Page 1
B25
使用说明书
U s e r m a n u e l
正确佩戴方式
1. 手环以尺骨茎突后佩戴最佳
2. 根据调节孔调好适合手腕的大小，扣上腕带扣；
3. 传感器要紧贴皮肤，避免移动。
正确拆卸方式
右手拇指按住触摸屏处 两只手如图握住手环，左手
1
2
食指往上用力顶，左边的屏
幕会翘起来。
3
屏幕被顶出，就可以直接把
机身拿出来。
充电方式 手环操作
初次使用确保手环电量正常,若低电不能正常开机,请连接充电器对
设备进行充电,手环会自动开机。
手环主体区域
插入USB接口充电
USB 充电接口
1. 设备开 机 状态下，短按 触摸键 可点亮屏 幕;
2. 手环默认时钟页面,短按触摸键可切换查看不同页面,
无操作默认8秒 息屏；
3. 切换到心率和血压界面自动开始测试，测试结束大概40S
左右息屏。
在手机上安装手环APP
表扣
触摸键
将取出的手环主机直接插USB接口
充电器充电即可。
1、扫描下图二维码下载“RaceFit Pro ”APP即可，并注册账号。
(APP兼容蓝牙4.0、安卓4.0、IOS10.3以上系统的智能手机）
如何开/关机
1. 在设备关机状态下,长按触摸键4秒以上可使设备震动并开机；
2. 在设备开机状态下, 进入关机界面“ ”长按触摸键4秒以上
可使设备震动并关机。
2、长按手环触摸按键5秒开机后，打开手机蓝牙，第一次进入
“RaceFit Pro”,将自动引导您绑定手环。
RaceFit Pro
连接设备
1、打 开 APP第一次 打开 会提示 用户打 开需 要开启 的权 限，请全部同意 ,同 时
打开 手机蓝 牙功能 ;
2、点 击手 机AP P屏幕右下角“我 的 ”菜 单图标 出现 菜单功 能列表 , 点击 我的
设备 进行手 动连 接“B2 5”。
3、连 接成功后,APP会自动保存手环蓝牙地址,APP打 开 或 在 后 台 运 行 ，都 会
自动 搜索并连接 手环;
4、安卓手机请确保在安装时或手机系统设置中赋予 APP后台运行和读取联系
人信息等所 有权限。
APP功能及设定
个人 资 料
进入APP后请先设定个人信息；我的→个人资料，可设置性别-年龄- 身高-体重；
目标设置
我的→目标设置：可以设置您的每日计步、卡路里、里程目标数，监控每日的
完成情况；
手环显示说明
主界面 计步 卡路里
里程
心率 血压
血氧
闹钟 开关机睡眠
相机 找手机
主界面
与手机同步后 手环会自动校准时间,主界面长按4S,
可以 更换 不同主界 面；
计步
佩戴 手环 记录 每天 运动步 数 ，可查看 当前 实时 步数；
里程
根据行走步数 估 算运动里程；
卡路里
根据 行走步 数 估算消 耗的卡 路里 ；
心率
切换 到 心 率 、血 压、血 氧 界 面 后 会 自 动 测 试，等 待 数 秒 后 显 示 当前心率、
血压、血氧的测试结果。为了保证测试数据准确，进入测量模式后，请保
持测 量时放松、静止，测量时也请不要说话。
血压 血氧
睡眠模式
入睡时 手环会自动进入睡眠监测模式 自动检测您整晚深睡/浅睡/清醒
次数,计算您的睡眠质量，睡眠数据暂时只支持APP端查看。
智能闹钟
连接 状态下 可 进行5 个闹 钟的设 置，设 置后会 同步 给手环 ;支 持离线
闹钟 在 同步 成功后 即使APP未连 接 手环也会 按设定 时间提 醒。
摇一摇拍照
连接状态下 APP进入“摇一摇拍照”界面,摇一摇手环 倒计时3秒后
自动拍照，请允许APP访问相册以保存自拍的照片。
寻找手机
长按查找手机界面4 秒进入查找手机，查找时显示动态图标，蓝牙连接
状态下，被连接的手机响起提示音；
信息
此界面长按4秒以上可以查看最近推送的信息内容;
开关机
此界面长按触摸键4秒以上可使设备震动并关机。
久坐提醒
设置是否开启久坐提醒功能 您可在个人资料中设置提醒时间间隔若
在设定时间内长时间坐着则手环会提醒。
关于手环
显示手环蓝牙地址和手环 软件版本信息;
手环显示设置
您可在此选项中设置手环端功能按键切换的画面 打开的页面会在按下
功能按键后依次切换 而关闭的功能则不会在切换中出现。
消息提醒
来电提醒
连接 状态下，如果开启了来电提醒功能，当来电时,手环上会震动，
并显示来电的姓名或号码。（需赋予APP读取通讯录权限）
短信提醒
连接状态下，如果开启了短信提醒功能，当有短信时手环上会震动并显示
短信内容。
其他提醒
连接状态下，如果开启了此功能，则当有微信、QQ,Facebook等 消息时，
手环会震动提醒并显示内容。（ 需 赋 予 APP获 取系 统通 知的 权限）
Android用户温馨提示:
使用提醒功能时需要设置为允许"RaceFit Pro "后 台运 行， 建 议在权限管
理中添加"RaceFit Pro " 为 信 任 ( 主 要 是 在 省 电 管 理 ，受 保 护 应 用 ，白 名 单
里面对"RaceFit Pro "进行设置),并打开所有权限。
注意 : 佩戴手环入睡 才会有 睡眠 数据, 且在 第二 天9 点以后才会同步到
APP中。（数据 仅供参 考，不 可用于医疗 用途 ）
基本参数
设 备 类 型 ： 智 能 手 环 电池类型： 锂聚合物80mAh
振 动 马 达 ： 支 持
防 水 等 级 ： I P 6 7 显示屏： IPS彩色高清
系统要求：An driod 4.4及以上、IOS 8.0及以上版本且支持蓝牙4.0以
上的手机
同步方式：蓝牙4.0
传感器：光电式心率传感器工作温度：- 10℃~50℃
部件介绍
主 机 / 腕 带 / 包 装 盒 / 说 明 书
注意事项
1.洗澡和游泳时不宜佩戴；
2.同步数据时请链接手环；
