User Manual
Skiva PowerSkin Note3 4600 mAh
Battery Case
AP112
Document Revision No.: 1.0
The Skiva PowerSkin Note3 is designed to provide backup power to
your Samsung® mobile device. Compatible with Samsung Galaxy
Note3, the PowerSkin Note3 makes a smart addition to your travel
electronics.
www.skivatech.com
Skiva PowerSkin Note3 4600 mAh
Battery Case
2
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed.
Overview:
Explore the PowerSkin Note3:
Safety information:
It is important that you read the following safety information prior to
using your Skiva PowerSkin Note3.
• To charge your PowerSkin Note3, use the manufacturer’s USB
charger. Using alternate chargers may damage the device.
• Do not attempt to charge the Note3 with a defective charger.
• Keep the PowerSkin Note3 away from water, re, extreme cold
or extreme heat.
• Do not use excessive force when applying the case to your
mobile device.
Getting started:
1) Pull the top of the charging case open.
2) Slide the mobile device into place.
3) Push the top of the charging case closed.
www.skivatech.com
Skiva PowerSkin Note3 4600 mAh
Battery Case
3
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed.
Charging:
1) Connect the PowerSkin Note3 to your computer with the USB
connector provided. When connected properly, the LED lamp will
illuminate.
2) Observe the charging progress in the capacity indicator. The
capacity indicator light will turn green when charging is complete.
www.skivatech.com
Skiva PowerSkin Note3 4600 mAh
Battery Case
4
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed.
TIP: When charging both the PowerSkin Note3 and the mobile device at
the same time, toggle the ON/OFF switch on the PowerSkin Note3 to
control which device charges rst. When LED1 is illuminated, the mobile
device is charging rst.
Charging status:
Capacity LED1 LED2 LED3 LED4
Less than 25% Flashing O O O
25%-50% On Flashing O O
50% -75% On On Flashing O
75%-100% On On On Flashing
Charging the PowerSkin Note3
Capacity LED1 LED2 LED3 LED4
Less than 25% Flashing O O O
25%-50% On Flashing O O
50% -75% On On Flashing O
75%-100% On On On Flashing
Charging the mobile device
3) Disconnect the PowerSkin Note3 from your computer after the
case is fully charged. Leaving the device connected after the
battery is fully charged might reduce the battery’s capacity in
future charges.
www.skivatech.com
Skiva PowerSkin Note3 4600 mAh
Battery Case
5
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed.
Specications:
Product name Skiva PowerSkin Note3
Model AP112
Battery Capacity 4600mAh
Input DC 5V
Dimension 80*160*17(mm)
Charging Time 11 hours
Care and maintenance:
• Keep the case dry. If the case does get wet, dry it completely.
• Do not use the case in wet or dusty conditions.
• Do not store the case in wet or dusty conditions.
• Do not store the case in extreme hot or cold conditions.
• Do not drop, knock or shake the case.
• Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the case.
• Do not decorate the case.
• If the case does not appear to be functioning correctly, take it to
your nearest authorized service dealer.
Capacity LED1 LED2 LED3 LED4
Less than 25% On O O O
25%-50% On On O O
50% -75% On On On O
75%-100% On On On On
Not charging
www.skivatech.com
Skiva PowerSkin Note3 4600 mAh
Battery Case
6
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed.
For support please contact us
at support@skivatech.com
Loading...