SKP Pro Audio DMP-4010 Owner's Manual

Important To Safety

WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is
damaged or deformed, it may cause electric shock or
malfunction when used. When removing from wall
outlet, be sure to remove by holding the plug
attachment and not by pulling the cord.

2. In order to prevent electric shock, do not open the top
cover. If a problem occurs, contact your dealer.

3. Do not place metal objects or spill liquid inside the CD
player. Electric shock or malfunction may result.

Please, record and retain the Model name and serial
number of your set shown on the rating label.
Model No. ___________ Serial No. ___________

CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE THE COVER (OR
BACK). THERE ARE NO

SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of un insulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

‧

FOR U.S.A. & CANADA MODEL ONLY

CAUTION
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.

NOTE:
This CD player uses the semiconductor laser. To allow
you to enjoy music at a stable operation, it is
recommended to use this in a room of 5℃ 41℉ - 35℃
95℉.

CLASS 1 LABEL

DATE LABEL

CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
REFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

THE COMPACT DISC PLAYER SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE EXCEPT
PROPERLY QUALIFIED SERVICE PERSONNEL.

DOUBLE INSULATED - WHEN SERVICING, USE ONLY
IDENTICAL REPLACEMENT PARTS.

NOTE:
This unit may cause interference to radio and television
reception.

‧

Line Voltage Selection (for multiple voltage

model only)

 The desired voltage may be set with the

VOLTAGE SELECTOR switch on the
rear panel, using a screwdriver.

 Do not twist the VOLTAGE SELECTOR

switch with excessive force as this may
cause damage.

 If the VOLTAGE SELECTOR switch does not

move smoothly, please contact a qualified
serviceman.

115V

230V

Features

10 seconds of anti-shock memory
Instant start
Seamless loop
Pitch range: +/-100% +/-0.1% (+/-16% for

MP3)

4 hot cues for Sampler and Cue memory,

<5 sec. Each bank

Auto cue function (-48dB)
500 *4 sampler (cues) can be memorized

Selectable elapsed, remain and total

remaining time (audio only) display

Single/continuous play
Relay play allows consecutive playback

during two players

S/PDIF digital audio RCA coaxial
LCD display
Music Master Tempo
Mp3 playback

Controls and Functions

1.

DISPLAY PANEL  LCD-display for displaying

the different modes and functions.

2. SEARCH WHEEL − This wheel has 4 forward

and 4 reverse speed positions allowing you to
quickly scan through tracks. The more you turn
the wheel in either direction the faster you
search.

3. TRACK BUTTON − These buttons are used

the select a track. Tapping the button will
forward/back skip to the next track, holding down

the button will rapidly forward/back skip through
the tracks.

4. IN BUTTON − This function allows you to set a

cue point without music interrupt. This button
also sets the starting point of a seamless loop.
OUT BUTTON − This button is used to set the

ending point of a loop. A loop is started by
pressing the IN button, pressing the OUT button
set the loop ending point. The loo

p will continue

to play until the OUT button is pressed once