SIX Payment Services davinci AUTONOM, yomani COMPACT, yomani AUTONOM Most Important Functions
The most important
yomani/davinci functions
Purchase
1. Push the <1> button. “Purchase” is activated. 1 : PURCHASE
2. Enter the amount and confirm with <OK>.
The amount is separated (e.g. euros/cents) with a period.
Amounts less than “1” are registered with a “0.” at the beginning.
AMOUNT
3.
Depending on the card type, it must be inserted in the chip card reader, held up to the
contactless reader
1
or pulled through the magnetic swipe reader. If the customer uses
the wrong reader for his or her card, that person is instructed to use the proper reader.
1
davinci: The contac tless reader is located near the payment terminal display.
4.
The amount is displayed for the customer to read. When using a card with an associated
PIN, the customer is instructed to enter the PIN code (4 to 6 digits) and confirm with
<OK>. When using a card without a PIN, only the amount must be confirmed. Generally,
customers do not need to do anything further for a contactless payment of a small amount.
The transaction can be interrupted by pressing <STOP>.
Timeout: If a transaction is not concluded within 30 seconds, the process is aborted.
PIN
5. Payments are processed and, when appropriate, authorised online.
Chip cards: The card must remain inserted in the chip reader during the transaction
until the instructions appear to remove the card.
6. Receipt is printed out. Please follow the terminal’s instructions: If the customer’s
signature is necessary, request that he or she provide one.
7. To print a copy of the receipt: Push the <1> button.
To not print a copy of the receipt: Push the <2> button.
If no button is pushed, a copy is automatically printed after 10 seconds.
1 : COPY
OR
2 : NO COPY
Reversal/Cancellation
With this function, the last transaction that was carried out is cancelled.
1. Push the <3> button. “Cancellation” is activated. 3 : CANCELLATION
2. Enter the terminal’s password and confirm with <OK>.
(For the password, see the configuration sheet.)
PASSWORD
3. The amount of the previous transaction is displayed, and confirm it with <OK>.
4. Cancellation is processed and, when appropriate, authorised online.
5. Receipt is printed out.
6. To print a copy of the receipt: Push the <1> button.
To not print a copy of the receipt: Push the <2> button.
If no button is pushed, a copy is automatically printed after 10 seconds.
1 : COPY
OR
2 : NO COPY
Credit (Refund)
If a transaction can no longer be cancelled (see “Cancellation” on Page 1), a credit can be issued.
1. Push the <4> button. “Credit” is activated.
4 : CREDIT
2.
Enter the terminal’s password and confirm with <OK>.
PASSWORD
3.
Enter the amount and confirm with <OK>.
The amount is separated (e.g. euros/cents) with a period.
Amounts less than “1” are registered with a “0.” at the beginning.
AMOUNT
4.
Only if the DCC function is activated: Enter the date of the original transaction and
confirm with <OK>.
DATE
5. The amount is shown and the card requested.
6. Depending on the card type, it must be inserted in the chip card reader, held up to the
contactless reader
1
or pulled through the magnetic swipe reader.
1
davinci: The contac tless reader is located near the payment terminal display.
7. The cashier signs the receipt as a confirmation.
Daily settlement (close-out)
During the daily settlement, all processed transactions are delivered and closed out. During the daily settlement, all
amounts are credited. A daily settlement should be performed at least once a day – the best time is after the store has
closed. The daily and shift counters are set to “0”. During the shift handover, you can determine which transactions
were carried out during this period (shift).
The shift handover is provided strictly for information purposes and does not replace a daily settlement.
Tips!
– Software updates take place at night and only when shifts are closed. Therefore, do not open a new shift in the
evening after the daily closing is complete.
– After an “end of shift”, cancellations can no longer be carried out.
Use the <STOP> button to get to the terminal’s main menu.
Select Function <2> Balances and afterwards <3> Daily closing.
<STOP> <2> <3>
Enquiries and settings
Enquiries (journal) Settings
Use the <STOP> button to get to the terminal’s main menu.
Select the function <3> Queries.
The following options are available:
– Shift counter (current status of the present shift)
–
Daily counter (current status since the last daily settlement)
– TRX Log Info (current status of transactions following the
last data transmission)
– Print DCC rate (optional)
– Print last ticket
Use the <STOP> button to get to the terminal’s main
menu. Select the function <4> Settings.
The following options are available:
– TRM language (change the language)
– Service PW
– Keypay tones (for yomani only)
– Reader Cleaning (for davinci only)
Notes about the unit
PLEASE NOTE! SIX carries out software updates at night in order to enable you to use your payment terminal
without interruption during the day. For this reason, your payment terminal must be left switched on at night
with a constant Internet connection.
Function Description Buttons
Setup > password
is requested
Call up the main menu with the <STOP> button. Select <5> for the
Setup function. The following terminal-specific functions can be carried
out. It is possible to reach this menu item only with the terminal
password.
<STOP> <5>
<PASSWORD>
Configuration The terminal retrieves the latest configuration parameters. <STOP> <5> <1>
Initialisation Individual or all card issuers are reinitialised. <STOP> <5> <2>
SW update The terminal loads the latest version of the software.
Caution! Downloading the software can take several minutes.
Never pull out the plug.
<STOP> <5> <3>
Trm reset This function is available only to service technicians and is protected
with a special password.
<STOP> <5> <4>
Info The terminal ID and current version of the software are displayed. <STOP> <5> <5>
Print
configuration
The current configuration is printed out.
Note: This detailed printout requires a good deal of paper.
<STOP> <5> <6>
Print HW info This function is available only to service technicians and is protected
with a special password.
<STOP> <5> <8>
System Use this function only if you are requested to do so by our hotline. <STOP> <5> <9>
110.0019.02 INT_EN/03.2015
SIX Payment Services (Europe) S.A.
10, rue Gabriel Lippmann
5365 Munsbach
Luxembourg
SIX Payment Services Ltd
Hardturmstrasse 201
8005 Zurich
Switzerland
Your personal contact: www.six-payment-services.com/contact
Changing paper roll
yomani AUTONOM
1 2 3
yomani COMPACT
davinci AUTONOM
Detailed usage instructions
Are you looking for detailed information about your payment terminal?
You can find the complete usage instructions on our website.
www.six-payment-services.com/terminal
1 2 3 4
1 2 3 4
Loading...