Sip 01308, 01315 User Manual

24

FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,

OR SIP DIRECTLY ON:

TEL: [phone]

EMAIL: [e-mail] or [e-mail]

www.sip-group.com

Ref: 061216

Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip
and place into the appropriate recycling bin.

Never dispose of electrical equipment or batteries in with
your domestic waste. If your supplier offers a disposal facili­ty please use it or alternatively use a recognised re-cycling
agent. This will allow the recycling of raw materials and help
protect the environment.

1

Please read and fully understand the instructions in this manual

before operation. Keep this manual safe for future reference.

01308 / 01315

14” Abrasive Cut Off Saw

2

23

Declaration of Conformity

We

SIP (Industrial Products) Ltd

Gelders Hall Road

Shepshed

Loughborough

Leicestershire

LE12 9NH

England

As the manufacturer's authorised representative within the EC

declare that the

14” Abrasive Cut Off Saw - SIP Part No. 01308

14” Abrasive Cut Off Saw (110v) - SIP part No. 01315

Conforms to the requirements of the following directive(s), as indicated.

2006/42/EC Machinery Directive
2014/30/EU EMC Directive
2011/65/EU RoHS Directive

Signed: …………………………………...

Mr P. Ippaso - Managing Director - SIP (Industrial Products) Ltd
Date: 06/12/2016.

And the relevant harmonised standard(s), including

DECLARATION OF CONFORMITY

EN61029-1:2009+A11:2010

EN61029-2-10:2010+A11:2013

EN55014-1:2006+A1:2009+A2:2011

EN55014-2:2015

EN61000-3-2:2014

EN61000-3-11:2000

22

NOTES

3

CONTENTS

Page No. Description

4. Safety Symbols Used Throughout This Manual

4. Safety Instructions

9. Electrical Connection

10. Guarantee

10. Contents and Accessories

11. Technical Specification

12. Getting to Know Your Abrasive Cut Off Saw

13. Operating Instructions

14. Maintenance

15. Wiring Diagram

16. Exploded Drawing

17. Parts List - 01308

19. Parts List - 01315

23. Declaration of Conformity

4

When using your abrasive cut off saw, basic safety precautions should always be fol­lowed to reduce the risk of personal injury and / or damage to the abrasive cut off
saw.
Read all of these instructions before operating the abrasive cut off saw and save this
user manual for future reference.
The abrasive cut off saw should not be modified or used for any application other
than that for which it was designed.
This abrasive cut off saw is designed to cut all types of ferrous metals.
If you are unsure of its relative applications do not hesitate to contact us and we will
be more than happy to advise you.
Before each use of the abrasive cut off saw always check no parts are broken and
that no parts are missing.
Always check that the disc bolt is tight before, during and after operation.
Always operate the abrasive cut off saw safely and correctly.

KNOW YOUR ABRASIVE CUT OFF SAW: Read and understand the owner's manual and
labels affixed to the abrasive saw. Learn its applications and limitations, as well as the
potential hazards specific to it.
KEEP WORK AREA CLEAN AND WELL LIT: Cluttered work benches and dark areas invite
accidents. Floors must not be slippery due to oil, water or sawdust etc.
DO NOT USE THE ABRASIVE CUT OFF SAW IN DANGEROUS ENVIRONMENTS: Do not use
the abrasive cut off saw in damp or wet locations, or expose it to rain. Provide ade-

SAFETY SYMBOLS USED THROUGHOUT THIS MANUAL

SAFETY INSTRUCTIONS

IMPORTANT: Please read the following instructions carefully, failure to do
so could lead to serious personal injury and / or damage to the abra­sive cut off saw.

Danger / Caution: Indicates risk of personal injury and/or the possibility of

damage.

Warning: Risk of electrical injury or damage!

Note: Supplementary information.

21

NOTES