APPLICATION
Simple, incremental heating in the microwave: Place product in clean microwave and
set to 600 or 800 Watt. Heat for 1 minute, remove from microwave and touch-test.
If additional heat is desired, continue heating in 20 second increments. A total heating of 2 minutes should
not be exceeded. Provides heat for about 30 minutes. Heating in the microwave permits precise temperature regulation,
a
n undesired independent heating of the product does not occur.
If it is necessary to fold SISSEL
®
Hydrotemp®pack to fit in the microwave, fold it loosely. Half way
through the heating cycle, remove and reverse the fold. Continue heating the remaining time.
Place SISSEL
®
Hydrotemp®on the bare skin or a thin undershirt (may get slightly wet).
Do not store in an airtight container after the application, s
o that the special micro beads may continue
drawing moisture from the surrounding air. After repeated use, let product rest for about 2 hours.
CLEANING, MATERIAL, STORAGE
I If necessary, wipe product with moist towel, do not moisten or wet completely.
Do not wash in washing machine.
I Materials: Polyster cover with PU foam padding, microbeads, odor-free, dust-free, latex-free.
I Waste disposal: domes
tic waste.
I Store in a clean place, out of the sun.