Sirius Satellite Radio XTR2CK User Manual

Instruction Manual

Model

XTR2CK

To activate your Satellite Radio Receiver or for latest news and questions regarding SIRIUS

Satellite Radio service visit sirius.com or call 1-888-539-SIRIUS (7474).

For accessory & product information visit us at www.getxact.com.

KEEPMOVING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the Manufacturer for compliance could void the user’s authority to operate the equipment

NOTE! Use only the appropriate accessories or input devices with your receiver. Use only the 12v Vehicle

Adapter that is provided with the kit. It is important that you do not modify it in any way since this will result in damaging your equipment and void the warranty.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher.

is a registered trademark of SIRIUS

Satellite Radio. To activate your Satellite Radio Receiver or for latest

news and questions regarding SIRIUS

Satellite Radio service visit sirius.com or

call 1-888-539-SIRIUS (7474).

SAFETY PRECAUTIONS

Warning

Follow these notifications to avoid any traffic accidents or personal injury:

1. Installation must be performed according to this user guide.

2. Do not install the device where it may obstruct your view through the windshield or of your vehicle’s indicator displays.

3. Do not install the device where it may hinder the function of safety devices such as an airbag. Doing so may prevent the airbag from functioning properly in the event of an accident.

4. The installation and usage suggestions contained in this user guide are subject to any restrictions or limitations that may be imposed by applicable law. The purchaser should check applicable law for any restrictions or limitations before installing and/or operating this device.

5. Failure to follow these safety instructions and warnings may result in a severe accident.

Danger

Be aware of the following precautions to prevent fire and avoid personal injury:

1. To avoid short circuits, never put or leave any metallic objects (coins, tools, etc.) inside the device.

2. If the device emits smoke or strange smells, turn the power off immediately and contact your dealer.

3. Do not drop the device or subject it to strong shocks.

4. If the LCD display becomes damaged or broken, do not touch the liquid crystal fluid. The fluid may be dangerous to your health or even fatal. If the liquid crystal fluid contacts your body or clothing, immediately wash it off with soap and water.

Caution

Do not operate this device in a way that might divert your attention from driving safely. As a driver, you are responsible for safely operating your vehicle in accordance with traffic safety laws at all times.

TABLE OF CONTENTS

Introduction Page 3 Product Overview Page 3 Package Contents Page 3 Components Guide Page 4 Xact Stream | jockey II SIRIUS®Radio Page 4 Wireless Remote Control Page 5 Getting Started Page 6 Mounting Your Xact Stream | jockey II Satellite Radio at Home Page 6 Mounting Your Xact Stream | jockey II Satellite Radio in a Vehicle Page 6 Activating Your SIRIUS

Subscription Page 7 Basic Operations Page 10 Tuning to Different Entertainment Categories Page 10 Searching for Music Page 11 Searching For Music By Channel Page 11 Searching For Music By Artist/Composer Page 11 Searching For Music By Song Page 12 Direct Tuning Page 12 Presetting Channels Page 13 Searching for a Preset Channel/Artist/Song Page 14 S-Seek Function Memo (Memory Search) Button Page 15 Performing S-Seek Function Page 16

Menu Options Settings Page 18 Basic Setting Procedure Page 18

SIRIUS

ID Page 18 Display Settings Page 19 FM Transmitter Page 20 Channel Add/Skip Page 21 Lock Options Page 21 Audio Level Page 23 Antenna Aiming Page 24 SIRIUS® Satellite Map Page 24

Memory Options Page 25 Time Features Page 26 Clock Page 27 Format Page 27 Time Zone Page 27

TABLE OF CONTENTS

Daylight Saving Time Page 28 Alarm Clock Page 28 Time Page 28 Program Alert Page 29 Program Day/Time Page 29 Channel Selection Page 30 Auto Shutdown Page 30 Sleep Mode Page 31 Factory Default Page 31 Display Messages Page 33 Problem Solving Page 35 Warranty Page 36

INTRODUCTION

Product Overview

Thank you for purchasing this product! Your new plug and play XACT Stream | jockey II satellite radio is specifically designed to mount in a vehicle or indoor/outdoor location.

In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer.

Your Xact Stream | jockey II Satellite Radio Receiver must be used in conjunction with any one of the following Xact Kits, such as the Universal kit, Home kit or Boom Box as required by you specific needs.

• Xact Vehicle Kit: Model Number XS031

• Xact Home Kit: Model Number XS032

• Xact Sound Pad Portable Boom Box: Model Number XS034

The easiest way to activate your Satellite Radio Receiver is to log on to sirius.com. You may also call 1-888-539-SIRIUS (7474).

