SIrin LABS SR00300W User Manual

User Manual - CE / FCC / IC Safety Warning Notice

To prevent possible hearing damage, do not listen at high volume

levels for long periods.

SIRIN LABS Phone FINNEY U1 Model : SR00300-W

FCC ID: 2AIP8-SR00300W IC: 21579-SR00300W

Safety Guidelines & User Manual

Basic safety

Please follow these suggestions and safeguards to decrease the chances of damage to your product,
accessories, or any connected devices, and to lessen the risk of harm or injury, such as from fire, burns, or
electric shock:
! Use the product for its intended purposes only.
! Do not open or take apart your product, adapter, or accessories.
! Do not crush, perforate, drop, throw, or try to deform your product, adapter, or accessories.
! Do not short external contacts or circuits, expose your product or adapter to open flames or lit
substances, or dispose of them in fire, solvents, or water.
! Do not use the product or adapter if they aren't working properly or have been damaged, cracked, or
dropped.
! Do not expose the product or adapter to water or other liquids.
! If the product or adapter gets wet, do not try to dry it using any household device such as an oven,
microwave, or hair dryer.
! Do not twist, pinch, or tie the USB cable.
! This product is intended for use with a certified Class 2 limited power source rated: max load current 3A at 5V, 3A at 9V, 2.5A at 12V. 2A
at 15V
! The product and charger generate heat during normal operation. Avoid prolonged, direct, or indirect skin
contact, since this may result in discomfort or burns.
! Some applications or prolonged usage may increase product temperature.
! If the product feels hot, discontinue use and close all applications or turn off the product until it cools.
! Ensure that the area around the product is adequately ventilated. Covering the product affects air flow,
which can trap heat and redirect it back to the product. This may affect product performance, and poses a
possible risk of fire or explosion, which could lead to serious bodily injuries or property damage.

Prevention of Hearing Loss

REGULATORY & COMPLIANCE INFORMATION
FCC DECLARATION OF CONFORMANCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio TV technician for help.
For more information, refer to the online help system on www.sirinlabs.com/support/finney/safety/

FCC CAUTION

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by party responsible for compliance could void the
user authority to operate this equipment.

INDUSTRY CANADA INFORMATION

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Avis d’industrie Canada

Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation
est autorisee aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en
compromettre le fonctionnement."

Industry Canada Class B Emission Compliance Statement

This Class B digital apparatus complies with Canadian CAN ICES-3 (B) / NMB-3 (B)

Avis de conformite a la reglementation d’Industrie Canada

Cet appareil numerique de la classe B est conforme a la norme CAN ICES-3 (B) / NMB-3 (B) du Canada.

This device is restricted to indoor use due to its operation in the 5.15 to 5.25GHz frequency range.
Les dispositifs fonctionnant dans la bande 5.15-5.25GHz sont reserves uniquement pour une utilisation a l'interieur afin de reduire
les risques de brouillage prejudiciable aux systemes de satellites mobiles utilisant les memes canaux.

High-power radars are allocated as primary users (i.e. priority users) of the bands 5.25 to 5.35GHz and 5.65 to 5.85GHz and that
these radars could cause interference and/or damage to LE-LAN devices.
Les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont designes utilisateurs principaux
(c.-a-d., qu'ils ont la priorite) pour les bandes 5.25-5.35GHz et 5.65-5.85GHz et que ces radars pourraient causer du brouillage
et/ou des dommages aux dispositifs.

"5GHz band (W52,W53): Indoor use only" (登録局との通信を除く）/ "5.2/5.3GHz 屋内使用限定 (登
録局との通信を除く）"

RADIATION EXPOSURE STATEMENT:

The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are
safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the
product can be kept as far as possible from the user body or set the device to lower output power if such function is
available.

DÉCLARATION D'EXPOSITION AUX RADIATIONS:

Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le
Canada etablies pour un environnement non controle.
Le produit est sur pour un fonctionnement tel que decrit dans ce manuel. La reduction aux expositions RF
peut etre augmentee si l'appareil peut etre conserve aussi loin que possible du corps de l'utilisateur ou
que le dispositif est regle sur la puissance de sortie la plus faible si une telle fonction est disponible.

RF Exposure Information (SAR)

This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to
the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of
tissue) in countries that follow the United States FCC limit, and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the
Council of the European Union limit. Tests for SAR are conducted using standard operating positions with the device transmitting at its
highest certified power level in all tested frequency bands.

To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and
body. Carry this device at least 10 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose
the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this
manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines,
in a manner that has not been tested or certified, and use such accessories should be avoided.

The highest FCC SAR values for the device are as follows:

• 0.43 W/kg@1g (Head)

• 1.18 W/kg@1g (Body)