SP-C1 Mobile Docking Station Installation Guide
Box Contents
After you unpack your SP-C1 Mobile Docking Station, make sure everything here is included:
1 x Docking Cradle
1 x Audio Cable
1 x Car Power Adaptor
For the latest information about this and other Sportster products, visit www.sirius.com. If anything is
missing or damaged, or if your SP-R1 Receiver or SP-C1 fails to operate, notify your shipper immediately.
It is recommended that you keep the original packaging in case you need to ship your SP-C1 in the future.
1 x Antenna 4 x Machine Screws
2
1 x Adhesive Mount
Sportster SP-C1 User Guide
Safety Precautions
Warning
Take the following precautions to prevent traffic
accidents and avoid personal injury:
• Installation must be performed according to this
installation manual. Sirius is not responsible for
issues arising from installations not performed
according to the procedures in this manual.
• Do not install the unit where it may obstruct your
view through the windshield or of your vehicle’s
indicator displays.
• Do not install the unit where it may hinder the
function of safety devices such as an airbag.
Doing so may prevent the airbag from
functioning properly in the event of an accident.
• The installation and use suggestions contained in
this manual are subject to any restrictions or
limitations that may be imposed by applicable
law—the purchaser should check applicable law
for any restrictions or limitations before installing
and/or operating this unit.
• Failure to follow these safety instructions and
warnings may result in a serious accident.
Sportster SP-C1 User Guide
Caution
Take the following precautions to keep the unit in
proper working order:
• Be sure the unit is connected to a 12V DC power
supply with a negative ground connection.
• Do not install the unit where it will be exposed to
high levels of humidity, moisture, or dust.
• When replacing a fuse, use only a new one with the
proper rating. Using a fuse with the wrong rating
may cause the unit to malfunction.
• To prevent a short circuit when replacing a fuse, first
unplug the car power adapter from the cigarette
lighter.
3
SP-C1 Mobile Vehicle Docking Station Installation Guide
Note: Do not put the SP-R1 Receiver in the docking station until you have completed the installation.
Installation in a Vehicle
1. Determine where you want to
mount the SP-R1 Receiver with
Car Power
Adaptor
Input
Outboard FM
Modulator Port
4
Mounting Adapter
Back Plate
Lock Lever
Antenna
Input
Audio Line
Output
the SP-C1 Mobile Docking Station:
• Do not install the SP-R1
Receiver where it may obstruct
your view through the
windshield or your view of your
vehicle’s indicator displays.
• Do not install the SP-R1
Receiver where it will hinder
your access to the vehicle’s
controls.
• Do not install the SP-R1
Receiver where it may hinder
the function of safety devices
such as an airbag. Doing so
may prevent the airbag from
functioning properly in the event
of an accident.
• Find a location that provides
Sportster SP-C1 User Guide