Skoda RADIO NAVIGATION SYSTEM AMUNDSEN - FOR FABIA, RADIO NAVIGATION SYSTEM AMUNDSEN - FOR OCTAVIA 03-2010, RADIO NAVIGATION SYSTEM AMUNDSEN - FOR ROOMSTER, RADIO NAVIGATION SYSTEM AMUNDSEN - FOR YETI 03-2010 User Manual
SIMPLY CLEVER
RADIO NAVIGATION SYSTEM AMUNDSEN
ŠkodaAuto
Amundsen.indd 2 5.2.2010 14:04:03
Introduction
You have chosen a Škoda vehicle, which is fitted with a dynamic radio navigation system Amundsen (hereafter called the radio navigation system) - we thank you for your confidence in us.
We recommend that you read these operating instructions carefully so that you can quickly become familiar with
your radio navigation system.
Should you have any questions or problems with your radio navigation system, please do not hesitate to contact
your authorised Škoda Service Partner or importer.
National legal provisions, which deviate from the information contained in these operating instructions, take precedence over the information contained in the operating instructions.
We hope you enjoy using your radio navigation system and wish you pleasant motoring.
Yo ur Škoda Auto
s34g.6.book Page 1 Thursday, January 14, 2010 8:48 AM
Contents2
Contents
General information . . . . . . . . . . . . . . . . .
Equipment overview . . . . . . . . . . . . . . . . . . . . . . . . . .
Important information . . . . . . . . . . . . . . . . . . . . . . . .
Range selector key SETUP . . . . . . . . .
Sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup Telephone* . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup traffic programme . . . . . . . . . . . . . . . . . . . . . .
Setup Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Media set-ups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigation settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Range selector key RADIO . . . . . . . .
Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Traffic programme function TP . . . . . . . . . . . . . . .
Range selector key TMC . . . . . . . . . . . .
Displaying TMC traffic reports . . . . . . . . . . . . . . . .
Range selector key MEDIA . . . . . . . .
General information for CD operation . . . . . . .
Main menu MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MP3 and WMA data . . . . . . . . . . . . . . . . . . . . . . . . . . .
External sources* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Range selector key NAV
(Navigation)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destin. memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Range selector key PHONE . . . . . . . .
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
3
3
9
9
9
9
10
10
10
11
11
13
13
14
16
16
17
17
17
19
20
20
23
23
25
26
28
31
31
34
s34g.6.book Page 2 Thursday, January 14, 2010 8:48 AM
General information 3
General information
Equipment overview
Control button for switching the unit on/off (press) and for setting
the volume (turn) of the currently replayed audio source
Range selector key for selecting the corresponding menu:
− - changes over into the radio mode and changes the
frequency range when in the radio mode
− - changes over to the last played media source or selects a
new media source
− - Mute, if the telephone preinstallation is present in the
vehicle; activates the operation of the telephone.
− - switches on the navigation
− - switches on the stored TMC traffic reports display (Traffic-
Message-Channels) = Traffic Message Channel
− - enables setting-up the individually selected field
°and° : the backwards/forwards keys operate the “active” audio
source
− RADIO mode - for the selection of the station from the station or
memory list
− MEDIA mode - for the selection of the previous or following track
(press briefly), fast forward/reverse (press for a long period of time)
CD case
Touch-screen (Touch-screen): fields circled in colour on the screen are
presently “active” and are operated by touching the screen
Eject key - press briefly to move an inserted CD, ready for removal,
into the initial position
- displays additional information depending on the current operating
mode
− RADIO mode - switches the radio text display on/off
− MEDIA mode - changes between the display of the time and the
name of the title during the MP3/WMA play function
− NAV mode - displays the information regarding the vehicle position
and enables additional functions (flagged destination, route list,
exclude a stretch)
− TMC mode - displays the currently received TMC station
Button to return from a menu to the previously selected menu
AUX socket to connect an external audio source
Menu control button
− Mark a function or a sub-menu, set a value (turn)
− Select a function or a sub-menu, confirm a value (press)
Function buttons - the function of the respective button is displayed on
the screen
Memory card case: The SD cards (Secure Digital) and the MMC cards
(Multimedia Cards) have a memory capacity of 4°GB and the SDHC
cards (Secure Digital High Capacity) have a memory capacity of 32°GB
and a dimension of 32 mm x 24 mm x 2.1 mm. The case for the memory
card is located next to the screen.
Explanation of symbols
items of equipment which are marked in such a way are only installed as standard
on certain models or are supplied as special equipment.
End of a section.
b The section is continued on the next page.
Important information
Warran ty
The equipment warranty terms and conditions also apply for new vehicles.
