Skil Masters 7314,Masters F0157314 Series Instructions Manual
ORBITAL SANDER
7314 (F0157314..)
SKIL Europe BV - Konijnenberg 60 07/08 2610398483
4825 BD Breda - The Netherlands
www.skileurope.com
www.skileurope.com
ORIGINAL INSTRUCTIONS . . . . . . . . . . . . . 5
NOTICE ORIGINALE . . . . . . . . . . . . . . . . . . 7
ORIGINALBETRIEBSANLEITUNG . . . . . .
10
ORIGINELE GEBRUIKSAANWIJZING. . . . 13
BRUKSANVISNING I ORIGINAL . . . . . . . . 17
ORIGINAL BRUGSANVISNING . . . . . . . . . 19
ORIGINAL DRIFTSINSTRUKS. . . . . . . . . .
22
ALKUPERÄISET OHJEET . . . . . . . . . . . . . 25
MANUAL ORIGINAL. . . . . . . . . . . . . . . . . . 27
MANUAL ORIGINAL. . . . . . . . . . . . . . . . . . 31
ISTRUZIONI ORIGINALI . . . . . . . . . . . . . . 34
EREDETI HASZNÁLATI UTASÍTÁS. . . . . . 37
PÒVODNÍM NÁVODEM K POUÎÍVÁNÍ . . . 40
OR‹J‹NAL ‹fiLETME TAL‹MATI . . . . . . . . . 43
INSTRUKCJÑ ORYGINALNÑ. . . . . . . . . . . 45
ОДЛИННИК РУКОВОДСТВА
ПО ЭКСПЛУАТАЦИИ . . . . . . . . . . . . . . . .
49
ОРИГІНАЛЬНА ІНСТРУКЦІЯ
З ЕКСПЛУАТАЦІЇ . . . . . . . . . . . . . . . . . . .
52
ΠΡΩΤΟΤΥΠΟ Ο∆ΗΓΙΩΝ ΧΡΗΣΗΣ . . . . . . 56
INSTRUCØIUNI DE FOLOSIRE
ORIGINALE . . . . . . . . . . . . . . . . . . . . . . . .
59
ОРИГИНАЛНО РЪКОВОДСТВО
ЗА ЕКСПЛОАТАЦИЯ . . . . . . . . . . . . . . . .
62
PÔVODN¯ NÁVOD NA POUÎITIE. . . . . . . 66
ORIGINALNE UPUTE ZA RAD . . . . . . . . . 69
ORIGINALNO UPUTSTVO ZA RAD. . . . . . 71
IZVIRNA NAVODILA. . . . . . . . . . . . . . . . . . 74
ALGUPÄRANE KASUTUSJUHEND. . . . . . 77
ORI˛INÅLÅ LIETO·ANAS PAMÅC±BA . . . 80
ORIGINALI INSTRUKCIJA . . . . . . . . . . . . . 83
GB
F
D
NL
S
DK
N
FIN
E
P
I
H
CZ
TR
PL
ME77
RU
UA
GR
RO
BG
SK
HR
SRB
SLO
EST
LV
LT
2
A
B
C
D
F
G
E
1
2
7314
3
Watt
250
1,3 kg
EPTA 01/2003
115x140mm
29000
p/
min
ø
1,5
mm
115x107mm
RUBBER
3
A
B
4
4
E
6
C
D
5
8
7
5
GB
Orbital sander 7314
INTRODUCTION
• This tool is intended for dry sanding and fi nishing of
wood, painted surfaces, plastic and fi ller
• Read and save this instruction manual 3
TECHNICAL SPECIFICATIONS 1
TOOL ELEMENTS 2
A Lever for changing sanding sheet
B Paper punch
C Dust canister
D Micro-fi lter
E Vacuum cleaner adapter
F On/off switch
G Ventilation slots
SAFETY
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future
reference. The term “power tool” in the warnings refers to
your mains-operated (corded) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use an earth leakage circuit breaker.
Use of an earth leakage circuit breaker reduces the risk
of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power
source, picking up or carrying the tool. Carrying
power tools with your fi nger on the switch or energising
power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
Loading...