3.不要把手环长时间暴露在水分较高、温度极高或极低的地方；
4.充电要求：使用规格为5V 0.5-2A的充电器充电，长期不使用时，
请务必关机并保证每2个月补充电1次
Page 2
CORRECT WEARING METHOD
1.Wear it after the ulnar styloid is best;
2.Adjust the adjustment hole which suit for your wrist,
fast en the buckle；
3.S ensor s hould be close to the ski n to avoid moving.
CORRECT DISASSEMBLY
Press the touch screen
1
with the right thumb
Hold the bracelet with both
2 3
hands as shown in the picture.
The index finger on the left hand
push it up, and the screen on the
left will tilt up
When the screen is pushed
out, you can take the body out
directly.
CHARGE WAY
Make sure that the battery have power in first time use.If less power to
turned on,please connect the charger tocharge the device,the bracelet
will turn on automatically.
Bracelet main body area
Buckle
Insert USB port to charge
USB ch arge po rt
Touch k ey
Enter the bracelet host
to USB port charger
(computer \ power bank)
can be charge directly
TURN ON/OFF
1.When device off,press the touch button for more than 4 s,
dev ice will vibrate and turn on；
2.When device on, fi nd the shutdown interface" " then press the tou ch
button for more tha n 4s,devi ce will vibrate and turn off. touch button to
switch different pages,without operation 3s screen off;
3.Switch to the heart rate and blood pressure page,it will start test
automatically,when it finished screen off after 40S；
BRACELET OPERATION
1. Device on,press the touch button to light up the screen ;
2. Acquiescence clock is the first page,press the touch button to switch different
pages, without operation 8s screen off ;
3. S witch to the hea rt rate a nd bloo d press ure pag e, it wi ll start test
automatically,when it finished screen off after 40s.
DOWNLOAD APP ON MOBILE PHONE
Sca n a QR code to d ownlo ad APP" RaceFit Pro" an d create y our
1、
account. (APP support to Bluetooth 4.0, Android 4.4, IOS 10.3 smart
phone systerms)
RaceFit Pro
2、
Long press 5 seconds to turn on the device, open the Bluetooth of the
phone, and enter the "Day Health " APP for the first time, which will
automatically guide you to bind the bracelet .
CONNECTING DEVICE
The first time you open the APP will prompt the user required open
1、
permissions, please agree all and turn on the Bluetooth function of
mobile phone.
Click the “My” menu icon in the lower right corner of the cell phone app
2、
to display the menu function list, click on my device to manually
connect to"B25".
