koda Auto pursues apolicy of constant product and model development. Wetrust that you will understand that changes to modelsinterms of shape, equipment and engineering, may be introduced at any time. It is therefore not possible for legal claims to be madebased on the data, illustrations and descriptions contained in this Owners Manual.
Reprint, reproduction or translation, either in whole or in part, is not permitted without the written consent from koda Auto.koda Auto expressly reserves all rights relating to copyright laws.Wereserve the right to make changes to this document.Published by KODA AUTOa. s.
− Mark a function or a sub-menu, set a value (turn)
− Select a function or a sub-menu, confirm a value (press)
2
and : The backwards/forwards keys operate the “active” audio
source.
− Radio Mode - press briefly: Station change; press for a long time:
Manual station selection
− CD Mode - press briefly: Change of track; press for a long time: fast
forward/reverse
Switching on/off: Rotary/push knob for switching the navigation
system on/off (press) and volume control (turn)
4
Selector keys
INFO
− - repeats the last announcement during the guidance and
shows the current travel destination, the current position
(address) and geo-position.
RADIO
− – changes over into radio mode and changes the
frequency range when in the radio mode.
CD
− - changes over into CD mode.
NAV
− - switches over to navigation.
TRAFFIC
− – switches over to the stored TMC traffic reports display
(Traffic-Message-Channels).
SETUP
− - enables setting-up the individual fields.
Function keys next to the display. The function is displayed in the
relevant corner of the display. Square brackets mean that the function
is currently not available (e. g. [DELETE], if you do not wish to delete).
6
Button for adjusting the sound
7
CD-case
Display
9
Eject button - briefly press the button to move the inserted CD
into the position ready for removal.
10
Button - Set flagged destination.
11
Button - back to the previous menu point or to the last setting.
Equipment which is marked * is only standard on certain model versions or suppliable as special equipment for certain models.
Important information
Warran ty
The equipment warranty terms and conditions also apply for new vehicles.
After the expiration of the warranty, a piece of equipment in need of repair will be
replaced with a reconditioned, original item with spare part warranty. It is, however,
a precondition that the housing has not been damaged and no unauthorised
attempts have been made to carry out repairs.
Note
Damage within the meaning of the warranty must not be the result of improper
handling of the system or from unprofessional repair attempts. It is also essential
that there is no external damage.
Operation of the navigation system
The requirements of today's road traffic demand the driver’s full concentration at all
times.
Apart from the availability entertainment, the e xtensive and demanding equipment
details of this system also offer a wide range of information, which will help you to
reach your destination quickly and safely.
Radio3
But you should only operate the navigation system with its wide range of
possibilities when the traffic situation allows.
The volume settings must be selected in such a way that audible signals from the
outside, e.g. a Martins horn from utility vehicles (police cars, ambulances and fire
brigade), can be heard at all times.
WARNING
Please concentrate fully at all times on your driving! As the driver you are
fully responsible for road safety. Only use the functions in such a way that
you are always in full control of your vehicle in all traffic situations!
Before using the navigation system
• Please observe the respective traffic regulations when driving.
• Street and location names can be changed. It is therefore possible that the
names stored on the CD might not correspond to the changed names.
• The route calculated by the navigation system is a recommendation for
reaching the intended destination. While driving please pay attention to stopping
restrictions, traffic lights, one-way streets, lane change restrictions, canals and
ferries.
WARNING
Road traffic legislation (StVO) applies at all times, even if a driving recommendation contradicts the StVO.
Caution
• Inserting a second CD while a CD is being ejected can destroy the CD drive in
the unit. Please note that the CD ejection lasts a few seconds after pressing the
Eject button . During this time the lock in front of the CD case is open. It is
essential that you wait until the CD has been fully ejected before you try to insert a
new CD.
• Press the buttons and the keys of the unit gently in order to avoid damaging
them. Gentle pressure on the appropriate key is sufficient to operate the unit.
Please note that the rotary/push knobs have predetermined breaking points, in
order to reduce the risk of injury.
• Please note that a dirty or scratched navigation CD can considerably impair the
speed and the functions of the navigation system.
Using the display
Carefully handle the display because dents and scratches can occur through pressure of the finger or contact with sharp objects.
