Siruba AA-6,AA-2 Instruction Book

{iffl

~~~~

INSTRUCTION BOOK

C€

AA-6

~

®

-~Jii1S3~Jl~flE]

~

KAULIN MFG.CO

.•

LTD.

EC DECLARATION OF

CONFORMITY

According

to

the following

EC

Directive

Machinery Directive : 98

I 37 I

EC

, as

amended

by

8913361

EEC

and

731231

EEC.

The undersigned, DAVID LIN , representing KAULIN MFG. CO .. LTD.

11

F 128 Sec.

3 Min Shen

E.

Road, Taipei , Taiwan ROC., manufacturer, declares that the

machine described hereafter:

Portable Bag Closer

Model

:AA-2/AA-6

Provided that it is used and maintained

in

accordance

with the generally

accepted

codes

of

good

practice and the

recommendations

of the instructions manual, meets the

essential safety and health requirements of the Machinery Directive.

For the most

specific

risks of the machine, safety and

compliance

with the essential
requirements of the Directive has been based on elements of : the European Standard
EN

292 - 1 & - 2 : 1992 Safety of machinery ;

basic

concepts, general principles for

design.

The

compliance

of the model with the requirements of

EC

Machinery Directive was

established by AIB-VINCOTTE Inter n.f.p, Avenue

A.

Drouart 27-29 , B 1160 , Brussels,

Belgium

( Notified

body

under the

number

26 for machinery listed

in

annex

IV

of

EC

Machinery

Directive).

Date:

JUL. I 15 I 2005

Signature :

?J~

L:_,

YJ

Qualification:

VICE CHAIRMAN

General Safety Instructions

Warning ! When using this machine, basic safety precautions should always be followed to reduce the

risk of fire,

electric shock and personal injury, including the following.

Read all these instructions before operating this product and save these instructions.

!.Keep

work area clean.

Cluttered areas and benches invite injuries.

2.Consider work area environment.

Do not expose power to rain. Do not use machine tools

in

damp

or wet locations. Keep work area well lit.

Dot not use power tools where there is risk to cause fire or explosion.

3.Guard against electric shock.

Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges refrigerators).

4.Keep children away.

Do not let visitors touch the tool or extension code.

5.Dress properly.

Do not wear loose clothing or jewelry, they can be caught in moving parts. Wear protecting hair covering to
contain

long hair.

6.Do not abuse the cord.

Never carry the machine by cord or yank it to disconnect it from the socket. Keep the cord away from heat,
oil and sharp edges.

7.Maintain machine with care.

Follow instructions for lubrication and changing accessories. Inspect tool cord periodically and if
damaged have it repaired by

an

authorized serviced facility.

B.

Disconnect machine

When not

in

use, before servicing and when changing accessories.

9.Avoid unintentional starting.

Do not carry a plugged

in

tool with a finger on the switch. Ensure switch is off when plugging

in.

1 O.Check damaged parts.

Before further use of the tool, a guard or other part that is damaged should be carefully checked to
determine that it

will operate properly and perform its intended function.

11. Warning.

The use of any accessory or attachment, other than those recommended

in

this instruction manual, may

present a risk of

personal injury.

12. Have your tool repaired by a qualified person.

Repairs should only be carried out by qualified persons using original spare parts.

Special Warning For Electric Connection !

1 .Incorporate this machine only with

"CE"

certificate hold to run control device.

2.Followthe instruction manual device to install control device.

3.Aiways earth machine

appropriately during operation.

4.Before adjustment, parts change or servicing must be sure to

pull out the plug from socket to prevent

the hazard of unintentionally start of machine.