SIROCO ARIZONA Installation Manual
1 - Device description
2 - Operation
3 - Mounting information
4 - Trouble shooting
5 - Security advice
Installation guide
ARIZONA
SIROCO S.A.S.
FM 0120 E 1
26/07/10
Ind.
B
10 rue Jean Rostand - Z.I.
BP 315
69745 GENAS Cedex
Tel: +33 (0)4 78 90 96 96
Fax: +33 (0)4 78 90 15 98
www.siroco.fr
Page 1 of 6
Installation guide
Air outlet
Heat exchanger
Water output
Electrical wires
3 speeds control knob
Water input
ABS
front plate
Knob
s
location
FM 0120 E 1
26/07/10
Ind.
B
1 - Device description
ARIZONA heater consist of a blower, a coil, a plastic part and a removable front plate. Plastic part is
made from polypropylene. Front plate is made from heat and impact resistant ABS. Heater can
operate under three different speeds: a control knob enables to select speed from front plate. There
are two input air supply (on heater side), an output air supply (on front plate) and an input-output
cooling water supply. Heater including an integrated valve controlled from front plate with a knob.
ARIZONA’s front plate is available in different colors : white, grey, anthracite or black. Heater can
be equipped with 600, 400 or 300 blower that supplied in 12 V or 24 V with connections pipes
diameters of 16 mm.
Polypropylene
plastic part
Blower
(supplied sectional)
(cross-section 1,5 mm2)
Valve
Valve control knob
Double poles
connector
Product part numbers:
Voltage
12 V
24 V
Front plate
color
White
Grey
Anthracite
Black
White
Grey
Anthracite
Black
ARIZONA 600 ARIZONA 400 ARIZONA 300
Part number Part number Part number
0120 0001 0120 0101 0120 0201
0120 0002 0120 0102 0120 0202
0120 0003 0120 0103 0120 0203
0120 0004 0120 0104 0120 0204
0120 0005 0120 0105 0120 0205
0120 0006 0120 0106 0120 0206
0120 0007 0120 0107 0120 0207
0120 0008 0120 0108 0120 0208
SIROCO S.A.S.
10 rue Jean Rostand - Z.I.
BP 135
69745 GENAS Cedex
Tel: +33 (0)4 78 90 96 96
Fax: +33 (0)4 78 90 15 98
www.siroco.fr
Page 2 of 6
Loading...