
Contents 1
Contents
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radio - Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important information . . . . . . . . . . . . . . . . . . . . . . . .
Anti-theft protection . . . . . . . . . . . . . . . . . . . . . . . . .
Basic setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
s5is.16.book Page 1 Monday, April 18, 2011 1:16 PM

Radio2
Radio
Radio - Overview
Rotary/push knob
− switching on and off (pressing)
− Volume control (rotate)
− other function settings in various menus
Rocker switch to call up the menu settings of the parameter for radio or
CD player
Rocker switch for adjusting the sound
Rocker switch to automatically store the station
Rocker switch to activate the AM radio mode
− fast search in the respective waveband
− Scroll through the contents of the CD
CD - eject button
CD-case
Button to activate the CD mode
Rocker switch to activate the reception of traffic reports
Rocker switch to switch over between the wavebands AM/FM
Rocker switches ,
− manual station finding, fast station finding
− Select the track in the CD mode, fast forward/backward search in the CD
mode
− Selecting the menu points
Display
Station keys -
− store and select the RDS station
− CD selection
− Enter code
Characters in the text
* Parts of the equipment which are marked in such a way are only installed as
standard on certain models or are available as special equipment.
End of the paragraph.
The paragraph continues on the following page.
Important information
Warranty
The equipment warranty terms and conditions also apply for new vehicles.
After the expiration of the warranty, a piece of equipment in need of repair will be
replaced with a reconditioned, original item with spare part warranty. It is, however,
a precondition that the housing has not been damaged and no unauthorised
attempts have been made to carry out repairs.
Damage within the meaning of the warranty must not be the result of improper
handling of the system or from unprofessional repair attempts. It is also essential
that there is no external damage.
Operation of radio
The radio should only be used, if the traffic situation permits it.
The volume settings must be selected in such a way that audible signals from the
outside, e.g. a Martins horn from utility vehicles (police cars, ambulances and fire
brigade), can be heard at all times.
Power output
4x20 W
Please concentrate fully at all times on your driving! As the driver you are fully
responsible for road safety. Only use the functions of the radio in such a way
that you are always in full control of your vehicle in all traffic situations!
Using the display
Carefully handle the display because dents and scratches can occur through pressure of the finger or contact with sharp objects.
s5is.16.book Page 2 Monday, April 18, 2011 1:16 PM

Radio 3
The display can be cleaned with a soft cloth and finger marks can be wiped away
with pure alcohol.
Do not use solvent such as turpentine or petrol as they will corrode the display
surface.
Anti-theft protection
Anti-theft coding
Your radio is equipped with a convenience coding. If the radio is being operated for
the first time, the safety code is not only stored in the radio but also in the vehicle.
After disconnecting and reconnecting the battery, first of all switch on the ignition
and then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered.
In this case, please do not hesitate to contact a Škoda Service Partner or a Škoda
importer.
As the unit only functions after entering the safety code, this practically excludes its
use after a theft - a contribution to increased anti-theft safety.
The code is stored in the instrument cluster. This ensures that it is automatically
decoded (convenience coding). Manual input of the code is normally not
necessary.
Enter code
– Switch on the radio if the ignition is on. SAFE is displayed and then 1000.
– Enter the safety code using the station keys - .
– Confirm the safety code by pressing the station key .
If you have confirmed a wrongly entered code, you can repeat once again the entire
process.
If the code number is entered incorrectly for the second time, the unit will be
blocked for approx. one hour. It is possible to enter again the safety code after one
hour has expired, when the unit and the ignition have been switched on.
The cycle - two attempts, blocked for an hour - will continue to apply.
Basic setting
Switching the unit on and off
– The system is switched on or off by turning / pressing the rotary / push knob .
If the key is pulled out of the ignition lock with the unit switched on, the unit wil
switch off automatically. You can switch on again the unit by pressing the
rotary/push knob . When the ignition is switched off, the unit switches off automatically after approx. one hour (discharge protection of the vehicle battery).
If you have switched off the radio by withdrawing the ignition key, the radio
switches on again once the ignition is on.
Audio settings
– Press the rocker switch repeatedly to select the desired parameter.
– Set the desired value by turning the rotary/push knob .
You can select between the following parameters:
• TRE - Treble setting;
• BASS - bass setting;
• BAL - setting of the volume ratio between the left and the right side;
• FAD - setting of the volume ratio between the front and the rear;
Setting the special functions
– Press the rocker switch , in order to activate the menu Set-up.
– Individual functions of the menu are selected by pressing the rocker switch
or by pressing the rocker switches , .
– Set the desired value by turning the button .
s5is.16.book Page 3 Monday, April 18, 2011 1:16 PM