Sirman S 20, S 20 VV Instructions For Use And Maintenance Manual
Professional Hand-Held Mixer
S 20
Regular,
Speed variator,
SERVICE CENTRE
AUTHORISED DEALER
24
Ed. 11/2015
Instructions for use and maintenance
1
CHAP. 8 - DISPOSAL OF THE MACHINE
8.1 - DISINSTALLATION
If it has been decided to disinstall the machine for some reason, ensure that the
machine is unusable by anyone: detach and cut electrical connections.
8.2 - WEEE Waste of Electric and Electronic Equipment
Directive 2002/95/EC, 2002/96/EC and 2003/108/EC on the restriction of the
use of certain hazardous substances in electrical and electronic
equipment, and waste electrical and electronic equipment.
This symbol, crossed out wheelie bin, on the product or on its packaging indicates that
this product must not be disposed of with your other ho use hold waste.
Separate waste collection of this appliance is organised and managed by the
manufacturer. It is the user’s responsibility to contact the manufacturer and follow the
waste treatment system the manufacturer has adopted for separate waste collection.
The separate collection and recycling of your waste equipment at the time of disposal
will help to conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment.
2 23
CHAP. 7 - MAINTENANCE
7.1 - GENERAL INFORMATION
Before carrying out any maintenance task, it is recommended to:
unplug the feeding cable from the net to insulate the machine from the rest of the
plant completely.
7.2 - DIPPING OF ACCIDENTAL FALL OF THE MACHINE
In case of immersion or accidental fall of any accessory or the machine itself, do
not use it and contact CUSTOMER SERVICE.
7.3 - SHAFT
Check that the shaft is firmly and solidly fixed to the engine’s body. If this is not
the case, please contact CUSTOMER SERVICE.
7.4 - FEEDING CABLE
Periodically, check the state of wear of the feeding cable and in case, contact
CUSTOMER SERVICE.
7.5 - COMMANDS LINING
Periodically, check the state of wear of the rubber commands lining and in case
of wear contact CUSTOMER SERVICE.
7.6 - BLADE
Check the sharpness of the shaft’s blades to replace them, please contact
CUSTOMER SERVICE.
7.7 - GASKETS - SEALING RINGS
Periodically check the sealing gaskets, once the knife-holding base is
disassembled (Fig. n°51).
If these show wear, contact CUSTOMER SERVICE.
INTRODUCTION
This manual has been written to supply the Customer with all the information on the
machine and the related safety rules, as well as the instructions for the receipt of the
machine itself, cleaning, maintenance and disposal that allow to use and maintain the
means keeping its efficiency intact throughout the time.
This manual it to be kept till the disposal of the machine.
This manual is to be kept at disposal of members of staff that have been appointed to
operate the machine and to carry out maintenance tasks.
TABLE OF CONTENTS
CHAP. 1 - RECEIPT OF THE MACHINE page 5
1.1 - PACKAGING
1.2 - BOX CHECK UPON RECEIPT
CHAP. 2 - INSTALLATION page 6
2.1 - UNWRAPPING
2.2 - PLACEMENT
2.3 - ELECTRICAL CONNECTION
2.4 - ELECTRICAL DIAGRAM
CHAP. 3 - MACHINE’S INFORMATION page 8
3.1 - GENERAL PRECAUTIONS
CHAP. 4 - GETTING ACQUAINTED WITH THE MACHINE page 11
4.1 - IN-BUILT FEATURES
4.2 - IN-BUILT SAFETY DEVICES
4.2.1 - Mechanical safety devices
4.2.2 - Electrical safety devices
4.3 - MACHINE’S DESCRIPTION
4.4 - OVERALL DIMENSIONS, WEIGHT, FEATURES
CHAP. 5 - USE OF THE MACHINE page 15
5.1 - ACCESSORIES ASSEMBLY
5.2 - PREPARATORY CHECK
5.3 - USE’S FIELDS
5.4 - MACHINE’S USE
CHAP. 6 - REGULAR CLEANING page 19
6.1 - GENERAL INFORMATION
6.2 - EXTRA CLEANING
6.2.1 - GENERAL INFORMATION
22
3
CHAP. 7 - MAINTENANCE page 22
7.1 - GENERAL INFORMATION
7.2 - DIPPING OF ACCIDENTAL FALL OF THE MACHINE
7.3 - SHAFT
7.4 - FEEDING CABLE
7.5 - COMMANDS LINING
7.6 - BLADE
7.7 - GASKETS – SEALING RINGS
CHAP. 8 - DISPOSING OF THE MACHINE page 23
8.1 - DISINSTALLATION
8.2 - WEEE Waste of Electric and Electronic Equipment
(Fig. n°50)
Such operation is an exclusive re-
quirement of this machine.
This operation is to be carried out
only in case of poor cleaning tasks
executed by previous operators or in
case unpleasant smells, internal encrustations, etc. can be perceived.
This operation is quite delicate and
particular even if simple and could
compromise the functioning of the
machine. Therefore, it is recommended to have it carried out only by
responsible and expert members of
Fig. n°50
staff.
ATTENTION: this operation exposes
the operator to risks due to the manipulation of knives and sharp parts. Hence, it
is recommended to use protective gloves and to be extremely careful all the
time.
Disassembly of the shaft (Fig. n°51)
1. Detach the shaft from the engine’s body and position it on a surface with the
knives on the right side.
2. Predispose the tools (a-b), grip the tool (b) with the left hand and insert it in the
dragging device inside the shaft
3. ATTENTION: Using a key (a), unscrew clockwise till the blade group is re-
moved.
4. Remove the inner shaft from the main shaft pushing it towards the tool (b).
5. Proceed to clean the single pieces with a dump cloth and some dish detergent,
keeping in mind that the bearings must not come into contact with liquids.
6. In case of encrustation, insist with the cloth. Do not use abrasives, pointy or
sharp tools.
7. Disassemble everything the opposite way. ATTENTION: fix firmly the knife or
this could detach itself during the operating stage.
2
(b)
3
1
(a)
4
21
Fig. n°51
Loading...