Sirius SL-EM4190X Specifications Sheet
SL-EM 4190X
90CM WALL CANOPY HOOD
FEATURE BENEFIT
Locating the motor away for the hood minimises noise in the kitchen up to 95% while still achieving maximum extraction, Motors
OFF BOARD MOTOR
HALOGEN LIGHTS Energy efficient, Better illumination of cooking area, Longer life span than standard globes, Modern aesthetic
can be installed up to 7 meters away with both indoor and external motors available making these the most versatile units on the
market, no additional power required as motor is powered by a cable from the hood
10MM COMMERCIAL STAINLESS STEEL BAFFLE FILTERS
INDUCTION COUNTDOWN CONTROL
LARGER DUCTING DIAMETER Greater extraction and lower dB rating due to less air flow restriction
CLEAN FILTER INDICATOR Takes the guessing game out of maintaining your hood
MADE IN ITALY Units are designed specifically for the Australian market and manufactured in Italy by dedicated boutique specialist manufacturer
MODEL
SL EM4190X
CONTROL
PANEL
ELECTRONIC
CONTROL
MOTOR EXTRACTION
SEM1
SEM2
Commercial design, Dishwasher safe, Designed for greatest air movement for maximum performance, Easy to fit and remove,
Lifetime filters: last the life of the hood
10 minute auto function used at the end of cooking to reduce condensation build up common to induction cooking. ‘C’ shaped
baffles eliminates moisture dripping onto cooking surface
1200m/3h
1200m.3h
DUCTING
DIAMETER
150mm
LIGHTS FILTER
2x 20W
HALOGEN
10mm STAINLESS
STEEL BAFFLE
ELECTRICAL
REQUIREMENT
10A N/A
dB RATING
PRODUCT
DIMENSIONS
900 x 500 x 670
- 1090
RECOMMENDED DUCTING
FOR INSTALLATION
SEMI RIGID DUCTING
INSTALLATION – 150mm
WALL VENTED
SRPL30-150
12MM GAUGE SEMI RIGID DUCTING - 3 METER
LENGTH
GDC-150
INTERNAL DUCT CONNECTOR
REQUIRES MINIMUM x 1 (TO CONNECT HOOD TO
DUCTING) ADDITIONAL REQUIRED 1 x PER EXTRA
3M DUCT
URC25-215 (PAIR)
UNIVERSAL RING CLAMPS
USED TO CONNECT DUCTING TO EXTERNAL VENT
VENTS:
SDV-150 (RAIN DOME, WALL)
SLV-150 (FIXED ROUND LOUVRE VENT, WALL OR
UNDER EAVE)
INSTALLATION – 150mm
SOLID DUCTING
WALL VENTED
GP10-150 GALV STEEL SOLID DUCTING - 1 METER
LENGTH
GP12-150 GALV STEEL SOLID DUCTING – 1.2
METER LENGTH
GDC-150
INTERNAL DUCT CONNECTOR
REQUIRES MINIMUM x 2 (TO CONNECT DUCTING
TO HOOD AND VENT) ADDITIONAL REQUIRED 1 x
PER EXTRA DUCTING LENGTH
easyFIT BEND OPTIONS
(SELF CONNECTING, NO INTERNAL DUCT
CONNECTOR REQUIRED):
GE45-150 45° ELBOW – GALVANISED STEEL
GE90-150 90° ELBOW – GALVANISED STEEL
VENTS:
SDV-150 RAIN DOME, WALL
SLV-150 FIXED ROUND LOUVRE VENT, WALL OR
UNDER EVE
HINTS AND TIPS ON DUCTING
• The less bends the better the extraction and quieter your hood will be
• Inferior ducting such as PVC, air con ducting and flexible ducting will void your warranty and reduce the efficiency of your hood
• easyFIT connections on Sirius ducting eliminates the need for riveting or taping joins
• For easyKIT options refer website / brochure
• For best results with installation, use only a Sirius preferred installer. Refer website for details
WARRANTY - All Sirius hoods come with a total peace of mind 3 year warranty covering parts and labour.
• Using Sirius branded ducting will increase your warranty to 4 years
• All off board motors come with a full 10 year warranty
• We highly recommend hood installation by a qualified and preferred installer. A list of these installers can be located on our website.
• Incorrect or inferior installation will result in voiding your warranty.
• Please refer to product installation instructions supplied with the hood
• Go to www.arisitwarranties.com to register your product
SOLID DUCTING
INSTALLATION – 150mm
THROUGH ROOF VENTED
GP10-150 GALV STEEL SOLID DUCTING - 1 METER
LENGTH
GP12-150 GALV STEEL SOLID DUCTING – 1.2
METER LENGTH
GDC-150 INTERNAL DUCT CONNECTOR
REQUIRES MINIMUM x 2 (TO CONNECT DUCTING
TO HOOD AND ROOF COWL) ADDITIONAL
REQUIRED 1 x PER EXTRA DUCTING LENGTH
easyFIT BEND OPTIONS
(SELF CONNECTING, NO INTERNAL DUCT
CONNECTOR REQUIRED):
GE45-150 45° ELBOW – GALVANISED STEEL
GE90-150 90° ELBOW – GALVANISED STEEL
ROOF FLASHING (SILICONE SOFT FORMING
ALUMINIUM – 25 YEAR GUARANTEE):
MRF-G102 SUITABLE FOR METAL ROOF
TRF-G075 SUITABLE FOR TILED ROOF
GRC-150 ROOF COWL – GALVANISED STEEL
CONTACT
Arisit Pty Ltd:
ABN: 23 091 515 294
40-44 Mark Anthony Drive
Dandenong South, VIC 3175
Ph: Sales and Service: 1300 762 219
W: www.siriuisbrand.com
Loading...