The display can be cleaned with a soft cloth and finger marks can be wiped away
with pure alcohol.
Note
Do not use solvent such as turpentine or petrol as they will corrode the display
surface.
Anti-theft protection
Anti-theft coding
Your radio is equipped with a convenience coding. If the radio is being operated for
the first time, the safety code is not only stored in the radio but also in the vehicle.
After disconnecting and reconnecting the battery, first of all switch on the ignition
and then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered.
In this case, please do not hesitate to contact a Škoda Service Partner or a Škoda
importer.
As the unit only functions after entering the safety code, this practically excludes its
use after a theft - a contribution to increased anti-theft safety.
Radio4
A
A
A
A
A
A
A
Note
The code is stored in the instrument cluster. This ensures that it is automatically
decoded (convenience coding). Manual input of the code is normally not
necessary.
Enter code
Fig. 1 PIN entry
– Switch on the radio if the ignition is on.
– Enter the safety code using the button .
– Confirm the safety code by pressing the button for a long time.
If you have confirmed a wrongly entered code, you can repeat once again the entire
process.
If the code number is entered incorrectly for the second time, the unit will be
blocked for approx. one hour. The safety code can only be entered again after one
hour has expired, with the unit switched on and the ignition key in the ignition lock.
The cycle - two attempts, blocked for an hour - will continue to apply.
1
1
Note
• Incorrect entries can be corrected with the function keys (back) ,
(forward) and with .
• After entering the four-digit code number OK is activated in the display.
CDELETEAA
D
←
B →
Basic setting
Switching the unit on and off
– The s yste m is switched on or off by t urni ng / pre ssin g th e rotar y / pu sh
3
knob .
If the key is pulled out of the ignition lock with the unit switched on, the unit wil
switch off automatically. You can switch on again the unit by pressing the
rotary/push knob . If the engine is switched off, the unit (discharge protection of
the vehicle battery) switches off automatically after approx. one hour.
If you have switched off the radio by withdrawing the ignition key, the radio
switches on again once the ignition is on.
General - operation
3
Fig. 2 Example menu
Radio5
A1A
A1A1A
A
A
Mark and select menu point
– Turn the button until the desired menu point is highlighted with an
upper and lower line ⇒ page 4, fig. 2 .
– Press the button to select the menu point.
Set value
– Turn the button until the desired value is set.
– Press the button in order to confirm the set value.
The “scroll bar” ⇒ page 4, fig. 2 shows that further menu points become visible
if the sliding regulator is moved completely to the bottom.
Square brackets mean that the function is currently not available (e. g. [Fader] on
vehicles without rear loudspeakers).
An entry with a opens an additional sub-menu.
A next to an entry shows the presently selected set-up (e.°g currently played
station).
Some functions can only be switched on or off. A filled out box behind an entry
means that the function is switched on, an “empty” box means that it is switched
off.
1
B
A
System Setups
Press the button and select the function key .
You can select between the following parameters:
SETUPSYSTEM
• Menu language - Menu language for the displays and the language messages.
• Measuring unit - determining if the distances are displayed in miles or kilom-
eters.
• Time setting - manual time setting. Normally the navigation unit takes over the
time from the instrument cluster of the vehicle.
• Factory setting - Factory setting.
Display Settings
BRIGHTNESS
DISPLAY OFF
for switching on again.
- Set display brightness.
- Switching off the display. Press the function key or any unit button
Audio settings
– Press the button and set the desired value using the aid of the
1
button .
You can select between the following parameters:
• Balance - Setting of the volume ratio between the left and right side;
• Fad er* - Setting of the volume ratio between the front and the rear;
• Tre bl e - Treble setting;
• Midtone* - Midtone setting;
• Bass - Bass setting;
• Volume settings - individual volume settings for different audio sources.
Volume settings
• Traffic announcement - Volume of the incoming traffic announcements;
• Navigation volume - Volume of the navigation announcements;
• Phone volume* - Volume of the mobile phone calls;
• Switch on volume - Volume after switching on;
• GALA - Speed dependent volume adaptation. The radio increases automati-
cally its volume with the increasing vehicle speed.
Loading...
+ 15 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.