Skope TMEF Series, TMEF1500, TMEF650, TMEF1000 User Manual
TMEF Series
User Manual
MAN10132 Rev. 1.0 Oct. 2010
SKOPE Vertical Freezer
TMEF Series
SKOPE Vertical Freezer
Type: (CAREL ir32 Controller)
User Manual
MAN10132
Rev. 1.0 Oct. 2010
© 2010 SKOPE Industries Limited. All rights reserved.
SKOPE Industries Limited reserve the right to alter specifications without notice.
is a registered trademark of SKOPE Industries Limited.
SKOPE INDUSTRIES LIMITED
Head Office
PO Box 1091, Christchurch
New Zealand
Freephone: 0800 947 5673
Fax: (03) 983 3896
E-mail: enquiry@skope.co.nz
Website: www.skope.co.nz
Trademark Infringement
The SKOPE trademark on this product is infringed if the owner, for the time
being, does any of the following:
• Applies the trade mark to the product after their state, condition, get-up or
packaging has been altered in any manner
• Alters, removes (including part removal) or obliterates (including part
obliteration) the trade mark on the product
• Applies any other trade mark to the product
• Adds to the product any written material that is likely to damage the
reputation of the trade mark
Notice of the above contractual obligations passes to:
• Successors or assignees of the buyer
• Future owners of the product
SKOPE TMEF Series
User Manual
iii
CONTENTS
1 Installation
Safety First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Positioning the Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Before Operating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Cabinet Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2 Operation
Automatic Start-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Loading Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CAREL Electronic Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Faceplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Controller Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Defrost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Alarms and Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Manual Defrost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Continuous Refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Buzzer Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Parameter Modification (if keypad is enabled) . . . . . . . . . . . . . . .12
3 Servicing
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Condenser Coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Interior Side Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Centre Pillar Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4
Installation
User Manual
SKOPE TMEF Series
1 Installation
Safety First Always observe safety precautions when using any electrical appliance.
Read these instructions carefully and retain them for future reference.
When the appliance is used by or near young children or infirm persons,
close supervision is necessary, especially to ensure children do not play
with it.
Do not use this appliance for other than its intended use.
Do not cover the grilles or block the entry or exhaust of airflow by
placing objects up against the refrigeration freezer unit.
Do not probe any opening.
Only use this appliance with the voltage specified on the cabinet rating
label affixed to the refrigeration unit.
Ensure the freezer has adequate ventilation as this is essential to
economical, high performance.
Be careful not to touch moving parts and hot surfaces.
For your own safety and that of others, ensure that all electrical work is
done by authorised personnel.
If the power supply flexible cord becomes damaged, it must be replaced
by an authorised service agent or similarly qualified person in order to
avoid a hazard.
Ensure all necessary safety precautions are observed during installation
or removal of the refrigeration unit.
The freezer is not designed to be stable while in motion. Use extreme
caution when moving or transporting the freezer.
WARNING
The TMEF1500 (3 door) freezer has two seperate power
supplies.
CAUTION
Always isolate the cabinet from the power supply before
attempting any maintenance.
CAUTION
Never overload the power supply, which could damage the
chiller and product. See the rating label inside the cabinet for
the safe power supply and current draw.
5
SKOPE TMEF Series
Installation
User Manual
Positioning the Cabinet
Before
Operating
Follow the below steps to ensure the back sign panel is reversed and the
rear spacer is protruding from the back of the cabinet (TMEF1500 3 door
cabinet only). This will provide the necessary air gap at the rear of the
cabinet for correct operation.
1. Cut the cable ties securing the sign back panel to the sign side panels.
2. Reverse the sign back panel so that the rear spacer protrudes from the
rear of the cabinet, and attach the sign back panel to the cabinet by
hooking into the slots on the sign side panel ends.
3. Retrieve and unravel the power cords and fit through the exit holes on
top of the rear spacer.
Power Cord The freezer has a flexible power cord fitted with a 3-pin plug, which exits
from the top rear of the cabinet. Pull the power cord around so that it’s not
trapped before you position the cabinet.
Note: The TMEF1500 (3 door) freezer has two power cords, one for each
refrigeration unit.
Cabinet
Location
The location of the freezer may be the single most important decision that
will extend its life and ensure economical, high performance. We
recommend that you put the freezer in the coolest place possible because it
will use less power and last longer.
Avoid direct sunlight, warm draughts etc. Allow adequate space for doors to
open and close properly. Self-closing doors have internal torsion bars
pretensioned at the factory, and must be unobstructed. Ensure the cabinet
sits on a level surface so that the doors shut and correctly seal. Level footing
also prevents the condensate tray from overflowing.
Power Cord
Rear Spacer
Power Cord Exit Hole
Sign Back Panel
Back of Cabinet
Hanging
Hook/Slot
Hanging
Hook/Slot
Ventilation Slots
Loading...