Page 1
SJE OIL SPOTTER™ SYSTEM
Designed to control one 120V single phase pump using a receptacle for easy pump connections in indoor simplex pump applications. No wiring needed.
The SJE Oil Spotter™ system is designed to provide
pump control and alarm notication of potentially
threatening water and oil levels in simplex pumping
applications.
The system features an innovative, factory-installed
Oil Water Switch that senses the dierence between
oil and water to remove water from the tank, while
preventing oil from entering the environment.
The Oil Water Switch features four probes (start level,
stop level, high water level, reference for ground) and a
mechanical high oil alarm oat.
Common applications include elevator sump basins,
transformer vaults, leachate well applications, garages
or any application requiring ASME A17.1 compliance.
In normal operation, as water and oil enter the tank,
the oil rises to create a oating layer on top of the
water. The water level rises to reach the Start Probe, activating the pump to remove water from the tank. It
continues pumping water out of the tank until the water level falls below the Stop Probe (5" pumping range).
Standard Control Panels
If the water level continues to rise and reaches the High Water Probe, the red high water LED indicator illuminates
and auxiliary contacts close (activating an optional Tank Alert® alarm or other remote device).
If the oil level rises to activate the mechanical High Oil Float, the red high oil LED indicator illuminates and auxiliary
contacts close (activating an optional Tank Alert® alarm or other remote device).
FEATURES
• NEMA 1 enclosure rated for indoor use
• Factory-installed 3 meters (10 feet) power cord
• LED indicators for:
High Water (red)
High Oil (red)
Pump Run (green)
Power (green)
• Factory installed Oil Water switch includes:
High Oil Float
High Water Probe
Start Probe
Stop Probe
Reference Probe
SPECIFICATIONS
Voltage: 120 VAC
Enclosure: 20.32 x 20.32 x 10.16 cm (8 x 8 x 4 inches), NEMA 1 indoor
Receptacle: 120 VAC NEMA type 5-15
Maximum Current: 15 amps
SEE BACK SIDE FOR COMPLETE LISTING OF AVAILABLE OPTIONS.
Phone: +1 218 847 1317
email: customer.service@sjeinc.com
www.sjerhombus.com
B.21
Page 2
SJE OIL SPOTTER™ SYSTEM
Designed to control one 120V single phase pump using a receptacle for easy pump
connections in indoor simplex pump applications. No wiring needed.
ORDERING INFORMATION
Part # Description
1033606 SJE Oil Spotter™ System 5.89 kg
1033578 SJE Oil Spotter™ System with Tank Alert® AB 6.80 kg
SEE INTERNATIONAL PRICE BOOK FOR LIST PRICING.
Standard Control Panels
SPECIFICATIONS
Voltage: 120 VAC
Enclosure: 20.32 x 20.32 x 10.16 cm (8 x 8 x 4 inches), NEMA 1 indoor
Receptacle: 120 VAC NEMA type 5-15
Maximum Current: 15 amps
Ship
Weight
B.22
www.sjerhombus.com
customer.service@sjeinc.com
© 2018 SJE, Inc. All Rights Reserved.
SJE RHOMBUS is a trademark of SJE, Inc.
9500182C 11/18
Loading...