Sirius Satellite Radio XTR8CK User Manual

Instruction Manual

To activate your XACT Sirius Satellite Radio Receiver or for latest news and questions regarding Sirius Satellite Radio service visit www

.sirius.com or call 1-888-539-SIRIUS (7474).

For accessory & product information visit us at www.getxact.com.

Pause Rewind Replay

LIVE SATELLITE RADIO

Model XTR8CK

KEEP ON LISTENING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and Receiver.

• Connect the equipment into an outlet on a circuit different from that to which the Receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the Manufacturer for compliance could void the user’s authority to operate the equipment. The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

Note: Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v

Vehicle Adapter that is provided with the kit. It is important that you do not modify it in any way as this may result in damage to your equipment and void the warranty.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher.

“Sirius” and Sirius dog logo and related marks are registered trademarks of Sirius Satellite Radio Inc. To activate your XACT Sirius Satellite Radio Receiver or for latest news and questions regarding Sirius Satellite Radio service visit www.sirius.com or call 1-888-539-SIRIUS (7474).

SAFETY PRECAUTIONS

Warning

Follow these notifications to avoid any traffic accidents or personal injury:

1. Installation must be performed according to this user guide.

2. Do not install the device where it may obstruct your view through the windshield or your vehicle’s indicator displays.

3. Do not install the device where it may hinder the function of safety devices such as an airbag. Doing so may prevent the airbag from functioning properly in the event of an accident.

4. The installation and usage suggestions contained in this user guide are subject to any restrictions or limitations that may be imposed by applicable law. The purchaser should check applicable law for any restrictions or limitations before installing and/or operating this device.

5. Failure to follow these safety instructions and warnings may result in a severe accident.

Danger

Be aware of the following precautions to prevent fire and avoid personal injury:

1. To avoid short circuits, never put or leave any metallic objects (coins, tools, etc.) inside the device.

2. If the device emits smoke or strange smells, turn the power off immediately and contact your dealer.

3. Do not drop the device or subject it to strong impacts or mechanical shocks.

4. If the LCD display becomes damaged or broken, do not touch the liquid crystal fluid. The fluid may be dangerous to your health or even fatal. If the liquid crystal fluid contacts your body or clothing, immediately wash it off with soap and water.

Caution

Do not operate this device in a way that might divert your attention from driving safely. As a driver, you are responsible for safely operating your vehicle in accordance with traffic safety laws at all times.

TABLE OF CONTENTS

Introduction Page 3

Product Overview Page 3 Package Contents Page 3

Components Guide Page 4

XACT Sirius Satellite Radio Receiver Page 4 Wireless Remote Control Page 5

Getting Started Page 6

Mounting Your XACT Sirius Satellite Radio Receiver at Home Page 6 Mounting Your XACT Sirius Satellite Radio Receiver in a Vehicle Page 6 Activating Your Sirius Subscription Page 7 Accessing and Making Note of Your Identification Number Page 7 Using The Vehicle Kit Page 9 If you Have Purchased the Home Kit Page 10

Satellite Radio Operations Page 12

Tuning to Different Channels Page 12 Direct Tuning to Different Channels Page 12 Tuning to Different Entertainment Categories Page 12

Display Options Page 13

Changing the Display Text Size Page 13

Display List Options Page 14

Channel List Page 14 Artist Name List Page 14 Song Title List Page 15

Presets Page 16

Storing Channel Presets Page 16 Using Channel Presets Page 17 Searching for Channel Presets (P. Tune Mode) Page 17

Memory and SIRIUS-Seek (S-Seek) Functions Page 19

Storing Artist Names, Song Titles, and Sports Teams to Memory Page 19 Initial Game Alert Page 21 All Score Updates Page 21 Viewing Stored Alerts Stored in Memory Page 23 Deleting an Alert Stored in Memory Page 24 Activating the SIRIUS-Seek (S-Seek) Alert Page 25

Jump Set Feature Button Page 26 FM Frequency Button Page 28 Game Alert Page 28 Instant Replay Page 29

Pause/Play Page 29 Fast Forward Page 30 Rewind Page 30 Using Instant Replay Page 31