After the expiration of the warranty, a piece of equipment in need of repair will be
replaced with a reconditioned, original item with spare part warranty. It is, however, a
A
1 D
A
2
RADIO
MEDIA
PHONE
NAV
TMC
SETUP
A
3
A
4
A
5
A
6
A
7 º
A
8 y
A
9
A10A
11
A
12
s34g.6.book Page 3 Thursday, January 14, 2010 8:48 AM
General information4
precondition that the housing has not been damaged and no unauthorised attempts
have been made to carry out repairs.
Note
Damage within the meaning of the warranty must not be the result of improper
handling of the system or from unprofessional repair attempts. It is also essential that
there is no external damage.
Information on how to operate the radio navigation system
The requirements of today's road traffic demand the driver’s full concentration at all
times.
Apart from the availability entertainment, the extensive and demanding equipment
details of this radio navigation system also offer a wide range of information, which will
help you to reach your destination quickly and safely.
Only if the traffic situation allows it, should you operate the radio navigation
system with its wide range of possibilites.
The volume settings must be selected in such a way that audible signals from the
outside, e.g. a Martins horn from utility vehicles (police cars, ambulances and fire
brigade), can be heard at all times.
WARNING
• Please concentrate fully at all times on your driving! As the driver you are
fully responsible for road safety. Only use the functions of the radio navigation
system in such a way that you are always in full control of your vehicle in all
traffic situations!
• The following must always have priority over the driving recommendations:
• the road traffic legislation, even if the driving recommendations contradict
the StVO,
• the actual acknowledgement of traffic signs, light signals or signs placed by
the police at the relevant location,
• the facts and circumstances prevailing at the relevant location.
Before using the radio navigation system
• Please observe the respective traffic regulations when driving.
• Street and location names can be changed. It is therefore possible that the names
stored on the CD might not correspond to the changed names.
• The route calculated by the radio navigation system is a recommendation for
reaching the intended destination. While driving please pay attention to stopping
restrictions, traffic lights, one-way streets, lane changes, bodies of water and ferries,
railways etc.
Caution
• Press the buttons and the keys of the unit gently in order to avoid damaging them.
Gentle pressure on the appropriate key is sufficient to operate the unit. Please note that
the control buttons have predetermined breaking points, in order to reduce the risk of
injury.
• Do not use any pointed or sharp-edged objects to operate the touch-screen. Slight
finger pressure sufficient to operate the equipment. A display on the screen, which
cannot be called up by pressing the button, is therefore not available at that time.
• Please note that a dirty or scratched navigation CD can considerably impair the
speed and the functions of the radio navigation system.
Screen care
Treat the screen with great care, because dents and scratches can occur through finger
pressure or contact with sharp objects.
The screen can be cleaned with a soft cloth and finger marks can be wiped away with
pure alcohol.
Note
Do not use solvent such as turpentine or petrol as they will attack the screen surface.
s34g.6.book Page 4 Thursday, January 14, 2010 8:48 AM
General information 5
Anti-theft protection
The anti-theft coding of your radio navigation system prevents an operation of the
system after a voltage interruption, e.g. during a vehicle repair or after theft. After
disconnecting the battery, disconnecting the radio navigation system from the onboard voltage of the vehicle and after a fuse failure, the code must be entered before
the vehicle can be used again.
Enter code
– If a keypad appears after switching on with the command to enter the code, the
unit can be unlocked by entering the correct four-digit code number. The number
of the possible attempts is shown in the bottom screen line.
– Press a digit from to on the digit block displayed on the screen. The digit is
accepted in the entry line.
– After a four-digit order has been entered, the group of digits will turn grey (inactive)
and no further digits can be accepted in the entry line.
– Press on the screen in order to delete the digits in the entry line from right
to left and thereby correct your input, if necessary.
– If the correct code number is displayed in the entry line, press .
Code number
The code number can only be called up “online” via the Škoda system, as this guarantees even more effective anti-theft protection. Please contact your authorized Škoda
Service Partner, if necessary.
Incorrect code number
If an incorrect code is confirmed after entry of the code, the procedure can be repeated
twice. The number of possible attempts is shown in the bottom screen line.
If the code number is entered incorrectly for the third time, the unit will be blocked for
approx. one hour. It is possible to enter again the safety code after one hour has
expired, when the unit and the ignition have been switched on.
If three invalid attempts are then made again, the radio navigation system will be
blocked again for an hour.
The cycle - three attempts, blocked for an hour - will continue to apply.
Note
The code is normally stored in the instrument cluster. This ensures that it is automatically decoded (convenience coding). Manual input of the code is normally not
necessary.
0 9
Delete
OK
s34g.6.book Page 5 Thursday, January 14, 2010 8:48 AM
General information6
Operation when driving
The demands of today's road traffic require full concentration from all road users at all
times.
WARNING
• Always concentrate fully on your driving. Inattention by the driver can lead
to accidents and injuries.
