..

DO NOT OPEN
RISK OF EL ECT RIC SHOCK

2

 Auto cue  Digital out
 Pitch Bend  Folder Search
 Pitch display  Frame search
 Auto/manual BPM

 Relay playback

 Single/Continuous  4 fast search mode
 Plays MP3 and CD discs  Transport protection
 8 times over sampling 1 bit D/A converter  10 seconds Anti Shock Protection (per side)
 Seamless Loop (uninterrupted loop playback)
 Selectable elapsed, remain and total remain time display
 Relay play allow consecutive playback during two decks
 Instant start within 10ms (sound is produced immediately when the PLAY button is pressed)
 Adjustable pitch percentages: +/-4%,+/-8%,+/-16%,or +/-100% (+/-100% can only be done with actual music

CDs)

1. POWER SWITCH button:

When the power switch

is pressed, the power turns on and the led is lit.

2. OPEN/CLOSE button:

Press this button to open
and close the disc tray. This button is disabled
during playback.

3. DISC tray:

Use the OPEN/CLOSE button to
open disc tray and put the CD in place. If the tray
is not closed after 60 sec, it will close
automatically to prevent damage.

4. AUDIO OUTPUTS:

Output for the audio signals is
from each player. Use the supplied RCA cables to
connect these outputs to the CD/line inputs of
your mixing unit.

5. DIGITAL OUT socket:

Use this connector to
connect the digital signal (S/PDIF format) to the
input of a digital amplifier or digital recorder (ex.
Mini disc)

6. VOLTAGE selector:

115V AC and 230V AC

switch.

7. POWER connector:

This is the main power
connection. Only use the supplied power cord.
Use of any other power may result in sever
damage to the unit. Be sure the local power
matches the unit’s required power.

8. CONTROL connector:

Use the supplied mini­DIN cable to connect this output to the control
unit.

1

3

2

4

8

7

5

4

5

6

3

1. OPEN/CLOSE button:

Press to load or eject the
disc. Each press will open or close the disc tray
on the transport. NOTE: If the tray will not open
when the disc is playing, first press the
PLAY/PAUSE button.

2. SEARCH mode button:

Press this button to
toggle the function of the JOG WHEEL between
fast search mode (the yellow LED is lit) and
normal mode. The fast search function is
automatically turned off when the JOG WHEEL i s
not used for more than 10 seconds.

 PLAY MODE:

normally the JOG WHEEL is used
as pitch bend tool to synchronize the beats o f the
playing track to another track. When the fast search
mode is turned on, you can use the JOG WHEEL
to search very quickly forward /backward inside
the current track.

 PAUSE MODE:

normally the JOG WHEEL is used
to search very precisely (1 frame precision) fo r the
exact cue point. When the fast search mode is
turned on, you can use the JOG WHEEL to search
very quickly forward/backward inside the current
track.

3. LCD display:

Shows all-important information

needed during playback. Refer to the next
chapter for more information.

4. PITCH slider:

This slider is used to adjust the
playback pitch percentage when the PITCH
function is activated. The slider is a set
adjustment and will remain set until the pitch
slider is moved or the PITCH function has been
turned off. The maximum pitch range of the slider
is +/-16%. This adjustment can be made with or
without a CD in the drive. The pitch adjustment
will remain even if a disc has been removed, and
will reflect on any other disc loaded into the unit.
That is to say, if you set a +2% pitch on one disc,
remove that disc and insert another, that disc will
also have a +2% pitch. The amount of pitch being

applied will be displayed in the LCD. Use this
slider to match the BPM’s of this unit to that of
another music source. By changing the pitch of
one disc with respect to the other in this way, the
beats can be matched.

5. RELAY button:

When you switch the Relay
function on, alternatel y a track will be played from
both CDs until the relay function is disengaged.
You can always put a new CD in the player that
is waiting in standby mode. In this way you can
create an endless program. Perfect for use in
pubs etc.

6. SGL/CTN button:

You can choose between

“single track mode” and “continuous play”.