COMPONENTS GUIDE

XACT Stream | jockey II SIRIUS®Radio

1. LCD Monitor (Main Display)

2. CH (Channel) (Ascend/Descend Buttons)

3. DISP (Display)

4. CAT (Category) (Left/Right Directional Buttons)

5. BAND (P-TUNE)

6. IR for Remote Control

7. Power Button

8. MENU Options List

9. SELECT (OK Button)

10. MEMO (S-Seek)

11. Numerical Keys

12. Audio Jack

13. DC Power Jack

14. Antenna Jack

COMPONENTS GUIDE

Wireless Remote Control

The wireless remote control packed with your plug and play XACT Stream | jockey II satellite radio mirrors the operations of your plug and play XACT Stream | jockey II satellite radio receiver from a remote location.

1. CH (Channel) (Ascend/Descend Buttons)

2. MUTE

3. BAND

4. DISP (Display)

5. P-TUNE

6. MEMO

7. Power Button

8. SELECT (OK Button)

9. CAT (Category) (Left/Right Directional Buttons)

10. Volume Adjustment

11. MENU Options List

12. S-Seek

13. Numerical Keys

GETTING STARTED

Mounting Your XACT Stream | jockey II Satellite Radio at Home

Find an appropriate location near your stereo receiver to install your plug and play satellite radio receiver.

Mounting Your XACT Stream | jockey II Satellite Radio in a Vehicle

Find an accessible location in your vehicle to install your plug and play satellite radio receiver; usually, this is the dashboard.

Do not mount your device where it may obstruct your view through the windshield or your view of your vehicle’s indicator displays.

Do not mount your device where it may impede your access to the vehicle’s controls.

Do not mount your device where it may hinder the function of safety devices, such as an airbag. Doing so may prevent the airbag from functioning accordingly in the event of an accident.

Mount your satellite radio where it can be easily reached.

The device must be directly in line-of-sight of the remote controller.

NOTE! Do not modify or alter in any way the wires or connections especially to the 12v vehicle adapter. Doing

so will prevent the protection provided in the circuitry from functioning properly and result in damaging your receiver. This will void your warranty

Activating Your SIRIUS®Subscription

Before beginning to use your new device, you must first register to the SIRIUS®Satellite Radio service.

There are two ways to activate the SIRIUS®Satellite Radio Service:

1. Visit sirius.com and click activate, then follow the on-screen instructions.

2. Call SIRIUS

at 1-866-845-7474. A representative will help you activate your SIRIUS®Satellite Radio Service.

Note: Make sure to have your identification number accessible when calling SIRIUS®.

Make Note of Your Identification Number

Activating your SIRIUS®Satellite Radio Service:

1. Press MENU to enter the Menu Options settings.

2. Press the or button select SIRIUS

ID and press the button to enter the sub menu.

Your own device’s 12-digit SIRIUS

ID Number (ESN) will be displayed on the screen.

Menu Options

Sirius ID

Display Settings

Category 12:00P

FM Transmitter

Lock Options

Channel Add/Skip

Sirius ID

Category 12:00P

ESN 000492228912

Enter Channel

Unsubscribed

Channel

0123456789

NOTE! Use only the appropriate accessories or input devices with your receiver. Use only the 12v Vehicle

Adapter that is provided with the kit. It is important that you do not modify it in any way since this will result in damaging your equipment and void the warranty.

USING THE VEHICLE KIT

INSTALLATION

ATTACH RECEIVER TO SUCTION MOUNT

ATTACH CLIP MOUNT TO RECEIVER

TO USE SUCTION FOLLOW STEPS 3-5

IF YOU HAVE PURCHASED A Boom Box KIT

ROTATE RECEIVER AND CONNECTOR INTO BOOMBOX

LATCH BOOMBOX LOCKS RECEIVER IN PLACE

PUSH RECEIVER ONTO CONNECTOR

INSTALLATION

BASIC OPERATIONS

After your SIRIUS®subscription is activated, the Normal (default) Operation screen will pop up.

Tuning to Different Entertainment Categories

1. Press the CAT button to scroll through music and entertainment categories.

2. Press the CH button to search for channels.

3. When the category you desire is highlighted (for example, “Jazz”), press the button to confirm

the setting. The channel will change and the display will revert to the Default Screen for the new channel.

4. To exit this mode without changing to a new channel, press and hold the button.