WLX-2001
Introduction
Thank you for purchasing the Sitecom WLX-2001 Range Extender N300. With this product you can easily double the signal coverage of your Wi-Fi network for better Wi-Fi quality in homes with many rooms or multiple floors. With both a Wi-Fi extender and a power adapter in a compact design, the WLX-2001 can be plugged directly into an electrical outlet for convenient placement. The smart signal strength LED makes it easy for you to set it up where your Wi-Fi signal needs enhancement. Additionally, it complies with wireless 802.11b/g/n standards and can create an extended Wi-Fi network with data transmission rates of up to 300Mbps. With the WLX-2001, you can enjoy high-speed wireless networking throughout your home without additional cabling.
The WLX-2001 features a WPS button which allows you to set up the extender quick and easy. Alternatively, the software wizard automatically detects the available Wi-Fi networks nearby and helps you establish a connection within seconds. The WPS button also allows you to connect the extender to the root access point with a simple click of a button. Additionally, the WLX-2001 is designed with a signal strength LED, which helps you find the best setup location for optimal Wi-Fi coverage.
Not only is the WLX-2001 very compact, it is designed with a built-in power adapter. This design allows you to plug it directly into an electrical outlet, eliminating the need for an additional power cable. You can easily install it where your Wi-Fi signal needs enhancement and enjoy high-speed wireless performance without any hassles.
The latest 802.11n technology is built into the WLX-2001 to broaden its wireless coverage and to eliminate dead spots within the wireless range. The WLX-2001 complies with wireless 802.11b/g/n standards and can reach data transmission rates of up to 300Mbps when connected to wireless 802.11n devices. It provides faster and more reliable wireless connections than standard 802.11b/g wireless networks.
This product can be used safely in the countries listed below:
This product complies with the following European Union regulations:
Table of Contents
1 |
KEY FEATURES........................................................................................ |
5 |
|
2 |
PACKAGE CONTENTS ............................................................................... |
6 |
|
3 |
CAUTIONS.............................................................................................. |
7 |
|
4 |
PRODUCT LAYOUT ................................................................................... |
8 |
|
5 NETWORK + SYSTEM REQUIREMENTS ..................................................... |
10 |
||
6 |
WLX-2001 PLACEMENT........................................................................... |
10 |
|
7 |
PC NETWORK ADAPTER SETUP................................................................ |
11 |
|
8 |
BRINGING UP THE WLX-2001.................................................................. |
15 |
|
9 |
INITIAL SETUP WLX-2001....................................................................... |
16 |
|
10 |
CONFIGURATION WIZARD .................................................................... |
18 |
|
11 |
BASIC SETTINGS................................................................................. |
20 |
|
12 |
ADVANCED SETTINGS.......................................................................... |
22 |
|
13 |
TOOLBOX SETTINGS ............................................................................ |
29 |
|
1 KEY FEATURES
Features |
Advantages |
|
|
Incredible Data Rate up to |
Heavy data payloads such as MPEG |
300Mbps* |
video streaming |
|
|
IEEE 802.11n Compliant and |
Fully Interoperable with IEEE |
backwards compatible with |
802.11b / IEEE802.11g compliant |
802.11b/g |
devices with legacy protection |
|
|
Support 802.1x authenticator, |
Provide mutual authentication (Client |
802.11i (WPA/WPA2, AES) |
and dynamic encryption keys to |
|
enhance security |
|
|
Easy to use web-based GUI |
Graphical User Interface for network |
|
configuration and management |
|
purposes. |
|
|
WPS Button |
Easily connect the device to your |
|
existing network and your clients |
|
with just the push of a button. |
|
|
* Theoretical wireless signal rate based on IEEE standard of 802.11b, g, n chipset used. Actual throughput may vary. Network conditions and environmental factors lower actual throughput rate. All specifications are subject to change without notice.
2 PACKAGE CONTENTS
Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials, in case of return; the unit must be shipped back in its original package.