 Continuous play:

the complete CD will be played

without interruption. (mostly used in pubs)

 Single track:

player stops at the end of each
track and waits at the beginning of the next
track. (mostly used by deejays) Push the SGL/
CTN button for more than 1 second to switch
between normal and “auto cue” mode. In “auto
cue” mode the player waits at the first music
note of each track. This means that badly
indexed CDs will not interfere with the instant
start capabilities of this CD player. This is a
very useful feature for deejays!

7. TIME button:

The TIME button switches between
elapsed playing time, remaining time in a selection
and total remaining time of the disc. (standard
=remaining / track)

8. JOG WHEEL:

This jog wheel serves 4 functions
depending on the mode you are working in.



The jog wheel acts as a slow frame search (1/75

sec) control when the CD is not playing but either
paused or set to a cue point. To set a new cue
point, spin the wheel then press PLAY or IN
when you have determined the proper position.
Press CUE to return to the “CUE POINT”.

CONTROLS AND FUNCTION Control unit

20

21

9

15

13

1

2

3

5

4

6

7

8

11

10

12

16

17

18

19

14

4



If the track is playing and this search function
is not active, the jog wheel temporarily bends
the pitch of the music up to+/-10% by rotating
the wheel clockwise to speed it up or counter­clockwise to slow it down. The amount of pitch
change is determined by the speed of rotation.



If the search function is active, you will be able
to search at a higher speed through the current
track.



As the selected songs function: Whenever press

or button to select the desired song,
the search LED will show by blinking. You can
rotate the wheel to select song when the LED
is blinking. The search LED will continue to
blink until the selected song is finished.

9. IN button:

Allows you to set the cue point without
stopping the playback (CUE ON THE FLY). This
button also sets the beginning of a seamless loop.
When the button contains a cue point it lights up.

10. OUT button:

Used to set the end point when
looping music. The player starts to loop
seamlessly until you press this button again to
exit. When a loop is programmed but not active
you can also restart the loop. The point where
you press the button will be memorized as the
new end point of the loop.

11. RELOOP / STUTTER button :

This button has 2

functions:　

Reloop:

When a loop was programmed and you
have hit the OUT button, press the RELOOP/
STUTTER button to enter the loop again. To exit
the loop presses the OUT button.

Stutter:

When a loop is playing you can press this
button to restart the loop at once. You can also
press this button when a track is not playing in loop.
Every time the RELOOP/STUTTER button is
pressed, it will restart the music from the pre­programmed cue point. The stutter effect adds
extra creativity to your performance.

12. TRACK search buttons:

These buttons are
used to select the track to be played forward skip
& backward skip.

13. FOLDER button:

This button is used to toggle
between folders and tracks. Press this button to
show the folder that is playing in the LCD. This
button is only for Mp3 discs.

14. TAP/BPM button

TAP/BPM button: The unit has a full automatic

BPM-counter. In some rare cases the automatic
beat counter doesn't count as it should do (be at ar e
out of the normal range or there' s simply no beat
to detect) In these cases you can help the beat
counter by manually tapping this button to the rhythm
of the beat.

Switching between BPM and PITCH display:

standard the display is set to PITCH mode, When­ever press TAP/BPM button in order to look over
the function of automatic BPM or manual BPM for
the first time, BPM/PITCH METTER content on LCD
is BPM value, show time for about 3 seconds and
get back to PITCH and show automatically promptly.

Switching between automatic BPM and manual
BPM:

Press and hold the TAP/BPM for about 1 se c

to turn the automatic BPM function on and off.

15. CUE button:

Pressing the CUE button during
playback provides an immediate return to the
position at which play was started. Playback starts
immediately from the programmed cue point for
as long as the CUE button is pressed. The CD
player jumps back to the cue point as soon as the
CUE button is released.

Also with the unit in pause mode (Play/Pause button
blinks) the jog wheel is used to set a different start
point. By pressing "PLAY/PAUSE" or “IN” button
followed by "CUE", you can confirm this n ew cue
point.

16. PLAY/PAUSE button:

Every time you press the
PLAY/PAUSE button the CD player changes from
play to pause or from pause to play. The button
blinks as long as the player is set to pause.

17. SEARCH buttons

This search button allows you to quickly
scan backwards through a track.

This search button allows you to quickly
scan forwards through a track.