• Do not allow yourself to be distracted by trying to use the unit, concentrate
instead on the traffic situation.
• Use the unit only if road, weather and traffic conditions permit and you w ill
not be distracted.
• The various volume settings must be selected in such a way that audible
signals from the outside, such as e.g. a Martins horn from police cars and fire
brigade, can be heard at all times.
Note
Depending on the country, some functions of the radio navigation system can no
longer be selected on the screen at certain speeds. This is not a malfunction, but corresponds to the legal requirements of this particular country.
Special functions
Parking aid*
If your vehicle is equipped with “parking aid” and after it is activated, the distance to
the obstacle is shown on the screen.
Climatronic*
If your vehicle is equipped with climatronic, a feedback is received on the screen when
changing the settings.
Personalisation
Your vehicle can be equipped with up to four keys. Individual settings of the unit are
always assigned to the key, which is currently inserted in the ignition lock. In practice,
this means that each time you use another vehicle key, the setting of the unit which is
assigned to the key is carried out.
Switching the system on and off
– The system is switched on or off by pressing the control button .
The last active audio source before switching off is repeated.
If the key is pulled out of the ignition lock while the unit is switched on, the unit will
switch off automatically. You can then switch the unit on again. If the ignition is
switched off, the system switches off automatically after approx. half an hour (vehicle
battery protection against discharging). This process can be repeated as often as
necessary.
General - operation
The screen of the unit is a so-called touch screen (touch-screen). Fields circled in
colour on the touch-screen are presently “active” and are operated by touching the
screen. Active fields, which call up a functio n or a menu, are called “function buttons”
/ .
The following information is displayed in the main menu:
the selected radio station (its frequency or designation);
selected waveband;
activation for the reception of traffic reports;
A
1
Fig. 1 Menu radio
ADA
F
A
A
ABA
C
s34g.6.book Page 6 Thursday, January 14, 2010 8:48 AM
General information 7
current menu.
“Pop-up window”
If you press the function key on the screen, a so-called “pop-up window” will open
in which all possible set-up options are displayed.
Briefly press the desired set-up option. The pop-up window will disappear and the
newly selected set-up option is displayed in the function key.
“Check box”
Some functions can only be switched on or off.
There is a so-called “Check box” in front of a function which can only be switched on
or off. A tick in the check box = indicates that the function is switched on, an empty
check box >, indicates that it is switched off.
Briefly press the corresponding function key for switching on or off.
Input mask for free text input
In some of the menus you can enter a free text, for example, when entering a new
destination or while searching for the name of a point of interest.
– Press to accept a character sequence offered by the system or press i n
order to delete the characters in the entry line.
– When in the entry window, press on a character shown on the keypad block to
accept it into the entry line.
– You can also delete or change the character sequence in the entry line as well as
insert additional characters.
Further input possibilities:
- changes from upper case to lower case and vice versa.
- opens the input mask for digits and special characters. The function key changes
to . Press , to change again to the letter input mask.
- space key for entering spaces.
- switches to the Cyrillic script.
or - moves the character entry cursor (the cursor) in the entry line to the left or
right.
- opens a pop-up window with special characters.
- deletes characters in the entry line starting from the position of the character
entry cursor from right to left.
Selecting letters based on specific characters
Some letters in the input masks are also marked with a small triangle “a”. This indicates that specific characters based on this letter can be selected.
Continue to press down on the corresponding function key with your finger until a
pop-up window with these specific characters can be displayed. Press to accept the
desired character into the entry line - the pop-up window will close. If no entries are
entered, the pop-up window will close automatically after a few seconds.
Input mask for selecting the destination address
A
E
A
F
Fig. 2 Input mask for free text input
OK Delete
:
;
A-Z A-Z
~
b
ÄÜ
Delete
Fig. 3 Input mask for selecting the
destination address
s34g.6.book Page 7 Thursday, January 14, 2010 8:48 AM
General information8
When entering the destination address, it is only possible to enter the characters in the
sequence which corresponds to the destinations stored in the navigation system.
Limit destination and select from the list
– You can open a list of the selectable destinations any time by pressing the function
key while making entries in the entry line. Only destinations selectable
from the navigation memory which correspond to the requirements and the character sequence in the entry line will be displayed.
– The number of selectable destinations will be displayed in the entry line if fewer
than 99 destinations can be selected.
– If fewer than six destinations are selectable, the entry window will close automati-
cally and a list of possible destinations will be displayed.
