Sirius SDD2LEMTC880WHSEM7XS, SDD2LEMTC880WHP, SDD2LEMTC880WHPSEM7X, SDD2LEMTC880WHPSEM8, SDD2LEMTC880WHPSEM10 Specifications Sheet

SDD2 L EMTC 880 WH

88CM FLUSH DOWNDRAFT HOOD WITH WHITE PANEL

SDD2 L EMTC 880 WH

Features and Benefits:

DOWNDRAFT WITH FLUSH FIT DESIGN

HIDDEN ALUMINIUM FILTERS

FULL ELECTRONIC TOUCH CONTROL

SAFETY SHUTDOWN

MADE IN ITALY

INBENCH DESIGN

VARIOUS MOTOR LOCATIONS

Perfect for island installation offering an alternative to bulky island hoods, Modern aes­thetic, retractable for unrestricted vision, installed in bench making it versatile for impeded

Aesthetically pleasing, Dishwasher safe, Easy to remove, Effective in the removal of odours,

10 minute auto function used at the end of cooking to reduce condensation build up com­mon to induction cooking.

Sleek, easy to clean touch controls in toughened glass closing mechanism

Units are designed specifically for the Australian market and manufactured in Italy by dedi-

Perfect for island installation – no need for dominating Island hood obstructing the view of and
in your kitchen

Motor can be located indoors up to 5-7 meters away from unit or an external/outdoor motor
can be used.

MULTIPLE VENT OUTLETS

WARRANTY

40-44 Mark Anthony Drive, Dandenong South VIC 3175 Ph: 1300 762 219 Fax: [phone] Website: www.arisit.com

There are several outlet points located on the unit (see above arrows on diagram) for ease and
flexibility of install options

Warranty is 4 years only when Sirius ducting is used. Sirius strongly recommend to use the
correct ducting as to not void warranty and to achieve the ideal result

Distributed by Arisit Pty Ltd

SDD2 L EMTC 880 WH

88CM FLUSH DOWNDRAFT HOOD WITH WHITE PANEL

WARNING! Do not install
below overhead cup­boards as access if re­quired in the case of a
service call. The unit
must be accessible to re­move

Technical Specifications:

MODEL

CONTROL PANEL

MOTOR

EXTRACTION

DUCTING DIAMETER

LIGHTS

FILTER

ELECTRICAL REQUIREMENT

PRODUCT DIMENSIONS

WARNING: technical specifications and product sizes can be varied by the manufacturer, without notice. Cut outs for appliances should only be by physical product measure-

ments. The above information is indicative only.

SDD2 L EMTC880 WH (WHITE PANEL)

TOUCH CONTROL

SEM 7 SEM8 SEM 10

2300m/3h 1650m/3h

200mm

1 x LED

ALMUNIUM MESH

10A

875 x 120 x 742 + 309

Distributed by Arisit Pty Ltd

40-44 Mark Anthony Drive, Dandenong South VIC 3175 Ph: 1300 762 219 Fax: [phone] Website: www.arisit.com