18. PITCH button:

This button is used to turn the
speed function on and off. You can also select 3
different pitch ranges (+/-4%, 8%, 16%): every
time you press the “-” button shortly while you
keep the PITCH bu tton pres sed, you will change
the pitch range. When the pitch range of +/­100%(CD-A only) is selected, the 4%, 8% and
16% LEDs will be illuminated.

19. PITCH BEND buttons:

The speed rises while the
“+button” is pressed and returns to the original
pitch when the button is released. The speed
drops when the “–button” is pressed and returns
to the original pitch when the button is released.
These buttons can be used to synchronize the
beats of 2 tracks.

20. CONTROL START sockets:

If you are using a
mixer with fader start function, connect the player
with the fader start of the mixer. Please note t hat
these sockets must never be connected with any
voltage.

21. CONTROL CONNECTOR:

Connect the main

unit here, using the supplied mini-DIN cable.

5

1. AUTO CUE : This will indicate if the Auto Cue is
on or off. Press and hold the SGL/CTN for 1 sec.
to turn the Auto Cue function on and off.

2. TRACK INDICATOR: This 3-digit indicator
details a current track. The number displayed in
the track indicator is a direct reference to a track
being selected a track in play, pause, or cue
mode.

3. FOLDER/TRACK INDICATOR: This indicator
shows you if you are looking at the track number
or the folder number.

4. PLAY / PAUSE INDICATOR: When the unit is in
play mode the “PLAY” indicator will glow, when
the drive is in pause mode the “PAUSE” indicator
will glow.

5. CUE INDICATOR: This indicator will glow when
the unit is in CUE mode and will flash every time a
new CUE POINT is set.

6. SINGLE INDICATOR: This indicates that the CD
drive is in single play mode, the track will play
once and return to CUE mode. If the single
indicator is not on the unit is in continuous mode
the drive will play all the remaining tracks on the
disc until you stop it or power is interrupted.

7. MP3 INDICATOR: This will indicate that a Mp3
disc is loaded in the drive.

8. TIME BAR INDICATOR: This bar gives a visual
approximation of a track's or disc's remaining
time. This bar will begin to flash when a CD is
ending or a track if the unit is in "SINGLE" mode.

9. LOOP INDICATOR: Appears when the CD is
repeating a particular area with the music on the
CD.

10. RELOOP INDICATOR: Appears when the CD
has had a loop set previously and can go back to
loop again.

11. PITCH INDICAT OR: Indicator will light up when
the Pitch is activated.

12. BPM / PITCH METER: Shows either the
percentage change in pitch or the BPM of the
song. The meter will display either the BPM’s of
the current track or the pitch percentage applied
by the PITCH SLIDER.

13. BPM INDICATOR: Indicator will light up when
TAP/BPM button is engaged.

14. TIME DISPLA Y: These indicators detail the
Minutes, Seconds, and Frames. The meter will
display either the elapsed time, or remaining time
of a track. The time displayed in the meter will
directly reflect the time indicator.

15. CHARACTER DISPLA Y: This will display the
name of the file, artist, and title when a Mp3 disc
is loaded.

16. TOTAL REMAIN INDICATOR: When “TOTAL”
and “REMAIN” are indicated the TIME
DESCRIBED in the LCD will define the total disc
remaining time.

17. REMAIN INDICA TOR: When “REMAIN” is
indicated in the LCD DISPLAY the TIME
DESCRIBED in the LCD will define the current
track's remaining time.

18. ELAPSED INDICATOR: It is for showing time as
it is taking place.

19. AUTO BPM: This will indicate that the AUTO
BPM counter is active.

LCD display

3

2

1

4

5

6

7

8

9

10

11

12

13

14

15

19

17

18

16

6

Most of the common functions are explained in the previous chapter “controls and functions” In this chapter we
talk about the functions that need a little more explanation.

SOME GENERAL FUNCTIONS:

 SLEEP MODE:

The CD player automatically shuts off the transport and laser after about 15 minutes (when in pause or cue
mode). This extends the life of your motor drive and laser. During sleep mode the display shows the word
“SLEEP”. To wake up the player, just press the cue or play button, the display turns to normal and is ready
to receive instructions.