List/OK
s34g.6.book Page 8 Thursday, January 14, 2010 8:48 AM
Range selector key SETUP 9
Range selector key SETUP
Sound settings
By pressing the button and pressing on the function key in the RADIO
mode, you can select the following parameters using the menu control button :
• - , ,
and - Volume when switching on, volume of incoming traffic announcements,
volume of navigation announcements and speed dependent volume adaptation;
• - Treble setting;
• - Midtone setting;
• - Bass setting;
• - Setting of the volume ratio between the left and right side;
• - Setting of the volume ratio between the front and the rear;
• * - Setting the equalizer (linear, language, rock, classical, dance);
• * - Setting of the surround tone.
GALA function
Your radio increases automatically its volume with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.
Note
You can set the tone parameters using the menu control button or the function keys
or .
System settings
Press the button and select the function key .
You can select between the following parameters:
• - Menu language for the displays and the language messages;
• - Keypad layout for text entry;
• * - if your vehicle is equipped with climatronic, the setting change
is displayed when it is activated;
• - Setting the brightness of the screen;
• - Factory settings;
• - the information regarding the complete memory capacity of the
SD card and the size of the memory as signed to the navigation data is displayed on the
screen;
• - Removing the SD card.
Setup radio
Press the button in the RADIO mode.
Switching the traffic announcements on or off
– If you wish to switch the reception of traffic reports on or off, press the function key
.
Determining the station selection via the arrow buttons
– By pressing on or , you can select the source from which the
stations are to be selected while in the RADIO mode using the arrow buttons. If
is selected, only stored stations from the preset list are called up using the
arrow buttons during station relay. The symbol “ C ” is displayed on the
screen.
Switching the RDS function on or off (RDS regional)
– Press on the function key (regional station) and select a set-up in the
opening pop-up window.
– Press on the button , doing so always chooses the frequency for the
heard radio station which offers the best reception at the present time.
– When pressing on the button , the unit attempts to hold a radio station emit-
ting regionally long enough until the reception quality is so bad, that there is a risk
of a program loss.
SETUP Sound
A
10
Vol ume Max. switch-on volume Traffic announcements (TP) Navigation volume
SDVA
Tre bl e
Mid-range
Bass
Balance
Fad er
EQ settings
Surround
A
10
+ -
SETUP System
Language
Keypad layout
Air con. displays
Screen
Factory settings
SD card status
Remove SD card
SETUP
Traffic announcements (TP)
Arrow buttons
Station list Presets
Presets
RDS regional
Automatic
Fixed
s34g.6.book Page 9 Thursday, January 14, 2010 8:48 AM
Range selector key SETUP10
Delete stored stations
– Press the function key and confirm the following safety interrogation in order
to delete all radio stations stored in the memory list.
Setup Telephone*
Call up the Setup Telephone menu by pressing the range selector key and the
range selector key .
Entering the voice mailbox number
– If you want to enter the voice mailbox number (this number depends on the type
of the mobile phone network) in a mobile phone, press the function key
. The entry of the voice mailbox number is intended for
listening to the messages left on a mobile phone.
Updating telephone book in the unit
– Press on the function key to update all entries in the unit, the
telephone book of the mobile phone or the SIM card entered since the last connection. This procedure can take a few minutes.
– Confirm the following safety interrogation. The “old” data in the telephone book
can still be selected at the unit while the data is being updated.
Delete call lists
– Press on the function key .
– If you confirm the following safety interrogation by pressing , the stored call
numbers of all calls made and calls accepted in the unit will be deleted.
Deactivating the telephone module
– After pressing the function key the mobile phone
deregisters from the network (this function is only available for the universal telephone preinstallation GSM III).
Factory settings
– Sets the telephone preinstallation to the basic setting.
Note
The selection possibilities of the mobile phone set-up depend on the relevant type of
the universal telephone preinstallation.
Setup traffic programme
Press the range selector key and then the range selector key .
Switching the traffic announcements on or off
A tick in the check box = indicates that the traffic programme function is already
switched on.
Dynamic route
Opens a pop-up window where it is considered if the TMC traffic reports, received
during the route calculation, are to be entered.
Setup Display
Press the button in the RADIO mode and then the function keys and
.
Brightness
– Press the function key and select the desired setting for brightness
(5°stages) in a pop-up window.
– A light sensor, which is located in the top right corner of the front panel, is used for
the automatic correction of the brightness depending on the light condi tions in the
vehicle.
Day/night
– Press on the function key and select a setting in the pop-up window.
– Press the function key if switching the headlights on and off should also
change the map display from night to day design.
– Press on the function key or to manually determine the night and day
design of the map display.
Delete presets
All
PHONE
SETUP
Enter voice mailbox number
Load telephone book
Delete call lists
Delete
Deactivate the telephone module
TMC SETUP
Traffic announcements (TP)
Dynamic route
SETUP System
Screen
Brightness
Day/Night
Automatic
Day Night
s34g.6.book Page 10 Thursday, January 14, 2010 8:48 AM
Loading...