TABLE OF CONTENTS

Menu Options Page 34

FM Transmitter Page 34

FM Presets Page 35

FM On/Off Page 36 Game Alert Page 36 Settings Page 38

Jump Settings Page 38

Traffic Page 39

JumpSet Page 40 Display Options Page 41 Memory Options Page 42

Clear All Memory Page 43 Auto Select Page 43 Audio Level Page 44 Confirmation Tone Page 45 Parental Control Page 45

Lock/Unlock Page 46

Edit Code Page 47

Time Based Features Page 50

Clock Page 50 Format Page 51 Time Zone Page 51 Daylight Savings Time Page 52 Alarm Page 52

Set Alarm Page 52

Alarm Time Page 53 Program Alert Page 54

Program Time/Day Page 54

Channel Number Page 55

Program Alert On/Off Page 56

Auto Shutdown Page 56 Sleep Mode Page 57 Signal Indicator Page 58

Sirius Satellite Map Page 58

Factory Default Page 59 Problem Solving Page 61 Warranty Page 62 Warranty Page 63

INTRODUCTION

Product Overview

Thank you for purchasing this product! Your new plug and play XACT Sirius Satellite Radio Receiver is specifically designed to mount in a vehicle or indoor/outdoor location.

Package Contents

Carefully unpack your kit and ensure that you have the following items.

• XACT Sirius Satellite Radio Receiver

• Wireless Remote Control

• CR2025 Battery (for the Wireless Remote Control)

• Vehicle Mounting Bracket (Windshield / Dashboard)

• Vehicle Antenna

• 12v Vehicle Adapter

• User’s Guide

In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer.

Your XACT Sirius Satellite Radio Receiver must be used in conjunction with any one of the following XACT Kits, such as the Vehicle kit or Home kit as required by your specific needs.

• XACT Vehicle Kit: Model Number XS081

• XACT Home Kit: Model Number XS082

The easiest way to activate your XACT Sirius Satellite Radio Receiver is to log on to www.sirius.com. You may also call 1-888-539-SIRIUS (7474).

INTRODUCTION

COMPONENTS GUIDE

XACT Sirius Satellite Radio Receiver

1. Power Button/IR for Remote Control

2. Rewind

3. Play/Pause

4. Fast Forward

5. Memo/SIRIUS-Seek

6. Display

7. Select

8. Channel Up and Down

9. Category Left and Right (jump to the next or previous category)

10. Numerical Keys (presets or direct tunning)

11. Band/Preset Tune Mode

12. FM Transmitter Button

13. Jump Button

14. Menu

15. Antenna Jack

16. FM Out Jack

17. Audio Jack

18. DC Power Jack

COMPONENTS GUIDE

Wireless Remote Control

The wireless remote control packed with your plug and play XACT Sirius Satellite Radio mirrors the operations of your plug and play XACT Sirius Satellite Radio Receiver from a remote location.

1. Power Button

2. Category Left and Right (jump to the next or previous category)

3. Mute

4. Channel Up and Down

5. Play/Pause

6. Fast Forward

7. Volume Up and Down

8. FM Transmitter Button

9. Display

10. Memo/SIRIUS-Seek

11. Numerical Keys (presets or direct tunning)

12. Band/Preset Tune Mode

13. Menu

14. Jump Button

15. Rewind

16. Select

COMPONENTS GUIDE

GETTING STARTED

Mounting Your XACT Sirius Satellite Radio at Home

Find an appropriate location near your stereo receiver to install your plug and play XACT Sirius Satellite Radio Receiver.

Mounting Your XACT Sirius Satellite Radio in a Vehicle

Find an accessible location in your vehicle to install your plug and play XACT Sirius Satellite Radio Receiver; usually, this is on or near the dashboard.

Do not mount your device where it may obstruct your view through the windshield or your view of your vehicle’s indicator displays.

Do not mount your device where it may impede your access to the vehicle’s controls.

Do not mount your device where it may hinder the function of safety devices, such as an airbag. Doing so may prevent the airbag from functioning accordingly in the event of an accident.

Mount your XACT Sirius Satellite Radio Receiver where it can be easily reached.

The device must be directly in line-of-sight of the remote controller.

If you're not going to operate your vehicle for an extended period of time (e.g. parking garage while on vacation) unplug your XACT Sirius Satellite Radio Receiver from the the cigarette lighter adapter.

Note: Do not modify or alter in any way the wires or connections especially to the 12v vehicle adapter.

Doing so will prevent the protection provided in the circuitry from functioning properly and result in damaging your receiver. This will void your warranty.