 RELAY FUNCTION:

First open the 2 faders of the CD inputs on your mixer. Press the RELAY button to enable the relay function,
the relay LED turns on. Put a disc in both players and start playback on one of the units. Alternately at rack
will be played from both units until the relay function is disengaged. You can always put a new CD in the
player that is waiting in pause. In this way you can create an endless program, perfect for use in pubs etc

 PITCH BENDING:

This function is used to synchronize the beats of two tracks. This can be done in two ways:

(1) PITCH BEND buttons: The speed increases or decreases respectively as long as the PITCH BEND+ or

PITCH BEND- buttons are pressed.

(2) JOG WHEEL: During play mode the JOG WHEEL will temporarily bend the pitch of the music by turning

the JOG WHEEL clockwise to speed up or counterclockwise to slowdown. The rotation speed the JOG
WHEEL determines the percent of pitch bend.

 PLAYING/RECORDING CD-R and CD-RW

Apart from normal audio CD’s the unit can play both CD-R (CD recordable) and CD-RW (CD rewriteable).
Please note that you should always use the “disc at once” and “track at once” disc writing options! Although
the unit is capable of reading CD-R and CD-RW recorded at higher speeds, we suggest not using recording
speeds more than x12 to increase readability. Always buy good quality brands for CD-R and CD-RW! If the
disc is multi session, it will only play the first session.

ABOUT LOOPS

 CREATE A LOOP

While a track is playing, press IN button to program the starting point of the loop. Now press the OU T button to
program the endpoint of the loop. The seamless loop start splaying at once.(With some practice you will be
able to create perfect loops!) While the loop is playing, you can press the OUT button again to exit the loop and
continue the rest of the track.

 RESTART A LOOP

This can be done in 3 ways
(1) When a loop is programmed and yo u left it by pressing the OUT button , just press RELOOP to restart the

loop.

(2) When a loop is programmed and you left it by pressing the OUT button, just press OUT again to restart

the loop. The point where you pressed OUT is now programmed as the new endpoint of the loop.

(3) When the loop is still playing, press the RELOOP b utton to restart the loop immediately. You can repeat

this several times to create a “Stutter” effect.

 Frame search

This is done by first pausing then using the jog wheel to set the starting point. (When you use the jog wheel
the monitor function allows you to hear what is playing.) Once you reach your desired starting point, you can
set a cue (starting) point by pressing PLAY/PAUSE button.

7

1. Checking the Contents

Check that the carton contains the following items:
(1) Main Unit

(2) Controller Unit
(3) Operating Instructions (This Booklet)

(4) ONE (1) 8P cable right angle
(5) Two (2)2P RCA path cord (L/R)

(6) Two (2) Auto-start cable
(7) ONE (1) AC power cord

2. Installing the Units

(1) Place your unit on a flat surface or mount it in a secure rack mount case.

(2 ) Be sure the player is mounted in a well-ventilated area where it will not be exposed to direct sunlight, h igh

temperatures, or high humidity.

(3) Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesirable

interference.

CAUTION:

 The player will work normally when the main unit is

mounted with the front panel at within 15 degrees
of the vertical plane. If the unit is tilted excessively,
discs may not be loaded or unloaded properly.

 The control panel's LCD’s are designed to be clearly

visible within the angles. Mount the control unit so
that the visual angle is within this range.

3. Connections

(1) Turn off the POWER switch
(2) Connect the RCA cord to the input on your mixer..
(3) Connect the control cords to the REMOTE connector on the main unit.

CAUTION:

 Be sure to use the supplied control cords. Using another type of cable may result in damage.
 Be sure the power is off when connecting the control cords. Otherwise the units may not work properly.

15

0

Main unit

45

0

5

0

Sight point

8

When you have finished using the CD player, before switching off the power, be sure that the disc holder had
been closed with the OPEN/CLOSE button.

CAUTION:

Do not forcibly close the disc holder when the power is off.

Do not switch off the power when the disc holder
is open.

POWER OFF

To avoid damage, please don’t switch off the power
until ”.no disc” or “time code” is showed on the LCD
after the disc holder has been closed with the
Open/Close button.

