Sirman PD VC Operating And Maintenance Manual
16
SERVICE CENTRE
AUTHORISED DEALER
1
CERAMIC GLASS GRILLS
mod.PD VC
Ed. 04/2012
OPERATING AND MAINTENANCE MANUAL
2 15
CHAP. 9 - ELECTRICAL CIRCUIT DIAGRAM
9.1 - 220-240V ELECTRIC CIRCUIT DIAGRAM
Fig. n°7
14
CHAP. 8 - DISPOSAL OF THE MACHINE
8.1 - PUTTING THE MACHINE OUT OF SERVICE
If for some reason, you decide to put the machine out of service, make sure
nobody can use it: disconnect it from the mains and eliminate the
electrical connections.
8.2 - WEEE Waste of Electric and Electronic Equipment
Directive 2002/95/EC, 2002/96/EC and 2003/108/EC on the restriction of
the use of certain hazardous substances in electrical and electronic
equipment, and waste electrical and electronic equipment.
This symbol, crossed out wheelie bin, on the product or on its packaging indicates that this product must not be disposed of with your other household
waste.
Separate waste collection of this appliance is organised and managed by the
manufacturer. It is the user’s responsibility to contact the manufacturer and
follow the waste treatment system the manufacturer has adopted for separate
waste collection.
The separate collection and recycling of your waste equipment at the time of
disposal will help to conserve natural resources and ensure that it is recycled
in a manner that protects human health and the environment.
3
This manual is meant to provide customers with information on the
machine and its specifications and the necessary operating and
maintenance instructions in order to guarantee the best possible use of
the machine and preserve its efficiency in the long term.
This manual is to be used by qualified and skilled people well informed
about the use of the machine and its periodical maintenance.
CONTENTS
CHAP. 1 - INFORMATION ON THE MACHINE pag. 5
1.1 - GENERAL PRECAUTIONS
1.2 - SAFETY DEVICES INSTALLED ON THE MACHINE
1.2.1 - electrical safety devices
1.3 - DESCRIPTION OF THE MACHINE
1.3.1 - general description
1.3.2 - manufacturing features
1.3.3 - machine components
CHAP. 2 - TECHNICAL DATA pag. 8
2.1 - OVERALL DIMENSIONS, WEIGHT, CHARACTERISTICS...
CHAP. 3 - THE ARRIVAL OF THE MACHINE pag. 9
3.1 - DESPATCH OF THE MACHINE
3.2 - PACKAGE CHECK UPON RECEIPT
3.3 - PACKAGE DISPOSAL
CHAP. 4 - INSTALLATION pag.10
4.1 - SETTING UP OF THE MACHINE
4.2 - ELECTRICAL CONNECTIONS
4.3 - FUNCTIONING CHECK
CHAP. 5 - USE OF THE MACHINE pag.11
5.1 - CONTROLS
5.2 - FIRST USE OF THE MACHINE
CHAP. 6 - GENERAL CLEANING pag.13
6.1 - INTRODUCTION
CHAP. 7 - MAINTENANCE pag.14
7.1 - GENERAL FEATURES
INTRODUCTION
Loading...