Activating Your Sirius Subscription

Before beginning to use your new device, you must first subscribe to Sirius Satellite Radio service.

There are two ways to activate the Sirius Satellite Radio Service:

1. Visit www.sirius.com and click activate, then follow the on-screen instructions.

2. Call Sirius at 1-888-539-7474. A representative will help you activate your Sirius Satellite Radio Service.

Note: Make sure to have your identification number accessible when calling Sirius.

Accessing and Making Note of Your Identification Number

3. Press the POWER button to turn the Receiver On. The Receiver will display the SIRIUS logo.

4. The Receiver will update the SIRIUS channel line up. The display will show, "UPDATING CHANNELS" and

show the status of the update. Wait until the channel updates have completed before pressing any buttons on the Receiver.

5. Once the channels have been updated, the display will change to "Call 1-888-539-SIRIUS to Subscribe"

and will place you in SIRIUS Satellite Radio's Preview Channel, channel 184.

Note: You will only be able to tune to channel 000 and 184 until you activate your SIRIUS subscription.

6. Using the CHANNEL UP and CHANNEL DOWN buttons, tune the Receiver to channel 000 to display the

Receiver's unique 12-digit SIRIUS ID Number (SID/ESN). Write the SID/ESN number down in the space provided at the end of this manual. The SID may also be accessed by Pressing the Select button to enter direct tuning mode or entering 000 on the remote control or Receiver.

Note: The SID/ESN is also available on the XTR8CK packaging.

7. When you have successfully subscribed to SIRIUS Satellite Radio service, and the Receiver has been

updated with your subscription information, an alert will be displayed. To continue, press any key on the Receiver. The activation of your Receiver is now complete.

Mounting to the Dashboard or Console

Note: Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v

Vehicle Adapter that is provided with the kit. It is important that you do not modify it in any way as this may result in damage to your equipment and void the warranty.

If using the AAMPs mounting holes to fasten the Vehicle Mount to your vehicle, Bolt or screw the Vehicle Mount in place and proceed to step

1. Remove the protective film from one side of the supplied double sided 3M tape. Press firmly to secure the tape to the bottom of the Vehicle Mount. (figure 1).

2. Slide the XACT Sirius Satellite Radio Receiver (figure 2) onto the mounting tab of the Vehicle Mount until it engages. (figure 3).

3. Connect the DC Power,antenna and audio (if required) to the appropriate jacks. (figure 4).

INSTALLATION

USING THE VEHICLE KIT

Mounting to the Windshield

Note: Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v

Vehicle Adapter that is provided with the kit. It is important that you do not modify it in any way as this may result in damage to your equipment and void the warranty.

1. Insert the 4 suction cups into the larger side of the holes on the Vehicle Mounting Bracket and slide outward to lock in place. (figure 1).

2. Slide the XACT Sirius Satellite Radio Receiver (figure 2) onto the mounting tab of the Vehicle Mount until it engages. (figure 3).

3. Place the suction cups on the Vehicle Mount in an appropriate location on your windshield. Press firmly to secure the Receiver in place. (figure 3).

4. Connect the DC Power, antenna and audio (if required) to the appropriate jacks. (figure 4).

INSTALLATION

Mounting in your Home

Note: Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v

Vehicle Adapter that is provided with the kit. It is important that you do not modify it in any way as this may result in damage to your equipment and void the warranty.

1. Slide the XACT Sirius Satellite Radio Receiver onto the mounting tab of the Home Stand until it engages. (figure 1).

2. Place the Home Mount in an appropriate location on a table, desk, shelf, etc... (figure 2).

3. Connect the DC Power, antenna and audio (if required) to the appropriate jacks. (figure 3).

IF YOU HAVE PURCHASED THE HOME KIT

INSTALLATION

After you have successfully activated your SIRIUS Satellite Radio subscription, and the Receiver has received the subscription information from the SIRIUS signal, the default display screen will be displayed.

Tuning to Different Channels

Pressing the CHANNEL UP or CHANNEL DOWN button will cause the Receiver to immediately tune to the next or previous channel.

