Si Tech Glove Lock QCP User Manual

www.sitech.se

Glove Lock QCP

User Manual

Photo: Anders Salesjö, Lysekil

Glove Lock QCP – User Manual

www.sitech.se

1

2

3

4

1. Suit Ring: No alignment needed,
360° swiveling connection.

2. Lock and Release Ring: made of rubber for
maximum grip, protects the O-ring
from mud and debris.

3. Glove Ring.

4. Concealed O-ring.

Fitting alternatives

• Glove Lock QCP Suit Ring clamped onto fixed seal.

• Glove Lock QCP Suit Ring mounted on top of the Quick Cuff
attachment platform.

This manual does not address the topic of gluing/attaching the Wrist Ring of the
Quick Cuff to your drysuit. Please visit: www.sitech.se for information.

Benefits

• Connects on Quick Cuff*.

• User friendly.

• Self supported.

• Accomodating all hands.

• Fits to most common Dry Gloves.

• Sturdy construction.

The system itself consists of eight
components per arm:

• Suit Rings

• Glove Rings

• O-rings

• Red, green, blue, yellow and black
Spanner Rings

Components

*Quick Cuff is a Modular Quick Change Solution designed to simplify change of broken or torn
wrist seals on drysuits.

We want to congratulate you on your purchase of the Glove Lock QCP, a Dry Glove
system developed and manufactured by SI TECH in Sweden. By reading this manual
you are only some simple steps away from diving it. The Glove Lock QCP is an
easy to mount, easy to use Dry Glove System, designed to perform – no matter
the diving environment. This complete package include components that will fit
your needs undepending the choice of Dry Gloves.

Photo: Jonas Andersson, Lysekil

Glove Ring

Suit Ring

Important information

• The different Spanner Rings included in the package allows use of

a great variety of seals and gloves. The different Spanner Rings are

color coded which indicates various thickness. You simply choose

the thickness best fitted for your choice of seals and gloves.

• Always dive the Glove Lock QCP system with seals installed.

www.sitech.se

1a.1 Find appropriate Spanner Ring and move
it forward through the arm of the suit towards
the latex seal.

1a.3 Press the Suit Ring evenly onto the seal so that the seal tightens in between
the rings. Check for creases on the seal as creases may cause leakage.

1a.2 Position the Spanner Ring so that the
system does not affect your wrist movement
when diving.

1a.4 Test the strength of attachment by pulling
the arm of the suit and the Suit Ring in the
opposite direction. If the Suit Ring falls off,
change the Spanner Ring to a thicker one.

IMPORTANT:

Make sure that the soft rounded edge of the Spanner Ring heads forward so that the sharp edge

of the opposite side does not damage the seal.

The Quick Cuff system is a Modular Quick Change Solution for rapid change
of broken or torn seals. It was developed and launched years before the
Glove Lock QCP. The Glove Lock QCP however was designed so that the
user of Quick Cuff could benefit from it when choosing the Glove Lock QCP.

1b.1 Located on the inside of the Suit Ring of
the Glove Lock QCP, there is an edge that will
act as fixation point for the soft Wrist Ring of
the Quick Cuff System.

1b.2 Squeeze the soft Wrist Ring and insert it
into the Suit Ring of the Glove Lock QCP.
Expand the Wrist Ring fully and arrange so
that the edges of the rings come together.

1b.3 The last steps of the mounting process
is same as with a regular Quick Cuff System.
It only differs by the fact that you need to
choose the black Spanner Ring that comes
with the Glove Lock QCP kit instead of the
Spanner Ring delivered with the
Quick Cuff kit.

Always check for ceases, dirt
or damaged surfaces before mounting
and use of the equipment!

Spanner Ring, black

For illustrative reasons we are using a yellow Wrist Ring. (This is not an available product!)

GLOVE LOCK QCP SUIT RING

1a. Fitting into suit

QUICK CUFF

1b. Fitting onto Quick Cuff