Sirio Antenne IN-GLASS LTE & WLAN Installation Manual
WINDOW HOME INSTALLATIONWINDOW HOME INSTALLATION
ALTERNATIVE INSTALLATIONALTERNATIVE INSTALLATION
INGLASS LTE & WLAN
INGLASS LTE & WLAN
Multi band Mobile Antenna UPGRADED
MAIN FEATURES
·
Upgraded frequency range: from 800MHz
Multi bands coverage antenna for vehicular
applications: LTE, GSM dual, UMTS,
WiMAX, WiFi (IEEE802.11b/g/h)
·
On glass installation
·
3M adhesive tape for permanent fitting
Choose the mounting position
far from metallic parts
S
SIRIO
B Copyright SIRIO antenne - Technical Data are subjected to change - Printed in ITALY - Rev. 23/03/2015 - Cod. ID429
antenne
HI-QUALITY ANTENNAS MADE IN ITALY
SPECIFICATIONSSPECIFICATIONS
MOUNTING INSTRUCTIONSMOUNTING INSTRUCTIONS
Electrical Data
Type :On-glass Indoor Antenna
Frequency Range :800 - 810 MHz @ SWR £ 2.6
(upgraded) 810 - 960 MHz @ SWR £ 2
1.71 - 2.7 GHz @ SWR £ 2
3.3 - 3.8 GHz @ SWR £ 2
5.15 - 5.875 GHz @ SWR £ 2
Impedance :50 W Unbalanced
Radiation :Omnidirectional
Polarization :Vertical
Gain :0 dBd, 2.14 dBi all bands
Max Power :10 Watts from 800 to 2700 MHz
6 Watts from 3.3 to 3.8 GHz
5 Watts from 5.15 to 5.875 GHz
Connector type :SMA Male
Cable Type / Length :RG 174 A/U / 3 m
(other length on request)
Mechanical Data
Materials :PCB, Thermoplastic, Copper
Dimensions (approx.) :57 x 77 x 10 mm
Weight (approx.) :70 gr
Mounting :"On-Glass"
1: Choose the best mounting position by following the drawing below.
2: Morever, we suggest to clean carefully the glass
surface and to proceed with the installation at a
temperature of 20°C or higher.
S.W.R.
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
780
S
ID429
TYPICAL S.W.R. RESPONSE
Model: INGLASS LTE & WLAN
800-960 MHz band
880
SIRIO
antenne
File: F-14-034
980
f.(MHz)
S.W.R.
3.0
2.8
2.6
2.4
1.71-2.7 GHz 3.3-3.8 GHz3.3-3.8 GHz 3.3-3.8 GHz5.15-5.875 GHz
2.2
2.0
1.8
1.6
1.4
1.2
1.0
1600
TYPICAL S.W.R. RESPONSE
Model: INGLASS LTE & WLAN
SWR test effected with 10cm cable
HI-QUALITY ANTENNAS MADE IN ITALY
3800
File: F-14-034
6000
f.(MHz)
3: Remove the protective film avoiding to touch
the adhesive tape with your hands. Proceed by
sticking the antenna on the window and pressing
uniformly on its whole surface to get a perfect
adhesion.
Loading...