Coder MC BASIC 400
Manual
Manual and operational description Coder MC BASIC 400
Version April 2004
SKIDATA AG
Technical Documentation
Untersbergstrasse 40
A-5083 Gartenau
Telephone +43 6246 888 - 0
Telefax +43 6246 888 - 7
Internet http://www.skidata.com
e-mail docu@skidata.com
Copyright
© 2004 by SKIDATA AG. All rights reserved. All information in the
following document is protected by copyright law. No part of this
document may be reproduced without the written consent of SKIDATA AG. SKIDATA AG reserves the right to make any changes
of specification and other information in this document without
further notice.
Please note
During the compilation of this Technical Documentation, great
care has been taken to ensure the accuracy of the information
contained in it. However, despite our constant effort to ensure the
highest degree of accuracy and comprehensiveness possible,
the information provided cannot be guaranteed to be absolutely
error-free.
Trademarks
This documentation may contain representations of registered
product or service trademarks owned by SKIDATA AG or third
parties, as well as references to proprietary know-how protected
by copyright laws or other legal provisions. In any case the intellectual property rights remain exclusively with their respective
owners.
Declaration of Conformity
The Coder MC BASIC 400 has been developed, designed and
manufactured in accordance with the following EU directive:
R&TTE (99/5/EC)
0408
Page 2 © SKIDATA AG, April 2004
Coder MC BASIC 400 Manual and operational description
FCC 15.19:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC 15.21:
IMPORTANT: Any changes to or modifications of Coder MC BA-
SIC 400 (all variants) unless expressly approved by SKIDATA™,
may void the user's authority to operate this device.
© SKIDATA AG, April 2004 Page 3
Manual and operational description Coder MC BASIC 400
Coder MC BASIC 400 1
Document Management – Version Table
Tab. 1: Document Version Table for Installation & Maintenance Instructions
Section Document Pages Version Date
1 Coder MC BASIC 400 4 1.0 2004-04-06
Page 4 © SKIDATA AG, April 2004
Coder MC BASIC 400 1
1
Coder MC BASIC
400
Version 1.0
4 pages
Copyright 2004 by SKIDATA AG
1 Coder MC BASIC 400
1.1 Contents
1.1 Contents
1.1 Contents 2
1.2 Electrical connections of the device 3
Page 2 © SKIDATA AG, Version 1.0
Coder MC BASIC 400 1
Electrical connections of the device 1.2
1.2 Electrical connections of the
device
Fig. 1: Connections Coder MC BASIC 400
Fig. 2: Coder MC BASIC 400
© SKIDATA AG, Version 1.0 Page 3
1 Coder MC BASIC 400
1.2 Electrical connections of the device
Page 4 © SKIDATA AG, Version 1.0
Loading...