Sirius Satellite Radio 3SIR-GM1 User Manual

SIRGM1C

GM CLASS-2 BUS COMP A TIBLE

SIRIUS SA TELLITE RADIO TUNER

Installation Guide

Congratulations on your purchase of the SIRGM1C – the GM Compatible SIRIUS Satellite Radio Tuner!

Y our SIRGM1C is designed replace the factory XM Satellite tuner in select GM vehicles. The tuner is also compatible with systems that support Satellite Radio operation but did not come with a tuner from the factory .

Compatibility

The SIRGM1C is designed to be compatible with select headunits from 2003 ~ 2006 in select vehicles that operate on the Class-2 Bus. Please consult the compatibility chart that is included with this product.

Compatible Headunit T ypes:

• CD only Headunits*

• CD + Cassette Headunits*

• 6-CD changer Headunits*

• T ouch Screen Monitor Headunits

• Non-T ouch Screen Monitor Headunits

*Note that the units must have a “BAND” button to access SIRIUS audio modes.

In addition, the SIRGM1C is compatible with most additional factory audio accessories that might be included, such as:

• Rear Seat Audio Control Center

• Rear Seat Entertainment (DVD/ Monitor) System

• Heads up display (HUD)

• Steering wheel controls

Note that the SIRGM1C is not compatible with the factory satellite radio antenna that might be installed in the vehicle. You must install a SIRIUS compatible antenna such as the one included with this product. In addition, some aftermarket Class-2 bus accessories may cause performance or interference problems with the SIRGM1C.

Features

The SIRGM1C is designed to emulate many of the factory SDAR (Satellite Digital Audio Radio) commands found in your vehicle.

• Channel Tune (Up and Down)

• Fast Tune (Up and Down)

• Category Search (Up and Down)

• Category Tune (T une within a category)

• 12 presets (6 for each band)

• Preset Scan (UP)

Note about features listed; Each GM radio type operates differently, so consult the vehicle owners manual for proper operation methods.

Headunit Display Capability

When the SIRGM1C is installed, it has the capability to show the following information on the headunit display .

• Channel Number

• Channel Name

• Category Name

• Artist Name**

• Song Title Name**

**Number of characters displayed varies by headunit type (8 ~16 Characters). Text Scrolling and/or Paging is not supported with the SIRGM.

Note: Some GM headunits will display “XM1” or “XM2” as the display source. This information is hard coded in the

headunit design and cannot be changed.

SIRGM1C Installation Guide

Table of Contents

Package Contents ..............................................................................................3

Warnings and Cautions ..................................................................................... 4

Installation ..........................................................................................................6

Mounting the Tuner ............................................................................................ 6

Installing the Antenna ........................................................................................6

Optimum Antenna Mounting Locations ...........................................................7

Wiring and Cable Connections .........................................................................8

System Connection Examples ........................................................................ 10

Activating Y our SIRIUS Subscription............................................................... 12

Specifications ................................................................................................... 13

Package Contents

SIRGM1C

GM COMPATIBLE

SIRIUS SATELLITE RADIO TUNER

HEADUNIT

SIRGM1C T uner

Mini Magnetic Antenna

Antenna Cable Cover/Tail

Alcohol Swab

Factory SDAR Interface Cable

T-Harness Interface Cable Power Harness with Filter

G H

Mounting Screws (Qty . 6)

SIR-GM1 Operation and Installation Guide

SIRGM1C Installation Guide

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERATE ANY FUNCTION

THAT TAKES YOUR ATTENTION AW A Y FROM SAFEL Y DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

DO NOT OPEN, DISASSEMBLE OR ALTER THE UNIT IN ANY WAY. Doing so may result in fire, electric shock or product damage.

DO NOT INSTALL IN LOCATIONS THAT MIGHT HINDER VEHICLE OPERATION. Doing so may obstruct vision or hamper movement which can result in a serious accident.

DO NOT INSTALL THE UNIT TO HIGH LEVELS OF HUMIDITY, MOISTURE OR DUST . Doing so can result in electric shock or product failure.

FCC Warning: This equipment may generate or use radio frequency energy . Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this User Guide. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

DO NOT INSERT ANY OBJECTS INTO THE UNIT. Doing so may result in fire, electric shock or product damage.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSE. Failure to do so may result in fire, electric shock or product damage.

MAKE THE CORRECT CONNECTIONS. Failure to make proper connections may result in fire or product damage.

DO NOT SPLICE INTO A ELECTRICAL CABLES. Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

Note: This equipment has been tested

and found to comply with Part 15 of the FCC Rules. These rules are designed to provide reasonable protection against harmful interference. This equipment may cause harmful interference to radio communications if it is not installed and used in accordance with these instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:

• Relocate the receiving antenna.

• Consult the dealer or an experienced technician for help.

SIRGM1C Installation Guide

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return the unit to your authorized retailer or nearest service center for repairing.

INSTALL THE WIRING SO THAT IT IS NOT CRIMPED OR PINCHED BY SCREWS OR SHARP MET AL EDGES. Route the cables away from moving parts or sharp pointed edges. This will prevent crimping and damage to the wiring. If the wiring must pass through a metal hole, be sure to use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

USE THE SPECIFIED ACCESSORY PARTS AND INSTALL THE PRODUCT SECURELY. Be sure to use only the specified accessory parts. Use of nonspecified parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose, resulting in hazards or product failure.

COMPATIBILITY

The way the SIRGM1C is installed and used in your vehicle will vary depending on several factors including the make, model and year of the vehicle as well as the factory-installed options. Please refer to the information below for information on the proper method of SIRGM1C installation.

If your vehicle is pre-wired for satellite radio, then you should install the SIRGM1C in the factory satellite radio tuner location using the existing wiring and the ‘factory harness adapter’. Please refer to the factory service manuals for appropriate installation instructions.

If your vehicle is not pre-wired for satellite radio, but it is compatible with the SIRGM1C, then you must use the provided T -harness to connect to the back of your factory headunit.

USE CAUTION IF YOU NEED TO DISCONNECT THE BATTERY TERMINAL. Please consult the vehicle’s owner’s manual or a service technician prior to removing the battery positive or ground connection, as it may cause damage to the vehicle’s electrical system or require reprogramming of the vehicle’s computer-controlled devices.

SIR-GM1 Operation and Installation Guide

SIRGM1C Installation Guide

+ 9 hidden pages