Skoda CAR RADIO BOLERO - FOR SUPERB, CAR RADIO BOLERO User Manual
SIMPLY CLEVER
ŠkodaAuto
CAR RADIO BOLERO
Škoda Auto pursues a policy of constant product and model development. We trust
that you will understand that changes to models in terms of shape, equipment and
engineering, may be introduced at any time. The information about scope of
delivery, appearance, performances, dimensions, weight, fuel consumption,
standards and functions of the vehicle is only correct at the time of publication.
Certain items of equipment might only be installed later on (information given by
the local authorised Škoda Service Partner) and only envisaged for particular
markets. It is therefore not possible for legal claims to be made based on the data,
illustrations and descriptions contained in this Owner's Manual.
Reprinting, reproduction or translation, either in whole or in part, is not permitted
without the written consent of Škoda Auto.
Škoda Auto expressly reserves all rights relating to copyright laws.
We reserve the right to make changes to this document.
Issued by: ŠKODA AUTO a.s.
© ŠKODA AUTO a.s. 2009
Bolero.indd 2Bolero.indd 2 26.3.2009 14:29:1026.3.2009 14:29:10
Contents 1
Contents
General information . . . . . . . . . . . . . . . . .
Equipment overview . . . . . . . . . . . . . . . . . . . . . . . . . .
Important information . . . . . . . . . . . . . . . . . . . . . . . .
Anti-theft protection . . . . . . . . . . . . . . . . . . . . . . . . . .
General operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the system on and off . . . . . . . . . . . . . .
Basic setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RADIO selector key . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selector key MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selector key SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selector key PHONE . . . . . . . . . . . . . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
2
2
3
4
5
6
6
6
9
13
16
21
s1ok.1a.book Page 1 Monday, March 30, 2009 3:29 PM
General information2
General information
Equipment overview
Switching on/off: Rotary/push knob for switching the navigation
system on/off (press) and volume control (turn)
Selector key for selecting the corresponding menu:
− – changes over into radio mode and changes the
frequency range when in the radio mode.
− – changes over to the last played media source or selects
a new media source.
− – Phone function – Muting of the current audio source.
− – TIM function (Traffic Information Memory) recorded traffic
announcements can be replayed. After entering up to two
different TIM recording times in SETUP menu, a recording of the
traffic announcements is also possible if the unit is switched off.
− – Switch the traffic information function (Traffic Program) on
or off or interrupt the currently received traffic announcement.
− – enables setting-up the individual fields.
and : The backwards/forwards keys operate the “active” audio
source.
− RADIO-Mode – for the selection of the stations from the memory
list.
− MEDIA-Mode – for the selection of the previous or following
track.
CD-case
Touchscreen (Touch-screen): Fields circled in colour on the display
are presently “active” and are operated by touching the display.
Eject key – press briefly to move an inserted CD into the posi-
tion ready for removal.
– opens the sound and volume settings menu.
Setting up button
− RADIO mode – turn for manual station adjustment; press briefly
to start or stop the automatic play (Scan).
− MEDIA mode – turn to change track; press briefly to start or stop
the automatic play (Scan).
Memory card case: SD memory cards (“Secure Digital Memory
Cards”), SDHC (“Secure Digital High Capacity Card”) and MMC
(“Multimedia Cards”) measuring 32 mm x 24 mm x 2.1 mm and with
a capacity of up to 32 GB are available. The case for the memory card
is located under the display.
Explanation of symbols
* items of equipment which are marked in such a way are only installed as standard
on certain models or are supplied as special equipment.
End of a section.
The section is continued on the next page.
Note
This Owner's Manual describes the range of functions at the time of going to press.
The illustrations can differ in minor details from the version of your unit.
Important information
Warran ty
The equipment warranty terms and conditions also apply for new vehicles.
After the expiration of the warranty, a piece of equipment in need of repair will be
replaced with a reconditioned, original item with spare part warranty. It is, however,
a precondition that the housing has not been damaged and no unauthorised
attempts have been made to carry out repairs.
A1A
2
RADIO
MEDIA
PHONE
TIM
TP
SETUP
A
3
A
4
A
5
A
6 /
A
7
A
8
A
9
s1ok.1a.book Page 2 Monday, March 30, 2009 3:29 PM
General information 3
Note
Damage within the meaning of the warranty must not be the result of improper
handling of the system or from unprofessional repair attempts. It is also essential
that there is no external damage.
Operation
The radio should only be used, if the traffic situation permits it.
The volume settings must be selected in such a way that audible signals from the
outside, e.g. a Martins horn from utility vehicles (police cars, ambulances and fire
brigade), can be heard at all times.
WARNING
Please concentrate fully at all times on your driving! As the driver you are
fully responsible for road safety. Only use the functions of the radio in such
a way that you are always in full control of your vehicle in all traffic situations!
Caution
• Inserting a second CD while a CD is being ejected can destroy the CD drive in
the unit. Please note that the CD ejection lasts a few seconds after pressing the
Eject key . During this time the lock in front of the CD case is open. It is essen-
tial that you wait until the CD has been fully ejected before you try to insert a new
CD.
• Press the buttons and the keys of the unit gently in order to avoid damaging
them. Gentle pressure on the appropriate key is sufficient to operate the unit.
Please note that the rotary/push knobs have predetermined breaking points, in
order to reduce the risk of injury.
• Do not use any pointed or sharp-edged objects to operate the touch-screen.
Slight finger pressure sufficient to operate the equipment. A text in the display,
which cannot be called up by pressing the button, is therefore not available at that
time.
Care of the display
Carefully handle the display because dents and scratches can occur through pressure of the finger or contact with sharp objects.
The display can be cleaned with a soft cloth and finger marks can be wiped away
with pure alcohol.
