Page 1
HTV APPLICATION INSTRUCTIONS
EasyWeed , EasyWeed Extra, EasyWeed Electric, EasyWeed Glow
® ® ® ®
For Use On: 100% cotton | Poly/cotton blends | 100% polyester | Leather
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 5-10 seconds.
Peel carrier hot or cold
EasyWeed Stretch (matte)
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with firm pressure for 20 seconds
If areas lift after application, cover and press for 5-10 seconds.
Peel carrier hot or cold
EasyWeed Sub Block
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 5-10 seconds.
Peel carrier hot or cold
EasyWeed Adhesive
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 5-10 seconds.
Peel carrier hot
®
®
®
For Use On: 100% cotton | Poly/cotton blends | 100% polyester | Leather
For Use On: 100% cotton | Poly/cotton blends | 100% polyester | Leather
For Use On: 100% cotton | Poly/cotton blends | 100% polyester
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 305°F / 150°C
(EasyPress® users add approx. 30°)
Use medium pressure for 10-15 seconds
Peel carrier hot or cold
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 320°F / 160°C
(EasyPress® users add approx. 30°)
Use firm pressure for 20 seconds
Peel carrier hot or cold
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 265°F / 130°C
(EasyPress® users add approx. 30°)
Use medium pressure for 10-15 seconds
Peel carrier hot or cold
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 275°F / 135°C
(EasyPress® users add approx. 30°)
Use medium pressure for 5-10 seconds
Peel carrier hot then apply top layer
Laundering:
Wait 24 hours before first wash
Machine wash warm or cold with
mild detergent
Do not bleach or dry clean
Dry on normal dryer setting
Laundering:
Wait 24 hours before first wash
Machine wash cold with mild
detergent
Do not bleach or dry clean
Dry on normal setting
Laundering:
Wait 24 hours before first wash
Machine wash cold with mild
detergent
Do not bleach or dry clean
Hang item to dry
Laundering:
Wait 24 hours before first wash
Machine wash warm or cold with
mild detergent
Do not bleach or dry clean
Dry on normal dryer setting
EasyPatterns
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 10 seconds.
Peel carrier hot or cold
EasyReflective
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 10 seconds.
Peel carrier warm
Blackboard
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 10 seconds.
Peel carrier warm
®
®
®
For Use On: 100% cotton | Poly/cotton blends | 100% polyester | Leather | Lycra®/Spandex
For Use On: 100% cotton | Poly/cotton blends | 100% polyester | Leather
For Use On: 100% cotton | Poly/cotton blends | 100% polyester
Application Instructions (Heat Press):
Cut design (do not mirror). weed then mask
Preheat garment for 2-3 seconds
Apply design at 305°F / 150°C
(EasyPress® users add approx. 30°)
Use medium pressure for 10-15 seconds
Peel carrier hot or cold
Cover and reheat for 2-3 seconds
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 305°F / 150°C
(EasyPress® users add approx. 30°)
Use medium pressure for 15 seconds
Peel carrier warm (wait at least 15 seconds)
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 275°F / 135°C
(EasyPress® users add approx. 30°)
Use medium pressure for 15 seconds
Peel carrier warm
Laundering:
Wait 24 hours before first wash
Machine wash cold with mild
detergent
Do not bleach or dry clean
Dry on normal dryer setting
Laundering:
Wait 24 hours before first wash
Machine wash warm or cold with
mild detergent
Do not bleach or dry clean
Dry on normal dryer setting
Laundering:
Wait 24 hours before first wash
Machine wash cold with mild
detergent
Do not bleach or dry clean
Dry on normal dryer setting
Siser Weeder, parchment or multipurpose paper, or heat transfer cover sheet
Recommended Accessories:
* Due to variances in the manufacturing process of fabrics,
Siser highly recommends testing prior to production.
4-2021
Page 2
HTV APPLICATION INSTRUCTIONS
Glitter
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 10 seconds.
Peel carrier warm
Twinkle
Sparkle
™
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 15 seconds
If areas lift after application, cover and press for 10 seconds.
Peel carrier warm
™
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium pressure for 10-15 seconds
If areas lift after application, cover and press for 5-10 seconds.
Peel carrier hot or cold
For Use On: 100% cotton | Poly/cotton blends | 100% polyester | Leather
For Use On: 100% cotton | Poly/cotton blends | 100% polyester
For Use On: 100% cotton | Poly/cotton blends | 100% polyester | Leather
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 320°F / 160°C
(EasyPress® users add approx. 30°)
Use medium pressure for 15-20 seconds
Peel carrier warm
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 305°F / 150°C
(EasyPress® users add approx. 30°)
Use medium/firm pressure for 15 seconds
Peel carrier warm
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 305°F / 150°C
(EasyPress® users add approx. 30°)
Use medium/firm pressure for 10-15 seconds
Peel carrier hot or cold
Laundering:
Wait 24 hours before first wash
Machine wash warm or cold with
mild detergent
Do not bleach or dry clean
Dry on normal dryer setting
Laundering:
Wait 24 hours before first wash
Machine wash cold with
mild detergent
Do not bleach or dry clean
Dry on low setting
Laundering:
Wait 24 hours before first wash
Machine wash cold with
mild detergent
Do not bleach or dry clean
Dry on low setting
Holographic
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 5-10 seconds.
Peel carrier cold
Metal
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 5-10 seconds.
Peel carrier cold
StripFlock Pro
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 10 seconds.
Peel carrier warm
Brick 600
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 10 seconds.
Peel carrier cold
®
®
For Use On: 100% cotton | Poly/cotton blends | 100% polyester | Leather
For Use On: 100% cotton | Poly/cotton blends | 100% polyester
For Use On: 100% cotton | Poly/cotton blends | 100% polyester | Leather
For Use On: 100% cotton | Poly/cotton blends | 100% polyester
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 320°F / 160°C
(EasyPress® users add approx. 30°)
Use medium pressure for 15-20 seconds
Peel carrier cold
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 305°F / 150°C
(EasyPress® users add approx. 30°)
Use medium pressure for 10-15 seconds
Peel carrier cold
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 311°F / 155°C
(EasyPress® users add approx. 30°)
Use medium pressure for 10-15 seconds
Peel carrier warm
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 311°F / 155°C
(EasyPress® users add approx. 30°)
Use medium/firm pressure for 20 seconds
Peel carrier cold
Laundering:
Wait 24 hours before first wash
Machine wash warm or cold with
mild detergent
Do not bleach or dry clean
Dry on normal dryer setting
Laundering:
Wait 24 hours before first wash
Machine wash cold with mild
detergent
Do not bleach or dry clean
Dry on low dryer setting
Laundering:
Wait 24 hours before first wash
Machine wash warm or cold with
mild detergent
Do not bleach or dry clean
Dry on normal dryer setting
Laundering:
Wait 24 hours before first wash
Machine wash warm or cold with
mild detergent
Do not bleach or dry clean
Dry on low dryer setting
Siser Weeder, parchment or multipurpose paper, or heat transfer cover sheet
Recommended Accessories:
* Due to variances in the manufacturing process of fabrics,
Siser highly recommends testing prior to production.
4-2021
Loading...