After the connection is successful, the APP will automatically save the
3、
Bluetooth address of the bracelet, and if the APP is opened or running in
the background, it will automatically search and connect the bracelet;
For Android phones, please make sure to set the APP permissions during
4、
installation or on the phone system setting to give the APP all permissions
to run in the background and read contact information.
APP FUNCTION AND SETTING
Personal information
Set personal information when y ou login: My data-personal
data, gender-age-height- weight.
Target setting
My data-Target setting,Also can set daily sport andsleeping
target, Monitor daily completion Please set ti me for sedentary
rem inder, o r you can t urn it off i n the message alert.
BRACELET DISPLAY INSTRUCTION
Main
interface
Blood
oxygen
Pedometer Calorie
Distance
Alarm clock Turn off/onSleep
Camera
Heart rate
Find the
phone
Blood
pressure
Main interface
After sync with phone,bracelet will adjust the time automatically,Press
the main interface for 4 seconds, differen t main interfaces ca n be
re placed.
Pedometer
Wear the bracelet to record the number of daily movement steps, you can
view the real-time steps.
Mileage
Estimate the mileage based on the number of steps
Calorie
Estimate the calories burned based on the number of steps
Heart
rate
Blood
pressure
Blood
oxygen
It will automatically test when switching to heart rate,blood pressure or blood
oxygen, waiting for a few seconds, the current heart rate, blood pressure,
or blood oxygen test results will be displayed. When entering the measurement
mode, please keep relaxed and still, and do not speak to ensure the accuracy of
the te st data .
Sleep mode
When you fall a sleep, the bracelet wil l ent er the sleep monitoring
mode automatically; detect your Awake /Light sleep / Deep sleep,
calculate y our sleep quality;sleep d ata o nly supports A PP
side view.
Note: Sleep data will only be available when yo u wear the bracelet
to sleep, a nd will be synced to the app after 9:00am the next day.
Smart alarm clock
5 alarms can be set when connected and configured, it will be
synchronized to the bracelet. Support offline alarm clock. After the
successful configuration, it will remind you on time even if the app is not
connected to the bracelet.
Shake and take picture
Keep connected,enter the sha king pho to interface,shake
the bracelet,take a pho to auto matically after 3 sec onds of
Search mobile
At this interface and press it for 4 seconds to start searching
mobile;in Bluetooth connection,the connected mobile will
give out prompt sounds;
counting down. P lease all ow the
APP to access the album to save t he self-portrait photos.
Information view
Press the interface for 4seconds, You can see the content of the
recently received information.
Powe r On & Off
Press and hold the touch button for more than 4 seconds to make the
device vibrate and shut down.
Sedentary reminder
Set t urn on/o ff sedentary reminder f unction.You can set the
reminder interval in the profile .If you sit for a long time in the
set t ime.the bracelet will remind you.
About the bracelet
Display Bluetooth address and software version information.
Bracelet display settings
In this option，you can set the screen for the switch of the bracelet function
button. The opened page will be switched after pressing the function button,
and the closed function will not appear in the switch.
MESSAGE REMIND
Call remind
Keep connected, if the call alert func tion is enabled,the wri stband will
vibrate and display the name or n umber of the c aller when the callcome
in. (You need to give APP read address book permission)
Message remind
Keep connected, if the SMS reminder function is enab led,
the bracelet will vibrate when message come in.
Other remind
Keep connected,if this functio n is enabled,the bracelet will vibrate when
there is a message ,such as WeChat, QQ.Facebook. etc.(You need to give the
APP permission to get system notifications)
Android user Tips:
When using the reminder function,you need to set it to allow "RaceFit Pro " t o
run in the background;recommended to add "RaceFit Pro" to the rights
management and turn on all permissions
SPECIFICATION
Device type:Smart bracelet
Vibrate motor:support
Work temperature:-10℃~50℃
Battery type :Li- polymer 80mAh
Sync way:Bluetooth 4.0
Sensor: a photoelectric heart
rate sentor
Waterproof: IP67 Screen：IPS high-definition colorful
Device Requirement: above IOS 8.0/Android 4.4,above Bluetooth 4.0
COMPONENT INTRODUCTION
* Host * Wrist strap * Charging cable ** Packing box and manual*
TIPS
1. Not suitable for bathing and swimming;
2. Please connect the bracelet when synchronizing data;
3. Do not expose the handl e ring to a place with h igh moistur e,
high temperature or ver y low t emperature for a long time;
4. Ch arging requirements: Charge the char ger with t he
specification o f 5V 0.2-2A. I f it is n ot used f or a long ti me,
please t urn it off and ens ure that it is recharged every two months.
Loading...