Note
Do not use solvent such as turpentine or petrol as they will corrode the display
surface.
Anti-theft protection
Anti-theft coding
Your radio is equipped with a convenience coding. If the radio is being operated for
the first time, the safety code is not only stored in the radio but also in the vehicle.
After disconnecting and reconnecting the battery, first of all switch on the ignition
and then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered.
In this case, please do not hesitate to contact a Škoda Service Partner or a Škoda
importer.
As the unit only functions after entering the safety code, this practically excludes its
use after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cluster. This ensures that it is automatically
decoded (convenience coding). Manual input of the code is normally not
necessary.
/
s1ok.1a.book Page 3 Monday, March 30, 2009 3:29 PM
General information4
Enter code
– If a keypad appears after switching on with the command to enter the
code, the unit can be unlocked by entering the correct four-digit code
number. The number of the possible attempts is shown in the second
display line.
– Press directly a digit from to on the digit block displayed on the
display. The digit is accepted in the entry line.
– After a four-digit order has been entered, the group of digits will turn
grey (inactive) and no further digits can be accepted in the entry line.
– Press on the display to erase the digits in the entry line from right
to left and thereby correct your input, if necessary.
– If the correct code number is displayed in the entry line, press .
Code number
The code number can only be called up “online” via the Škoda system, as this guarantees even more effective anti-theft protection. Please contact your Škoda dealer
if necessary.
Incorrect code number
If an incorrect code is confirmed after input, the procedure can be repeated one
more time. The number of attempts is shown in the second display line.
If the code number is entered incorrectly for the second time, the unit will be
blocked for approx. one hour. The safety code can only be entered again after one
hour has expired, with the unit switched on and the ignition key in the ignition lock.
If two invalid attempts are then made again, the navigation system will be blocked
again for an hour.
The cycle - two attempts, blocked for an hour - will continue to apply.
Note
The code is normally stored in the instrument cluster. This ensures that it is automatically decoded (convenience coding). Manual input of the code is normally not
necessary.
General operation
“Scrollbar”
The vertical bar on the right side of the display with a sliding regulator between the
arrow keys and is called a “scroll bar”. It indicates that further menu entries
become visible if the sliding regulator is moved completely to the bottom.
Display set-ups
In a set-up menu a set-up or value is infinitely adjustable. Move the sliding regulator or press or to change a setting. Press the function key , to take
over a changed setting and to switch back to the initial menu.
“Pop-up window”
A function key with an arrow behind another function key shows the presently
selected set-up, e.g. with an .
If you press on the function key on the display, a so-called “pop-up window”
will open where all the set-up options are displayed.
Briefly press the desired set-up option. The pop-up window is closed and the
setting you have selected is displayed. To close the pop-up window without
changing the set-up, press the function button in the pop-up window .
“Check-box”
There is a so-called “check box” in front of a function which can only be switched
on or off. A tick in the check-box indicates that the function is switched on, an
empty check-box , indicates that it is switched off.
Briefly press the corresponding function key for switching on and off.
0 9
OK
+ -
Confirmation tone Off
Off
s1ok.1a.book Page 4 Monday, March 30, 2009 3:29 PM
General information 5
Switching the system on and off
– The system is switched on or off by turning / pressing the rotary / push
knob .
The last active audio source before switching off will be repeated.
If the key is pulled out of the ignition lock with the unit switched on, the unit wil
switch off automatically.
You can then switch the unit on again. If the engine is switched off, the system
(vehicle battery protection against discharging) switches off automatically after
approx. one hour. This process can be repeated as often as necessary.
A
1
s1ok.1a.book Page 5 Monday, March 30, 2009 3:29 PM
Basic setting6
Basic setting
Sound settings
By pressing the button you can select the following parameters:
• - Setting of height, middle and depth;
• - Volume ratio (left and right = balance), (front and rear = fader);
• - , and * - Switch on
volume, traffic announcements and volume of park distance control signal;
• - Speed dependent volume adaptation
•
Volume decrease for park distance control (PDC) *
If your vehicle is equipped with “parking aid”, the volume is automatically
decreased to a pre-defined value, when the “parking aid” is active.
GALA function
Your radio increases automatically its volume with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.
RADIO selector key
Selecting a radio station
Call up main menu RADIO and choose frequency range
– Press the selector key to call up the main RADIO menu. The
currently heard radio station is indicated at the top of the display.
– To change the frequency range, press the function key and on
or in the opening pop-up window. The current frequency
range is indicated at the top left of the display.
Changing a radio station
– When briefly pressing the arrow keys on the unit or the arrow keys
on the display of the main menu RADIO, you change to the previous
or following station.
Selecting a radio station from the station list
– Press the function key to display all radio stations that can
currently be received. The list “skips” directly to the display of the
currently heard radio station.
– Choose the desired station by pressing the respective selection. After
about 20 seconds without operation the image of the station list will
close automatically.
Function keys in the radio main menu
to – Station keys for storing or calling up a stored radio station. The station
keys to be displayed are determined in the menu Setup Radio.
– Button for selecting the desired frequency range.
– opens the list of the presently receivable radio station.
– opens the list of the stored radio station.
– Button for calling up the automatic play or for inserting radio text.
– opens the frequency band of the selected frequency range.
Searching and storing radio stations
Manual search
– Turn the Set button in the main menu RADIO or press the function
key . The scale of the selected frequency range is inserted in the
frequency band in the lower part of the display.
Tone setups
Balance Fader
Volu me Startup volume Traffic announcements PDC
GALA
Confirmation tone
RADIO
Band
FM AM
A
3
Station list
1... ...42
Band
Station list
Memory
Extras Scan
Man.
A
8
Man.
s1ok.1a.book Page 6 Monday, March 30, 2009 3:29 PM
Loading...