Pressing the CATEGORY PREVIOUS or CATEGORY NEXT button again will cause the Receiver to display a channel listing for that category. Use the CHANNEL UP or CHANNEL DOWN buttons to highlight a channel within the category and press the Select button to tune to the highlighted channel. When a new channel is selected, the display will revert to the default display screen for the new channel. To exit the channel list mode without changing to a different channel, press and hold the DISP button for 1½ seconds, until the default screen is displayed.

Direct Tuning to Different Channels

A channel may be directly selected by entering the channel number using the 0 - 9 buttons on the Receiver. To enter a channel number, momentarily press and release the Select button. At the display prompt enter the three digit channel number.

Tuning to Different Entertainment Categories

Pressing the CATEGORY PREVIOUS or CATEGORY NEXT button will cause the receiver to display a list of the channels in the current category, highlighting the channel to which you are currently tuned.

SATELLITE RADIO OPERATIONS

3-Digit Channel Number

Song Title

Artist’s Name

Category Name

Channel Name

Clock

Band or Preset Bank Number

Signal Strength Indicator

A momentary press of the DISP button while in the category list mode will cause the Receiver to display the current list of Artist Names.

The next momentary press of the DISP button will cause the Receiver to display the current list of Song Titles.

Display Options

Changing the Display Text Size

Momentarily pressing and releasing the DISP (Display) button while the default screen is displayed changes the artist name and song title to a scrolling single line, large format display for easier viewing from a distance.

Normal Text Size

Large Text Size

Display List Options

Pressing and holding the DISP button for 1½ seconds will cause the Receiver to enter the channel, artist name, or song title list mode.

Channel List

The channel list mode makes it easy to quickly search for and locate music by channel name.

Once the Receiver has entered the channel list mode, a listing of the channel numbers and names are displayed.

Artist Name List

Momentary pressing and releasing the DISP button while in the channel list mode will cause the Receiver to display the current list of Artist Names.

Song Title List

The next momentary press of the DISP button will cause the Receiver to display the current list of Song Titles.

Note: If you are viewing a sports category channel list (NFL®, NBA®, NHL®, or College), pressing the

DISP button will instead toggle between the team names and the current score of any live play-by-

play game. Use the CATEGORY PREVIOUS and CATEGORY NEXT buttons to scroll through the music and entertainment categories, and the CHANNEL UP and CHANNEL DOWN buttons to scroll through the available channels in each category to find the channel to which you want to listen. When you have found the channel you wish to listen to, highlight the channel using the CHANNEL UP and CHANNEL DOWN buttons and press the Select button to tune to the channel. The new channel will begin playing and the display will revert to the default display screen for the new channel.

To exit the channel list mode without changing to a different channel, press and hold the DISP button for 1½ seconds, until the default screen is displayed.

Presets

You can store up to 30 of your favorite channels as presets for quick recall access. The preset channels are stored in 3 bands, A, B, and C, each containing 10 channel presets, and are numbered 0 to 9. The 10 channel presets in each band are accessed by pressing the appropriate number (0 to 9) on the Receiver. A momentary press and release of the BAND button cycles through the 3 preset bands (A, B, and C).

Storing Channel Presets

To store a favorite channel as a preset, do the following:

1. Momentarily press and release the BAND button until the desired preset band, A, B, or C is displayed in the lower right corner of the default display screen.

2. Tune the Receiver to the channel you wish to store as a preset. (See the section, Basic Operation for specific instructions for tuning to a channel).

3. Press and hold for 1½ seconds the numbered PRESET button in which you wish to store your favorite channel, until you hear a beep.

The band and preset number will then be displayed in the lower right corner of the display screen to confirm that the channel has been stored.

Note: If the preset location already has a channel stored, the preset will be replaced by the newly stored

channel.

Using Channel Presets

The active band of presets (A, B, C) is displayed in the lower right corner of the default display screen. To change the active band, momentarily press and release the BAND button to cycle between the preset bands. The 10 preset channels in the active band may then be selected by momentarily pressing and releasing the 0 through 9 buttons. When you have chosen a preset channel, the band and preset number will be displayed in the lower right corner of the default display screen as indicated above.

Searching for Channel Presets (P. Tune Mode)

To quickly search through all of your presets in the P. TUNE mode, do the following:

1. Press and hold the BAND button for approximately 1 second to enter the P.TUNE mode. "Preset Tune Mode" will momentarily be displayed.

The display will invert in the upper left and lower right corners to indicate the Receiver is in the Preset Tune Mode.

+ 47 hidden pages