Sirio Antenne HP 2070 Installation Manual

HP 2070 HP 2070 R HP 2070 HHP 2070 HP 2070 R HP 2070 H

HP 2070 HP 2070 R HP 2070 HHP 2070 HP 2070 R HP 2070 H

HP 2070 HP 2070 R HP 2070 H

Dual Band Mobile Antennas 2 m Dual Band Mobile Antennas 2 m

Dual Band Mobile Antennas 2 m Dual Band Mobile Antennas 2 m

Dual Band Mobile Antennas 2 m

/

70 cm Bands70 cm Bands

70 cm Bands70 cm Bands

70 cm Bands

Installation ManualInstallation Manual

Installation ManualInstallation Manual

Installation Manual

B Copyright SIRIO antenne - Technical Data are subjected to change - Printed in ITALY - Rev. 23/02/2009 - Cod. ID104&USA

HP 2070 HP 2070 R HP 2070 H

HP-AC/U angular connector:

Frequency Range: from DC to 500 MHz
Overall Size: Ø 41 mm
Mounting Hole: Ø 16 mm
Materials: Brass nichel plated, Teflon
insulator, Gold plated pin
Cable: 5m RG 58 C/U MIL-C-17F / FME-female
Adaptor: FME-male/ UHF-male (PL259)
Antenna connection: UHF-female

P/N 2510805.00 HP-AC/U

ALTERNATIVE MOUNT TYPE

HP MAG H 12 PL:

Frequency Range: from DC to 500 MHz
Overall Size: Ø 92 mm
Materials: Chromed Brass, Nylon, Teflon
insulator, Gold plated pin
Cable: 3.6 m RG 58 C/U MIL-C-17F / FME-female
Adaptor: FME-male / UHF-male (PL259)
Antenna connection: UHF-female

P/N 2511802.05 HP MAG H 12 PL

HP MAG 125 PL:

Frequency Range: from DC to 500 MHz
Overall Size: Ø 127 mm
Materials: Chromed Brass, Nylon, Teflon i
insulator, Gold plated pin
Cable: 3.6 m RG 58 C/U MIL-C-17F / FME-female
Adaptor: FME-male / UHF-male (PL259)
Antenna connection: UHF-female

P/N 2511202.05 HP MAG 125 PL

DESCRIPTION

Dual-band vehicular antenna working on 2m and 70 cm bands. The very best materials have
been used to guarantee the maximum strength and the best performance. The whip, made of
17/7 PH stainless steel, has an inclination system that allows the 90o tilting without using keys or
tools. Also a particular attention has been paid to the UHF-male connector with a goldplated
center pin, "Teflon" insulator and silicone rubber gasket for a perfect waterproofing.

SPECIFICATIONS

Electrical Data

Type : HP 2070 VHF 1/4 λ, UHF 5/8 λ

: HP 2070 R, HP 2070 H VHF 1/2 λ, UHF 2 x 5/8 λ

Frequency Range : HP 2070 VHF:141-149 MHz, UHF: 422-447 MHz

: HP 2070 USA VHF:142-150 MHz, UHF: 432-457 MHz
: HP 2070 R, HP 2070 H VHF:142-148 MHz, UHF: 430-440 MHz
: HP 2070 R USA, H USA VHF:143-149 MHz, UHF: 440-450 MHz

@ SWR ≤ 2

Impedance : 50 Ω
Radiation (H-plane) : 360° Omnidirectional
Polarization : Vertical
Gain : HP 2070 VHF 0 dB, UHF 2 dB ref. to λ/4 whip

: HP 2070 R VHF 0.6 dB, UHF 4.6 dB ref. to λ/4 whip
: HP 2070 H VHF 0.7 dB, UHF 4.4 dB ref. to λ/4 whip

Max Power : VHF 150 Watts, UHF 100 Watts (CW) @ 30° C
Grounding Protection: All metal parts are DC-grounded. HP 2070: the inner conductor shows

a DC-short. HP 2070 H,R: the inner conductor is coupled capacitively

Connector type : UHF-male (PL 259)

Mechanical Data

Materials : Stainless Steel 17/7 PH, Nylon, Chromed Brass
Height (approx.) : HP 2070 / HP 2070 USA 445 mm / 442 mm

: HP 2070 R / HP 2070 R USA 1000 mm / 997 mm
: HP 2070 H / HP 2070 H USA 1080 mm / 1065 mm

Weight (approx.) : 300 gr

ID104&USA

ADJUSTMENT: all SIRIO HP Antennas are factory
adjusted and no additional tuning is usually required.
However, if the center frequency needs to be changed,
please follow these simple directions:

1. Release the allan-screws on the whip using the supplied
key

2. Move the whip in or out as needed to obtain a low
SWR at your prefered frequency range.

3. After tuning, re-tighten the allan-screws to lock the
whip.

TILTING: all SIRIO HP Antennas have
an inclination system that allows the
90° tilting without use keys or special
tools.

HI-QUALITY ANTENNAS MADE ITALY