Skiva AP103 User Manual

Page 1
User Manual
Skiva PowerVault Lightning A2600
Battery Pack
AP103
Document Revision No.: 1.0
Page 2
Thanks for choosing PowerVault Lightning A2600. It supports charging iPhone 5 and other lightning and microUSB port based devices. It has integrated lightning and micro USB connector as well as male USB-A connector which allow cable free operation of this power pack.
www.skivatech.com
Skiva PowerVault Lightning A2600
Battery Pack
2
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
Introduction:
Page 3
Usage Guide:
1. To charge power pack please plug the male USB connector to charging device e.g. Laptop, Computer USB charger etc. You can provided adapter when it is not convenient to plug the device directly to a USB port.
www.skivatech.com
Skiva PowerVault Lightning A2600
Battery Pack
3
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
2. iPhone 5 or other lightning port based devices can be charged by
rst pulling out top part, and then plugging in the lightning male
connector to female lightning port of phone/tablet. Now press power on button and charging will start.
Page 4
www.skivatech.com
Skiva PowerVault Lightning A2600
Battery Pack
4
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
3. Smartphones and other micro USB based devices can be charged by
rst pulling out tail part and and then plugging the male micro USB
connector to female port of the smartphone or other device. Now press power on button and charging will start.
Page 5
www.skivatech.com
Skiva PowerVault Lightning A2600
Battery Pack
5
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
Cables disassembling:
Please pull out the lightning/micro-USB cables using your ngernail.
4. To check capacity of power pack, press the power button. Now LEDs will turn on. Each LED corresponds to 25% capacity of the battery. If
only one LED is ashing it means that charge is under 10% of
capacity and power pack should be charged as soon as possible.
LED-1 Blinking: 0-10% LED-1 On: 10-25% LED-2 On: 25-50% LED-3 On: 50-75% LED-4 On: 75-100%
Page 6
www.skivatech.com
Skiva PowerVault Lightning A2600
Battery Pack
6
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
Specications:
Product name Skiva PowerVault Lightning A2600
Battery Pack
Model AP103
Capacity 2600 mAh / 3.7V
Input DC 5V / 1A
Output DC 5V/2A (5V/1A & 5V/1A)
Dimension 99*33*22(mm)
Weight 82g
Page 7
www.skivatech.com
Skiva PowerVault Lightning A2600
Battery Pack
7
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
For support please contact us
at support@skivatech.com
Care and maintenance:
1. Please do not strike the product with any blunt or sharp article.
2. Please only use a charger with output 5.0V-5.5V to charge battery pack.
3. Do not short circuit the output.
4. Never put this product in water or near re or very high temperature
or very low temperature.
5. Never let children play with this product.
6. Please do not disassemble this product as it may cause safety problems.
7. This product may loose charge when not used for long time. Please once in every three months to maintain normal battery life.
8. This product has built in lithium polymer batteries, please follow your local regulations when disposing this product.
Page 8
www.skivatech.com
Skiva PowerVault Lightning A2600
Battery Pack
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
Loading...