POWER OFF

APPLICATION Model MCD3000, Dual CD player with wired remote control.
POWER SOURCE AC 115/230V, 60/50Hz, 26Watts
DIMENSIONS

Main Unit 482(W)x 88.8(H)x 262.5(D)mm
Control Unit 482(W)x 88.8(H)x 94 (D)mm

WEIGHT

Main Unit 5.0 Kgs
Control Unit 1.6 Kgs

AUDIO CHARACTERISTICS (TEST DISC: TCD-782, LOAD=47KOHM)

ITEM TYPICAL LIMIT CONDITION
OUTPUT LEVEL 2VRMS +/-0.5dB 2VRMS +/-1dB 1KHz, 0dB
CHANNEL BALANCE WITHIN 0.2dB WITHIN 1dB 1KHz, 0dB
FREQUENCY RESPONSE 20-20KHz +/-0.4dB 20-20KHz +/-1dB 0dB OUTPUT
DE-EMPHASIS -20dB+2.4/-0dB -20dB+3/-0dB 16KHz,-20dB
CHANNEL SEPARATION (*2) 99dB 90dB 1KHz, 0dB
THD+N (*1) 0.0052% 0.01% 1KHz, 0dB
S/N (*2) 120dB 90dB 1KHz, 0dB

Note: *1: WITH 20KHz LOW PASS FILTER.

*2: WITH 20KHz LOW PASS FILTER AND "IHF-A" WEIGHTED.

SEARCHING TIME (TEST DISC: TCD-792)

ITEM TYPICAL LIMIT CONDITION
SHORT ACCESS TIME 2Sec 4Sec PLAY NEXT TRACK
LONG ACCESS TIME 4Sec 6Sec TRACK 1 TO 20,20 TO 1

9

PLAYABILITY

ITEM TYPICAL LIMIT CONDITION
INTERRUPTION 1mm 0.7mm TCD-725
BLACK DOT 1mm 0.6mm TCD-725
FINGER PRINTS 75um 65um TCD-725
ECCENTRICITY 140um 140um TCD-712 W/O TRACK JUMP
VERTICAL DEVIATION 1mm 0.5mm TCD-731R

PICK-UP (SONY KSM-213CCM)
System Object lens drive system optical pick-up
Object lens drive system 2 dimensional parallel drive
Tracking detection 3 spot beam detection
Optical source Semiconductor laser
Wave length 780nm

GENERAL
System Compact Disc Digital Audio
Disc loading Front loading CD player
Display LCD Display
Pitch control range Within +/-4%,+/-8%,+/-16%, +/-100% for CD
Pitch bend

+/-16% (+/-100% for CD)

Pitch accuracy

+/-0.25 % (Pitch TEST DATA/Pitch TYPICAL=pitch accuracy)

Digital out level

0.5V+/-0.1 p-p @ LOAD = 75 ohm (option)

ENVIRONMENTAL CONDITION

Operating Temperature 5 to 35 ℃
Humidity 25 to 85% RH (non-condensing)
Storage Temperature -10 to 60℃

NOTES

(1) The specifications are subject to change to any improvement by negotiations in advance.
(2) The parts are subject to change to any improvement within the range of the specifications.

MP3 FORMAT

A

pplicable file extensions mp3 . MP3 . mP3 . Mp3
ISO9660 max. 63 characters
Joliet max. 63 characters
CD-ROM sector format mode-1 only
Max. number of Folders 255

Disc Format

Max. number of files max. 999 files (* note #1)

MPEG 1 Layer 3 standard (ISO/IEC 11172-3),
which provides for single channel (‘mono’) and
two-channel (‘stereo’) coding at sampling rates
of 32, 44.1 and 48kHz.

32/40/48/56/80/96/112/128/160/192/
224/256/320 kbps
Xing/VBRI VBR

MPEG 2 Layer 3 standard (ISO/IEC 13818-3),
which provides for similar coding at sampling
rates of 16, 22.05 and 24 kHz.

32/40/48/56/64/80/96/112/144/160
Kbps

MP3 Format

MPEG 2.5 Layer 3 standard, which provides for
similar coding at sampling rates of 8, 11.025
and 12 kHz.

32/40/48/56/64/80/96/112/144/160
Kbps

Disc at Once and Track at Once

Disc Writing Method

Multi Session If the 1

st

session is CDDA, you can
playback
Only CDDA track, If the 1

st

session is

MP3, you can playback only MP3 file.

Note #1: max.255 files each folder

10