SIROCO ARIZONA LN S Installation Manual
Installation guide
FM 0120 E 4
26/07/10
Rev.
B
Page 1 of 6
ARIZONA LN S
1 - Device description
2 - Operation
3 - Mounting information
4 - Trouble shooting
5 - Security advice
SIROCO S.A.S.
10 rue Jean Rostand - Z.I.
BP 315
69745 GENAS Cedex
Tel: +33 (0)4 78 90 96 96
Fax: +33 (0)4 78 90 15 98
www.siroco.fr
Installation guide
FM 0120 E 4
26/07/10
Rev.
B
SIROCO S.A.S.
10 rue Jean Rostand - Z.I.
BP 135
69745 GENAS Cedex
Tel: +33 (0)4 78 90 96 96
Fax: +33 (0)4 78 90 15 98
www.siroco.fr
Page 2 of 6
1 - Device description
ARIZONA LN S heater consist of a blower, a coil, a plastic part and a removable front plate. Plastic
part is made from polypropylene. Front plate is made from heat and impact resistant ABS. Heater
operate under one speed: a double poles connector have to be connected. There are an input air
supply (on heater back), an output air supply (on front plate) and an input-output cooling water
supply.
ARIZONA LN S front plate is available in different colors : white, grey, anthracite or black. Heater is
available in 12 V or 24 V with connections pipes diameters of 16 mm.
Product part numbers:
ARIZONA LN S
Voltage
Front plate
color
Part number
White
0120 0351
Grey
0120 0352
Anthracite
0120 0353
12 V
Black
0120 0354
White
0120 0355
Grey
0120 0356
Anthracite
0120 0357
24 V
Black
0120 0358
Blower
Air outlet
Heat exchanger
P
olypropylene
plastic part
Electrical wires
(cross-section 1,5 mm2)
Water input and
output
Double poles
connector
ABS front plate
(supplied sectional)
Loading...