1.The WLX-2001 Range Extender N300
2.A Quick Install Guide
3.A CD (User’s Manual)
4.A Warranty card
5.An UTP cable
6.A 5V 1A power adapter
3 CAUTIONS
This device’s design and manufacturer has your safety in mind. In order to safely and effectively use this device, please read the following before usage.
3.1 Usage Cautions
The user should not modify this device. The environmental temperature should be within +5 ~ +35 degrees Celsius.
3.2 Power
The device’s power voltage is 5 Volt. When plugging in the device, make sure it cannot get damaged or be subject to pressure. To reduce the risk of electric shock, unplug the device first before cleaning it. Never connect the device to the power in a humid or dusty area.
3.3 Repair
If the device has a problem, you should take it to an appointed repair center and let the specialists do the repair. Never repair the device yourself, you might damage the device or endanger yourself.
3.4 Disposing of the device
When you dispose of the device, be sure to dispose of it appropriately. Some countries may regulate disposal of an electrical device, please consult with your local authority.
3.5 Others
When using this device, please do not let it come into contact with water or other liquids. If water is accidentally spilled on the device, please use a dry cloth to absorb the spillage. Electronic products are vulnerable, when using please avoid shaking or hitting the device, and do not press the buttons too hard.
∙Do not let the device come into contact with water or other liquid.
∙Do not disassemble, repair or change the design of the device, any damage done will not be included in the repair policy.
∙Avoid hitting the device with a hard object, avoid shaking the device and stay away from magnetic fields.
∙If during electrostatic discharge or a strong electromagnetic field the device will malfunction, unplug the power cable. The product will return to normal performance the next time it is powered on.
4 PRODUCT LAYOUT
Description
Network Port You can use these ports to connect a wired device so it benefits from the repeated signal.
OPS Button You can use this button to connect using OPS.
OPS Button functions:
Press 0-5 seconds: WPS registrar
Press 5-10 seconds: WPS enrollee
Press 15+ seconds: reset to factory defaults.
LED Description
LED |
Color |
Description |
|
|
|
WLAN |
Blue |
Lights up in Blue when WLAN is enabled. Blinks when OPS is |
|
|
active. |
|
|
|
Power |
Orange |
Lights up when powered ON. Blinks on TEST/RESET. |
|
|
|
Signal |
White |
This LED shows the quality of the signal it receives from your |
|
|
Router/Access Point. |
|
|
0-25%: 250 milliseconds ON – 250 millisecond OFF |
|
|
25-50%: 1000 milliseconds ON – 1000 milliseconds OFF |
|
|
50-100%: Continuous ON |
|
|
|
LAN |
Green |
Lights up when a LAN cable is connected. |
|
|
|
5 NETWORK + SYSTEM REQUIREMENTS
To begin using the WLX-2001, make sure you meet the following as minimum requirements:
∙PC/Notebook.
∙1 Free Ethernet port.
∙WiFi card/USB dongle (802.11 b/g/n) – optional.
∙PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)
∙Ethernet compatible CAT5 cables.
∙Router or Access Point
6 WLX-2001 PLACEMENT
For optimal performance, place your Range Extender in a location that is away from any potential source of interference, such as a metal wall or microwave oven. This location must be within a good signal range from your existing router or access point, preferably above 50% signal strength.
7 PC NETWORK ADAPTER SETUP
Windows XP
∙Enter [Start Menu] -> select [Control panel] -> select [Network].
∙Select [Local Area Connection]) icon -> select [properties]
∙Select [Internet Protocol (TCP/IP)] =>Click [Properties].
∙Select the [General] tab.
The device supports the [DHCP] function, please select both [Obtain an IP address automatically] and [Obtain DNS server address automatically].
Windows Vista/Seven
∙Enter [Start Menu] -> select [Control panel] -> select [View network status and tasks] -> select [Manage network connections].
Loading...